1. Sustainable
aluminum matrix composites (Al MMCs) reinforced with rice husk fly ash (RHA):
Mechanical and wear performance Aman Nigam, Biplab Hazra, Bijay Kumar Show Materials Science and
Technology
SCI
2026
2025
2. Comparing
Conventional Cold Compaction and Sintering and Spark Plasma Sintering in
Consolidating Mechanically Alloyed Cu-Based Cu–Zr Supersaturated Alloy Powder Amar Mahato, Debashis Ghosh, Sachin Balbande, Bijay Kumar Show, Supriya Bera Transactions of the Indian Institute of Metals
SCI
2025
2025
3. Sequential phase
evolution of copper mold cast Al-Cu-Ni-(Zr) alloys: Zirconium Micro-alloying
results in ultrahigh hardness (~ 5 GPa) Sagar Das, Shubhadeep Maity, Sougata Barik, Parthiban Ramasamy, Bijay Kumar Show, Jürgen Eckert, Supriya Bera Materials
Characterization
SCI
2025
2025
4. Advent of low-density superhard orthorhombic diamond based 24 % quartz
composite Joydeep Maity, Biplab Hazra, Mousumi Mallick, Aman Kumar Lal Das, Bijay Kumar Show Journal of Alloys and Compounds
SCI
2025
2024
5. Microstructural modification
and simultaneous enhancement of strength, ductility in a novel nano-composite Md. Imran Rizwi, Durbadal Mandal, Bijay Kumar Show Materials Today
Communications
SCI
2024
2023
6. "Wear Behavior of a Novel Hybrid Aluminium Based
Nanocomposite." Rizwi, Md Imran, Shubhadip Paul, Biplab Hazra, Durbadal Mandal, and Bijay Kumar Show. Journal of Materials Engineering and Performance
SCI
2023
2023
7. "Fascinating microstructural evolution during consolidation and
remarkable hardening behaviour of micro alloyed Al-Cu-Ni alloys." Maity, Shubhadeep, Bijay Kumar Show, and Supriya Bera Advanced Powder Technology
SCI
2023
2023
8. "Development of Wear Resistant Aluminum Based Nano-Composite
Reinforced With Nano-AlN." Rizwi, Md Imran, Durbadal Mandal, and Bijay Kumar Show. Journal of Tribology
SCI
2023
2022
9. Temperature-Dependent Wear Characteristics of a
High-Voltage Low-Current Electric Energy-Treated AISI 1080 Steel. Mousumi Mallick, Biplab Hazra, Swapan Kumar Mitra, Debasish Basak, Bijay Kumar Show &
Joydeep Maity
Journal of Materials Engineering and Performance
SCI
2022
2021
10. High temperature wear micromechanisms in
Al–17Si–5Cu alloy after an isothermal heat treatment Biplab Hazra, Supriya Bera & Bijay Kumar Show Canadian Metallurgical Quarterly
SCI
2021
2019
11. Enhanced elevated
temperature wear resistance of Al-17Si-5Cu alloy after a novel short duration
heat treatment Biplab Hazra, Supriya Bera and Bijay Kumar Show International Journal of Minerals, Metallurgy and
Materials
SCI
2019
2019
12. Tribological property enhancement of 3Y-TZP ceramic by the combined effect of CaF2 and MgO phases, Accepted for publication. Subhrojyoti Mazumder, Bharat Bidhan Barad, Bijay Kumar Show, Nilrudra Mandal Ceramics International
45, 13447-13455
SCI
https://doi.org/10.1016/j.ceramint.2019.04.044
ELSEVIER
2019
2019
13. Microstructural modification and ageing behaviour of the Al–17Si–5Cu alloy using a novel approach Biplab Hazra, Karuna Sindhu Ghosh, Rajdeep Sarkar, Supriya Bera & Bijay Kumar Show Materials Science and Technology
35(13), 1632-1641
SCI
10.1080/02670836.2019.1636178
TAYLOR & FRANCIS
2019
2019
14. Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys Shubhadeep Maity, Dipak Kr Chanda, Parthiban Ramasamy, Bijay Kumar Show, Jürgen Eckert, Supriya Bera Metallurgical and Materials Transactions A
Published Online
SCI
https://doi.org/10.1007/s11661-019-05518-0
SPRINGER
2019
2019
15. Enhanced elevated temperature wear resistance of Al-17Si-5Cu alloy after a novel short duration heat treatment Biplab Hazra, Supriya Bera and Bijay Kumar Show International Journal of Minerals, Metallurgy and Materials
26(3), 360-368
SCI
https://doi.org/10.1007/s12613-019-1745-5
SPRINGER
2019
2019
16. Synthesis and characterization of calcium fluoride added zirconia toughened alumina composite powder Kishor Kumar Sadhu, Subhrojyoti Mazumder, Poulomi Roy, Sourav Acharya, Bijay Kumar Show and Nilrudra Mandal IOP Conf. Series: Materials Science and Engineering
561
SCOPUS
10.1088/1757-899X/561/1/012080
IOP Science
2019
2018
17. Coexistence of adjacent vacancy-ordered and eutectic phases in Al–Cu–Ni alloys Shubhadeep Maity, Dipak Kr Chanda, Parthiban Ramasamy, Bijay Kumar Show, Jürgen Eckert & Supriya Bera Philosophical Magazine Letters
98(11), 486-493
SCI
10.1080/09500839.2019.1581381
TAYLOR & FRANCIS
2018
2018
18. Severe-to-mild wear transition at higher temperatures in Al-17Si-5Cu alloy after short-duration isothermal heat treatment Biplab Hazra, Supriya Bera and Bijay Kumar Show Philosophical Magazine Letters
98(12), 556-566
SCI
10.1080/09500839.2019.1597992
TAYLOR & FRANCIS
2018
2018
19. Improvement in dry sliding wear resistance of Al-17Si-5Cu alloy after an enhanced heat treatment process Biplab Hazra, Pankaj Baranwal, Supriya Bera and Bijay Kumar Show Transactions of Nonferrous Metals Society of China
28, 1705-1713
SCI
10.1016/S1003-6326(18)64814-9
ELSEVIER
2018
2018
20. Effect of microalloying constitutes-A novel approach to ordering phenomenon Shubhadeep Maity, Subhabrata Chakraborty, Bijay K Show and Supriya Bera Journal of Alloys and Compounds
769, 940-950
SCI
https://doi.org/10.1016/j.jallcom.2018.08.018
ELSEVIER
2018
2017
21. Simultaneous enhancement of ductility and strength in AISI 1080 steel through a typical cyclic heat treatment. S. Mishra, A. Mishra, B. K. Show, J. Maity Materials Science & Engineering A
688, 262-271
SCI
http://dx.doi.org/10.1016/j.msea.2017.02.003
ELSEVIER
2017
2017
22. Effect of cooling rate on microstructure and mechanical properties of eutectoid steel under cyclic heat treatment S. Maji, A. R. Subhani, B. K. Show and J. Maity Journal of Materials Engineering and Performance
26(1), 3058-3070
SCI
10.1007/s11665-017-2779-3
ASM International
2017
2017
23. Accelerated lamellar disintegration in eutectoid steel S. Mishra, A. Mishra, B. K. Show, J. Maity Philosophical Magazine Letters
97(4), 140-149
SCI
10.1080/09500839.2017.1295170
TAYLOR & FRANCIS
2017
2016
24. Tribological behaviour of a 0.33 % ‘C’ dual phase steel with pre I/C ‘hardening and tempering’ treatment under abrasive wear condition N. Shukla, H. Roy and B. K. Show Tribology Transactions
59(4), 593-603
SCI
10.1080/10402004.2015.1094841
TAYLOR & FRANCIS
2016
2016
25. Effect of prior austempering heat treatment on the microstructure, mechanical properties and high stress abrasive wear behaviour of a 0.33 % C dual phase steel N. Shukla, H. Roy and B. K. Show Canadian Metallurgical Quarterly
55(1), 13-22
SCI
10.1080/00084433.2015.1113671
TAYLOR & FRANCIS
2016
2015
26. Effect of Pre-intercritical Annealing Treatments on the Microstructure and Mechanical Properties of 0.33% Carbon Dual-Phase Steel N. Shukla, S. Das, S. Maji, S. R. Chowdhury and B. K. Show Journal of Materials Engineering and Performance
24(12), 4958-4965
SCI
DOI 10.1007/s11665-015-1750-4
ASM International
2015
2015
27. Triological behaviour of an aluminium matrix composite with Al4SiC4 reinforcement under dry sliding condition. D. Kumar, H. Roy and B. K. Show Tribology Transactions
58, 518–526
SCI
10.1080/10402004.2014.990594
TAYLOR & FRANCIS
2015
2015
28. Wear behaviour of cooling slope rheocast A356 Al alloy P. Das, B. K. Show, A. Rathore and S. Samanta Tribology Transactions
58, 1054-1066
SCI
10.1080/10402004.2015.1040905
TAYLOR & FRANCIS
2015
2014
29. Dry sliding wear behaviour of a novel 6351 Al-(Al4SiC4 + SiC) hybrid composite B. K. Show, D. K. Mondal, and J. Maity Journal of Materials Engineering and Performance
23(3), 875-897
SCI
10.1007/s11665-013-0829-z
ASM International
2014
2014
30. Wear behavior of a novel aluminum-based hybrid composite B. K. Show, D. K. Mondal, and J. Maity Metallurgical and Materials Transactions A
45A, 1027-1040
SCI
10.1007/s11661-013-2044-9
SPRINGER
2014
2014
31. Effect of prior heat treatment on wear behaviour of 0.23% carbon dual phase steel S. Bhowmick and B. K. Show Canadian Metallurgical Quarterly
53(1), 93-99
SCI
10.1179/1879139513Y.0000000106
TAYLOR & FRANCIS
2014
2014
32. Dry sliding wear behaviour of aluminium based metal matrix composites with single (Al2O3) and hybrid (Al2O3+SiC) reinforcements. B. K. Show, D. K. Mondal, and J. Maity Metallography, Microstructure, and Analysis
3, 11-29
SCOPUS
10.1007/s13632-013-0113-5
SPRINGER
2014
2014
33. Dry sliding wear behaviour of 6351 Al-(4 vol.% SiC + 4 vol.% Al2O3) hybrid composite B. K. Show, D. K. Mondal, and J. Maity Journal of Materials Engineering and Performance
23(12), 4278-4288
SCI
10.1007/s11665-014-1219-x
ASM International
2014
2013
34. Development of a novel 6351Al–(Al4SiC4+SiC) hybrid composite with enhanced mechanical properties B. K. Show, D. K. Mondal, K. Biswas, and J. Maity Materials Science & Engineering A
579, 136–149
SCI
http://dx.doi.org/10.1016/j.msea.2013.04.105
ELSEVIER
2013
2013
35. Effect of prior heat treatment on microstructure and mechanical properties of 0.23% carbon dual phase steel S. Bhowmick, B. R. Ghatak, and B. K. Show International Heat Treatment and Surface Engineering
7(2), 85-91
SCOPUS
10.1179/1749514813Z.00000000055
TAYLOR & FRANCIS
2013
2010
36. Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel B.K. Show, R. Veerababu, R. Balamuralikrishnan, and G. Malakondaiah Materials Science & Engineering A
527, 1595–1604
SCI
10.1016/j.msea.2009.10.049
ELSEVIER
2010
Conferences
ID
Details
Year
2023
1.Synthesizing
Cu-Zr alloys for Electrical Contacts, Amar Mahato, Mehul Gupta, S. Arulmozhiselvar, Sattam Roy,
Diyala Dey, Supriya
Bera , Bijay Kumar Show,
77th
Annual Technical Meeting of NMD-ATM 2023,
KIIT, Bhubaneswar
22-24 November 2023
2023
2023
2.Tribological Performance Analysis of Copper Mold Cast Al-Cu-Ni alloys, Sagar Das, Priyanshi Singh, Pragya Chakraborty, Pratibha Gouda,
Surjadeep Ghosh, Bijay Kumar Show, Supriya Bera
International
Conference on TRANSLATIONAL RESEARCH: METALS & MATERIALS 2023 TRMM 2023 19
th–21 st NOVEMBER 2023, Ranchi, IndiaAbstract Published in the Conference Proceedings
Page No.-17-18
2023
2023
3.Fabrication and Characterization of Aluminum-Based Hybrid Composite via
Stir Casting Method, Md Imran Rizwi, Durbadal Mandal, Bijay Kumar Show
International
Conference on TRANSLATIONAL RESEARCH: METALS & MATERIALS 2023 TRMM 2023 19th
–21st NOVEMBER 2023, Ranchi,
IndiaAbstract Published in the Conference Proceedings
Page No.-28
2023
2023
4.Tribological behaviour of Al-Cu-Ni alloys with and without microalloying, Sagar Das, Shubhadeep Maity, Md Imran Rizwi, Bijay Kumar Show and
Supriya Bera
Emergent
Materials for Energy and Environment (EMEE-2023) in IIT Roorkee during March
4-5, 2023 Abstract Published
in the Conference Proceedings
Page No.-94
2023
2023
5.Microstructure-property correlation and wear behavior of nano-TiN
reinforced aluminium metal matrix composite, Md Imran Rizwi, Sagar Das, Durbadal Mandal and Bijay Kumar Show
Emergent
Materials for Energy and Environment (EMEE-2023) in IIT Roorkee during March
4-5, 2023 Abstract Published
in the Conference Proceedings
Page No.-95
2023
2022
6.Comparison of the Mechanical Characteristics of Epoxy Resin Reinforced
with Carbon Fiber under Various Fiber Orientations, Ajay Kumar Mishra, B. K. Show, and M.M. Ghosh
Presented in the International Conference "NMD ATM 2022" held
at Hyderabad, India during Nov. 13 - 16, 2022 and Abstract Published in the
Conference Proceedings
2022
2022
7.Multiscale Simulation and Experimental Approach to Design Carbon Fibre
Reinforced Epoxy Polymer Composites, Ajay Kumar Mishra, B K Show, and M M Ghosh
International Conference "ISTAM
2022" held at IIT Mandi, India during Dec. 14 - 16, 2022 and Abstract
Published in the Conference Proceedings.
2022
2022
8.Development of Cu-Zr alloys by Mechanical alloying, Amar Mahato, Atharva Vilas Vyawahare, Supriya Bera, Bijay Kumar Show
NMD-ATM-2022, Hyderabad
2022
2019
9.Development of rice husk fly ash based aluminium metal
matrix composite with improved wear behavior, Aman
Nigam, Biplab Hazra and Bijay Kumar Show
NMD-ATM 2019 Thiruvananthapuram
2019
2019
10.Microstructure
modification in Al−17Si−5Cu alloy after a solutionizing heat treatment process, Biplab Hazra,
Sayan Das, Ankita Biswas , Anindita Biswas,Bijit Sarkar and Bijay Kumar Show
NMD-ATM 2019 Thiruvananthapuram
2019
2018
11.Microstructural modifications of cast Al-17Si-5Cu
alloy through isothermal heat treatment, B. Hazra, P. Baranwal, S. Bera and B. K. Show
Proceedings of National Conference on Advanced Materials, Manufacturing
and Metrology (NCAMMM-2018), p. 26, CSIR-CMERI, Durgapur, W.B., INDIA
2018
2017
12.Effect of isothermal heat
treatment on the microstructure and wear properties of an Al-17Si-5Cu alloy, B. Hazra, S. Bera and B. K. Show
71th Annual Technical Meeting of NMD-ATM 2017, BITS Pilani- KK Birla, Goa campus
2017
2017
13.Tribological behaviour of Al-Si-Mg alloys at room temperature as well as elevated temperature, B. Hazra, P. Baranwal, S. Bera
and B. K. Show
Proceedings of National Conference on Advanced functional materials:
Processing and Characterisation
2017
2016
14. Study of microstructural modification of a hypereutectic Al-Si alloy
using semi-solid heat treatment, B. Hazra, P. Baranwal, S. Bera and B. K. Show
70th Annual Technical Meeting of IIM, NMD-ATM-2016, IIT Kanpur
2016
2016
15.Study of microstructural modification of a hypoeutectic Al-Si alloy using semi-solid heat treatment, C. Dutta, B. Hazra and B. K. Show
70th Annual Technical Meeting of IIM, NMD-ATM-2016, IIT Kanpur
2016
2016
16.Microstructure-property correlation of
different Al-Si alloys in as cast
condition, B. Hazra, P. Baranwal, S. Bera and B. K. Show
70th Annual Technical Meeting of IIM, NMD-ATM-2016, IIT Kanpur
2016
2015
17.Synthesis and Characterisation of β-Zr based alloys prepared by high
energy ball milling, S. Maity, S. Sanyal, A. Pal, S. Chabri, , B.K.Show, A. Sinha and S. Bera
International Conference on Frontiers in materials Science and
Technology, National Institute of Science and Technology, Odisha, INDIA,
2015
2015
18.Synthesis and Characterisation of Ti based alloys prepared by high
energy ball milling, S. Maity, A. Pal, S. Chabri, , A. Sinha, B.K.Show and S. Bera
International Conference on nanomaterials and nanotechnology, K.S. Rangasamy College of Technology, Tamil
Nadu
2015
2015
19.Synthesis of β-Ti from high energy ball milling, S. Maity, A. Pal, S. Chabri, B.K.Show, A. Sinha and S. Bera
Young Scientist colloquium-2015, MRSI-Kolkata Chapter
2015
2014
20.Effect
of pre-intercritical annealing treatments on the microstructure and mechanical
properties of a 0.33 % ‘C’ dual phase steel, N. Shukla, S. Das, S. Maji, S. R. Chowdhury, B.K.Show
International Conference on Advanced Materials and Energy Technology
(ICAMET) 2014, IIEST, Shibpur, Howrah , W.B, INDIA
2014
2014
21. “Structure-Property correlation
of a novel 6351 Al-(Al4SiC4 + SiC) hybrid composite, B. K. Show, D. K. Mondal, and J. Maity
NMD ATM 2014, 68th Annual Technical Meeting of The Indian
Institute of Metals, , College of Engineering, Pune, INDIA.
2014
2013
22.Mechanical Property and Wear Behaviour of as
cast 6351 Al-8 vol. % SiC Composite, S. K. Shaw, D. Dey, B. K. Show, and Dr
Joydeep Maity
BTTD – 2013, CSIR-NML, Jamshedpur
2013
Books
ID
Title
Technical Report:
Title
Author(s)
Report No.
Page & Year of
Publication
Publishing organization
Air Induction Melting of DMR249A Naval Steels at AV Alloys Ltd.
Bijay Kumar show,
B. Rajendra Prasad and G. Balachandran
DMRL TR 2007 430
Pages- 1-22
June 2007
Defence Metallurgical research Laboratory, Hyderabad
DRDO, Ministry of Defence, GOI, P.O-Kanchanbagh, Hyderabad-500058, INDIA
1.
Technical Report:
Title
Author(s)
Report No.
Page & Year of
Publication
Publishing organization
Air Induction Melting of DMR249A Naval Steels at AV Alloys Ltd.
Bijay Kumar show,
B. Rajendra Prasad and G. Balachandran
DMRL TR 2007 430
Pages- 1-22
June 2007
Defence Metallurgical research Laboratory, Hyderabad
DRDO, Ministry of Defence, GOI, P.O-Kanchanbagh, Hyderabad-500058, INDIA
Patents
ID
Details
Patent Filed Year
Awards and Recognitions
Ranked 18th (All India Rank) in Graduate Aptitude Test for Engineers (GATE), conducted by Government of India in 2003.
Received Merit Scholarship during first and second year of B.E for standing first in order-of-merit in NIT, Durgapur (Formerly R.E. College).
Administrative Responsibilities
Warden, Hall-XI from 2016-2018.
UG Course Coordinator From 02/2019- 12/2021
HoD, MME from 06/2024 to 06/2026
Contact
Mobile : +91-9434788184 Email : bkshow.mme@nitdgp.ac.in , bijayshow@gmail.com
ERP
