|
Doctor of Philosophy (Ph.D) |
Metallurgical and Materials Engineering, I.I.T Kharagpur
|
2004 |
|
Master of Technology (M.Tech) |
Metallurgical and Materials Engineering, I.I.T Kharagpur
|
1998 |
|
Bachelor of Engineering (B.E) |
Metallurgical Engineering, Jadavpur University |
1996 |
| Associate Professor | Department of Metallurgical and Materials Engineering, NIT Durgapur, India |
27th June 2022 to till date |
|
Assistant Professor (AGP 8000) |
Department of Metallurgical and Materials Engineering, NIT Durgapur |
3rd Sept 2014 to 26th June 2022 |
|
Sr. Scientist (GP-7600) |
National Metallurgical Laboratory, Jamshedpur-831007, India |
July 2010 to 2nd Sept 2014 |
|
Post Doc Research Fellow (BOYSCAST Fellowship 2008-09) |
Dept of Metallurgical and Materials Engineering, University of Alabama, Tuscaloosa, Al, USA |
Aug 2009 to July 2010 |
|
Scientist (GP-6600) |
National Metallurgical Laboratory, Jamshedpur-831007, India |
July 2006 to June 2010 |
|
Jr. Scientist (GP-5400) |
National Metallurgical Laboratory, Jamshedpur-831007, India |
July 2004 to June 2006 |
|
Lecturer |
Dept of Metallurgical and Materials Engineering, NIT Warangle, AP |
July 2003 to May 2004 |
Physical Metallurgy:
Microstructure-Property correlation of Materials,
Solidification and Alloy Development,
Semi-Solid Process, Metal Matrix Composites
Development of Advanced Steels
| Title | Investigator | Co-investigator | Sponsered Agency | Duration | Status | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Development of Al-Si alloys with and without grain refiner or eutectic modifier by strain-induced melt activation process |
Durbadal Mandal | -- | SERB-DST Govt of India | 3 years | Ongoing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Completed |
Subjects Taught in Undergraduate:
MM-503 :Heat Treatment of Materials
MM-541 : Basic Manufacturing Processes
MM-602 : Engineering Materials
MM-702 : Corrosion and Degradation of Materials
MM-810 : Experimental Techniques in Metallurgy
MM-553 : Heat Treatment of Metals and Alloys Laboratory
MM-652 : Engineering Materials Laboratory
MM-753 : Seminar
Subjects Taught in M.Tech
MT-2001 : Technology of Advanced Materials
| Sl.No. | Title | Name of the PI | Name of the CoPIs | Funding Agency | Amount (Rs.) | Project Type | Project Status | Date of Initiation | Date of Completion |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Development, Demostration and Training of Coke/Coal based brass melting furnace for rural artisans | Dr Durbadal Mandal | - | CSIR-NML | 400,000 | Sponsored | Completed | Oct 2013 | Sep 2014 |
| 2 | Study on the formation of intermetallics during annealing treatment of galvanized steels | -- | Dr Durbadal Mandal | CSIR-NML | 1,000,000 | Sponsored | Completed | Oct 2013 | Sep 2014 |
| 3 | Rolling of spray formed steel+copper bi-layered materials for bearing applications | Dr Durbadal Mandal | Bimetal Bearing Ltd, Coimbatore, TN | 337,000 | Sponsored | Completed | Oct 2013 | March 2014 | |
| 4 | Development of cast austempered Fe-Mn-Si-V Steels | Dr Durbadal Mandal | CSIR-NML | 1,224,000 | Sponsored | Completed | Oct 2004 | July 2006 | |
| 5 | Development of Slit Erosion Resistant Material for Turbines of Hydro generator | -- | Dr Durbadal Mandal | CPRI, Bangalore | 29,979,000 | Sponsored | Completed | Nov 2006 | Oct 2011 |
| 6 | Development of Brass Coated Al base alloys for rural Artisans | Dr Durbadal Mandal | CSIR (CSIR-800) | 320,000 | Sponsored | Completed | May 2012 | Sep 2013 | |
| 7 | Development of advanced light weight metallic materials for engineering applications | -- | Dr Durbadal Mandal | CSIR | 95,000,000 | Sponsored | Completed | May 2008 | March 2012 |
| 8 | Development of synthetic slag to control the inclusions in high carbon steel suitable for making wires | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 2,737,646 | Sponsored | Completed | March 2012 | March 2013 |
| 9 | Effect of Solid Particles Erosion on the Life of Powder Plant Components | -- | Dr Durbadal Mandal | CSIR-NML | 1,000,000 | Sponsored | Completed | March 2004 | Aug 2007 |
| 10 | Development and Evaluation of Wear Resistance Materials | -- | Dr Durbadal Mandal | CSIR-NML | 100,000 | Sponsored | Completed | Mar 2008 | Feb 2009 |
| 11 | Effect of combination of synthetic slag and carry over slag of LF to control the inclusions in high carbon steel wire rod | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 2,134,840 | Sponsored | Completed | June 2013 | March 2014 |
| 12 | To study the effect of several process parameter on interfacial Al content during Hot-Dip Galvanizing process. | -- | Dr Durbadal Mandal | CSIR-NML | 1,600,000 | Sponsored | Completed | Jan 2005 | July 2007 |
| 13 | Technology for assessment and refurbishment of engineering materials and components | -- | Dr Durbadal Mandal | CSIR | 300,000,000 | Sponsored | Completed | Feb 2008 | March 2012 |
| 14 | Development of API grade 80X pipeline steels (2nd Phase) (member) | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 3,662,936 | Sponsored | Completed | Dec 2012 | May 2014 |
| 15 | Development of Gas base Brass Melting Furnace for Rural Artisan of Moradabad | Dr Durbadal Mandal | CSIR (CSIR-800) | 1,750,000 | Sponsored | Completed | Dec 2011 | Sep 2013 | |
| 16 | Development and forming of performance driven special steels | -- | Dr Durbadal Mandal | CSIR | 200,000,000 | Sponsored | Completed | Aug 2007 | March 2012 |
| 17 | Development of Light Steels-Steel Foams | -- | Dr Durbadal Mandal | TATA Steel | 1,612,500 | Sponsored | Completed | Aug 2007 | July 2008 |
| 18 | Study on deformation behavior of TWIP steels by acoustic emission | -- | Dr Durbadal Mandal | CSIR-NML | 500,000 | Sponsored | Completed | April 2007 | March 2008 |
| 19 | Rolling and heat treatment process optimization of various alloy steels | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 2,646,000 | Sponsored | Completed | Apr 2013 | July 2014 |
| 20 | Alloy Design and Casting of CRGO Steel | -- | Dr Durbadal Mandal | CSIR-NML | 2,636,000 | Sponsored | Completed | Apr 2013 | Sep 2014 |
| 21 | Hot air jet erosion testing on different materials | Dr Durbadal Mandal | Kennametal Bengalore | 359,552 | Sponsored | Completed | Apr 2012 | Oct 2012 | |
| 22 | Production of standard grade ferro-silicon using banded hematite quartzite and Jhama coal | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 6,000,000 | Sponsored | Completed | Apr 2012 | March 2013 |
| 23 | Reliability base Uncertainty Modeling of Rolling Process | -- | Dr Durbadal Mandal | CSIR-NML | 310,000 | Sponsored | Completed | Apr 2011 | March 2012 |
| 24 | Development of Rheocast Mg-alloys for application in Engineering Industries | -- | Dr Durbadal Mandal | DST Govt of India | 2,200,400 | Sponsored | Completed | Apr 2008 | March 2011 |
| 25 | Development of Al-Si alloys with and without grain refiner or eutectic modifier by strain induced melt activation process | Dr. Durbadal Mandal | -- | DST-SERB | 2,405,400 | Sponsored | Ongoing | 2019-12-04 | 2022-12-03 |
| Sl.No. | Title | Name of the PI | Name of the CoPIs | Funding Agency | Amount (Rs.) | Project Type | Project Status | Date of Initiation | Date of Completion |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Development, Demostration and Training of Coke/Coal based brass melting furnace for rural artisans | Dr Durbadal Mandal | - | CSIR-NML | 400,000 | Sponsored | Completed | Oct 2013 | Sep 2014 |
| 2 | Study on the formation of intermetallics during annealing treatment of galvanized steels | -- | Dr Durbadal Mandal | CSIR-NML | 1,000,000 | Sponsored | Completed | Oct 2013 | Sep 2014 |
| 3 | Rolling of spray formed steel+copper bi-layered materials for bearing applications | Dr Durbadal Mandal | Bimetal Bearing Ltd, Coimbatore, TN | 337,000 | Sponsored | Completed | Oct 2013 | March 2014 | |
| 4 | Development of cast austempered Fe-Mn-Si-V Steels | Dr Durbadal Mandal | CSIR-NML | 1,224,000 | Sponsored | Completed | Oct 2004 | July 2006 | |
| 5 | Development of Slit Erosion Resistant Material for Turbines of Hydro generator | -- | Dr Durbadal Mandal | CPRI, Bangalore | 29,979,000 | Sponsored | Completed | Nov 2006 | Oct 2011 |
| 6 | Development of Brass Coated Al base alloys for rural Artisans | Dr Durbadal Mandal | CSIR (CSIR-800) | 320,000 | Sponsored | Completed | May 2012 | Sep 2013 | |
| 7 | Development of advanced light weight metallic materials for engineering applications | -- | Dr Durbadal Mandal | CSIR | 95,000,000 | Sponsored | Completed | May 2008 | March 2012 |
| 8 | Development of synthetic slag to control the inclusions in high carbon steel suitable for making wires | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 2,737,646 | Sponsored | Completed | March 2012 | March 2013 |
| 9 | Effect of Solid Particles Erosion on the Life of Powder Plant Components | -- | Dr Durbadal Mandal | CSIR-NML | 1,000,000 | Sponsored | Completed | March 2004 | Aug 2007 |
| 10 | Development and Evaluation of Wear Resistance Materials | -- | Dr Durbadal Mandal | CSIR-NML | 100,000 | Sponsored | Completed | Mar 2008 | Feb 2009 |
| 11 | Effect of combination of synthetic slag and carry over slag of LF to control the inclusions in high carbon steel wire rod | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 2,134,840 | Sponsored | Completed | June 2013 | March 2014 |
| 12 | To study the effect of several process parameter on interfacial Al content during Hot-Dip Galvanizing process. | -- | Dr Durbadal Mandal | CSIR-NML | 1,600,000 | Sponsored | Completed | Jan 2005 | July 2007 |
| 13 | Technology for assessment and refurbishment of engineering materials and components | -- | Dr Durbadal Mandal | CSIR | 300,000,000 | Sponsored | Completed | Feb 2008 | March 2012 |
| 14 | Development of API grade 80X pipeline steels (2nd Phase) (member) | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 3,662,936 | Sponsored | Completed | Dec 2012 | May 2014 |
| 15 | Development of Gas base Brass Melting Furnace for Rural Artisan of Moradabad | Dr Durbadal Mandal | CSIR (CSIR-800) | 1,750,000 | Sponsored | Completed | Dec 2011 | Sep 2013 | |
| 16 | Development and forming of performance driven special steels | -- | Dr Durbadal Mandal | CSIR | 200,000,000 | Sponsored | Completed | Aug 2007 | March 2012 |
| 17 | Development of Light Steels-Steel Foams | -- | Dr Durbadal Mandal | TATA Steel | 1,612,500 | Sponsored | Completed | Aug 2007 | July 2008 |
| 18 | Study on deformation behavior of TWIP steels by acoustic emission | -- | Dr Durbadal Mandal | CSIR-NML | 500,000 | Sponsored | Completed | April 2007 | March 2008 |
| 19 | Rolling and heat treatment process optimization of various alloy steels | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 2,646,000 | Sponsored | Completed | Apr 2013 | July 2014 |
| 20 | Alloy Design and Casting of CRGO Steel | -- | Dr Durbadal Mandal | CSIR-NML | 2,636,000 | Sponsored | Completed | Apr 2013 | Sep 2014 |
| 21 | Hot air jet erosion testing on different materials | Dr Durbadal Mandal | Kennametal Bengalore | 359,552 | Sponsored | Completed | Apr 2012 | Oct 2012 | |
| 22 | Production of standard grade ferro-silicon using banded hematite quartzite and Jhama coal | -- | Dr Durbadal Mandal | TATA STEEL, Jamshedpur | 6,000,000 | Sponsored | Completed | Apr 2012 | March 2013 |
| 23 | Reliability base Uncertainty Modeling of Rolling Process | -- | Dr Durbadal Mandal | CSIR-NML | 310,000 | Sponsored | Completed | Apr 2011 | March 2012 |
| 24 | Development of Rheocast Mg-alloys for application in Engineering Industries | -- | Dr Durbadal Mandal | DST Govt of India | 2,200,400 | Sponsored | Completed | Apr 2008 | March 2011 |
| 25 | Development of Al-Si alloys with and without grain refiner or eutectic modifier by strain induced melt activation process | Dr. Durbadal Mandal | -- | DST-SERB | 2,405,400 | Sponsored | Ongoing | 2019-12-04 | 2022-12-03 |
| Sl.No. | Title | Name of the PI | Name of the CoPIs | Funding Agency | Amount (Rs.) | Project Type | Project Status | Date of Initiation | Date of Completion |
|---|
| ID | Details | Year |
|---|---|---|
| 2023 | 1. Wear behavior of a novel hybrid aluminium based nano-composite Imran Rizwi, B. Hazra, Subhadip Paul, D. Mandal, B.K Show Journal of Materials Engineering and Performance Published online on 6th Oct 2023 SCI https://doi.org/10.1007/s11665-023-08780-x Springer | 2023 |
| 2023 | 2. Effect of Stirring on Characteristics of Electrochemically Exfoliated Graphene G. Awasthi, K. Mistry, N. Jamnapara, M. Salot, K. Santhy, D. Mandal, S.K Chaudhury Materialia Vol 30, 101818 SCI https://doi.org/10.1016/j.mtla.2023.101818 Elsevier | 2023 |
| 2023 | 3. Effect of structural refinement and modification on the mechanical properties of Al-7Si alloy Chandan Choudhary, H.N Bar, Sk. Md. Arif, K.L Sahoo, D.Mandal Journal of Materials Engineering Materials and Performance Published on line on 19th May 2023 SCI https://doi.org/10.1007/s11665-023-08313-6 Springer | 2023 |
| 2023 | 4. Optimization of Sea Beach sand composition for Cast Iron Foundry Applications Gaurav Pandya, Vatsal Ramani, Gaurav Awasthi, D.K Basa, D. Mandal, Sujoy Krishna Chaudhury Materials Transactions (Japan) 64 (1), 260-266 SCI https://doi.org/10.2320/matertrans.MT-F2022003 Japan Foundry Engineering Society | 2023 |
| 2023 | 5. Compressive failure analysis of in-situ Al-Mg2Si composites: An experimental and finite element based study Prosanta Biswas, Durbadal Mandal, Manas Kumar Mondal Engineering Fracture Mechanics 277, 108986 SCI Elsevier | 2023 |
| 2023 | 6. A New Electrolytic Process for synthesis of tungsten oxide nanopowder from WC-6Co scrap M. Salot, K. Santhy, D. Mandal, A. Awasthi, S.K Chaudhury Ceramics International 49, 1507-1512 SCI Elsevier | 2023 |
| 2023 | 7. Development of wear resistant aluminium based nano-composite reinforced with nano-AlN Imran Rizwi, D. Mandal, B.K Show, Journal of Tribology 145, 021702-1-10 SCI ASME | 2023 |
| 2022 | 8. Effect of Quenching and Partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steels Sk. Md. Arif. S. Ghorai H.N Bar, D. Mandal Materials Today: Proceedings 66, 3865-3869 SCOPUS Elsevier | 2022 |
| 2022 | 9. Evaluation of Microstructure and Mechanical Properties of M-SIMA Processed Al-7Si alloy Chandan Choudhary, A.K Pramanik, K.L Sahoo and D.Mandal Materials Science and Technology 38 (13) 912-925 SCI https://doi.org/10.1080/02670836.2022.2067614 Taylor& Francis | 2022 |
| 2022 | 10. Effect of strain induced melt activation process on the microstructure and mechanicl properties of Al-5Ti-1B treated Al-7Si alloy Chandan Choudhary, H.N Bar, A.K Pramanik, K.L Sahoo and D.Mandal Metals and Materials International 28 (11) 1763-1777 SCI https://doi.org/10.1007/s12540-021-01154-9 Springer | 2022 |
| 2022 | 11. Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy Chandan Choudhary, K.L Sahoo, Himadri Roy and D.Mandal Journal of Engineering Materials and Performace 31 (4) & 3262-3273 SCI https://doi.org/10.1007/s11665-021-06413-9 ASM International | 2022 |
| 2022 | 12. Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel Alok Srivastava , Ashok kamaraj, Durbadal Mandal, Kallol Mandal , Gopi K Mandal Metals and Materials International 28 (7) & 1763-1777 SCI https://doi.org/10.1007/s12540-021-01060-0 Springer | 2022 |
| 2020 | 13. Microstructure and Physical Properties of Short Steel Fiber Reinforced Al Based Composites Durbadal Mandal, S.C. Panigrahi and S.K. Chaudhury Canadian Metallurgical Quarterly 59(4) 405-416 SCI Tayler & Francis | 2020 |
| 2020 | 14. Failures analysis of in-situ Al–Mg2Si composites using actual microstructure based model Prosanta Biswas, Durbadal Mandal, Manas Kumar Mondal Materials Sci and Engg A 797, 140155 SCI https://doi.org/10.1016/j.msea.2020.140155 Elsevier | 2020 |
| 2020 | 15. Microstructural Changes and Quality Improvement of Al7Si0.2Mg (356) Alloy by Die Vibration Meet C Mehta, D.Mandal, Sujoy Krishna Chaudhury International Journal of Metal Casting 14 (4) 987-998 SCI Springer | 2020 |
| 2020 | 16. New Mg-Ca-Zn amorphous alloys: biocompatibility, wettability and mechanical properties, MaterialiaNew Mg-Ca-Zn amorphous alloys: biocompatibility, wettability and mechanical properties Sudeep Paul, Parthiban Ramasamy, Mitun Das, Durbadal Mandal, Oliver Renk, Mariana Calin, Jürgen Eckert, Supriya Bera Materialia 12, 100799 SCI Elsevier | 2020 |
| 2020 | 17. Processing and characterization of modified strain-induced melt activation processed Al-Si alloys Chandan Choudhary, K.L Sahoo and D.Mandal Materials Science and Technology 36 (2), 181-193 SCI Taylor & Francis | 2020 |
| 2020 | 18. The Effect of Modified Strain Induced Melt Activation (Modified SIMA) Process on the Microstructure and Mechanical Properties of Al-7Si alloy Chandan Choudhary, K.L Sahoo and D. Mandal Light Metals 277-281 Others doi.org/10.1007/978-3-030-36408-3_40, Springer | 2020 |
| 2019 | 19. Exploring near eutectic compositions: Synthesis of new glassy Mg-Ca-Zn alloys with exceptionally low Young’s Modulus Supriya Bera, Sudeep Paul, Parthiban Ramasamy, Durbadal Mandal, Mitun Das, Alice Lassing, Mariana Calin, Jürgen Eckert Scripta Materialia, 173, 139-143 SCI Elsevier | 2019 |
| 2019 | 20. Influence of Alloying Elements and Grain Refiner on Microstructure, Mechanical and Wear Properties of Mg-Al-Zn Alloys D. Mandal, Laxmi Murmu, Chandan Choudhary, K.L Sahoo Canadian Metallurgical Quaterly, 58 (2) (2019) 241-251 SCI Taylor & Francis | 2019 |
| 2019 | 21. Effects of Amplitude of Die Vibration on Cast Structure of Al-4.5Cu alloy Meet C Mehta, D.Mandal, Sujoy Krishna Chaudhury International Journal of Metal Casting 13(2) 438-449 SCI Springer | 2019 |
| 2019 | 22. The Effect of Thermo-Mechanical Processing on the Microstructure and Mechanical Properties of Modified SIMA Treated Al-7Si Alloy Chandan Choudhary, K.L Sahoo, D. Mandal Light Metals 2019, 241-249 Others Springer | 2019 |
| 2019 | 23. Effect of Mg2Si concentration on the Dry sliding Wear Behaviour of Al-Mg2Si Composite Prosanta Biswas, M.K Mondal, D. Mandal Journal of Tribology 141, 081601-11 SCI ASME | 2019 |
| 2019 | 24. Micromechanical response of Al-Mg2Si composites using approximated representative volume elements (RVEs) model Prosanta Biswas, Durbadal Mandal, Manas Kumar Mondal Materials Research Express 6, 1165c6 SCOPUS IOPscience | 2019 |
| 2018 | 25. Microstructure and Mechanical Properties of Al-Si alloys processed by strain induced melt activation Chandan Choudhary, K.L Sahoo and D.Mandal Materials Today: Proceedings 5, 27107-27111 SCOPUS Elsevier | 2018 |
| 2018 | 26. Finite element analysis of stress strain localization and distribution in Al-4.5Ch-2Mg alloy Rahul. Bhandari, Prosanta Biswas, Manas Kumar Mondal, Durbadal Mandal Trans. Nonferrous Met. Soc. China 28, 1200-1215 SCI Elsevier | 2018 |
| 2018 | 27. Effect of microstructural morphology on microscale deformation behavior of Al-4.5Cu-2Mg alloy P. Biswas, R. Bhandari, M. K. Mondal, D. Mandal Archives of Metallurgy and Materials 63 (4) 1575-1586 SCI Others | 2018 |
| 2017 | 28. Microstructure evolution and hardness property of in situ Al-Mg2Si composites using one step gravity casting method Prosanta Biswas, Manas Kumar Mondal, H. Roy, Durbadal Mandal Canadian Metallurgical Quaterly 56 (3) 340-348 SCI Taylor & Francis | 2017 |
| 2017 | 29. Synthesis and Effect of Misch Metal on Mechanical Properties of Conventional Cast Mg-Al-Zn-Sn-Pb alloy System G Gaurav, Q. Murtaza, N. Yuvraj, D. Mandal, K.L. Sahoo and L. Murmu Proceedings of the Institute of Mechanical Engineering, Part L: Journal of Materials Design and Applications 231 (7) 627-637 SCOPUS SCImago | 2017 |
| 2015 | 30. Neural Modeling and Experimental investigation of the erosion characteristic of boiler grade steels impacted by fly ash Suchandan K Das, Durbadal Mandal and K.L.Sahoo Journal of Materials Engineering and Performance 24 (9) 3513-3526 SCI Springer | 2015 |
| 2014 | 31. Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304 LN stainless steel K. Barat, H.N.Bar, D. Mandal, H. Roy, S. Sivaprasad and S. Tarafder Materials Science and Engineering A 597, 37-45 SCI Elsevier | 2014 |
| 2014 | 32. Microstructure and Mechanical Properties of Al-7Si alloy: Conventional and Modified Strain Induced Mechanical Activation (SIMA): A Comparative study D. Mandal, Chandan Choudhary, S.K. Mitra and Sukomal Ghosh Indian Foundry Journal 60 (9) 21-27 Others Others | 2014 |
| 2014 | 33. Energy Efficient Brass melting pit furnace-a push for excellence for brassware artisans D. Mandal, Palash Poddar, K. K. Paul and K. L. Sahoo Indian Foundry Journal 60 (1) 41-45 Others Others | 2014 |
| 2014 | 34. Evolution of Microstructure and Mechanical Properties Under Different Austempering holding time of cast Fe-1.5Si-1.5Mn-V Steels D. Mandal, M.Ghosh, J.Pal, P.K.De, S.GhoshChoudhuri, S.K.Das, G.Das and Sukomal Ghosh Materials Design 54 831-837 SCI Elsevier | 2014 |
| 2013 | 35. Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124 Al base composite D.Mandal, S. Viswanathan Materials Characterization 86 , 21-27 SCI Elsevier | 2013 |
| 2013 | 36. Effect of Heat Treatment on Microstructure and Interface of SiC Particles Reinforced 2124 Al Matrix Composite D.Mandal, S. Viswanathan Materials Characterization 85 ,73-81 SCI Elsevier | 2013 |
| 2012 | 37. Metallurgical Heritage of India: Preservation and Rejuvenation K.L.Sahoo, D.Mandal, K.K.Paul and Sukomal Ghosh Science and Culture (Indian Science News Association) 78 (11-12), 532-536 Others Others | 2012 |
| 2011 | 38. Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600oC, J.K.Sahu, D.K.Das, T.K.Nandy, D.Mandal, V.Rajinikanth, J.Swaminathan and A.K.Ray Materials Science & Engineering A, 530, 664-668 SCI Elsevier | 2011 |
| 2011 | 39. Measuring uncertainties of metal working process in computational simulation; a novel approach A.K.Datta, D.Mandal and K.L.Sahoo Journal of Metallurgy and Materials Science 53 (2), 183-187 SCI Others | 2011 |
| 2010 | 40. Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade" A.K. Ray, S.C. Bose, P.K. De, H.K. Das, D. Mandal, Z. Alam, V.S.R.A. Sharma, and D.K. Das Canadian Metallurgical Quaterly 49 (2) 191-204. SCI Taylor & Francis | 2010 |
| 2010 | 41. Influence of Coating and Alloy Additions on the Distribution of Fibers and Hardness of Cast Aluminium Base Short Steel Fiber Reinforced Composites D.Mandal, B.K.Dutta and S.C.Panigrahi Material Science and Technology 26 (10) 157-163 SCI Taylor & Francis | 2010 |
| 2009 | 42. Effect of Austempering treatment on Microstructure and Mechanical Properties of high Si Steel D. Mandal, M.Ghosh, J.Pal, P.K.De, B.A.Lakra, S.GhoshChoudhuri, S.K.Das, G.Das and Sukomal Ghosh Journal of Material Science 44, 1069-1075 SCI Springer | 2009 |
| 2009 | 43. Microstructural Study of Galvanized Coatings Formed in Pure as well as Commercial Grade Zn Bath G.K.Mandal, D.Mandal, S.K.Das, R.Balasubramanium, S.P.Mahrotra Transaction of The Indian Institute of Metals 62(1) 35-40 SCI Springer | 2009 |
| 2008 | 44. Effect of wt% Reinforcement on Microstructure and Mechanical Properties of Al-2Mg base Short Steel Fiber Composites D.Mandal, B.K.Dutta. and S.C.Panigrahi Journal of Materials Processing Technology 198, 195-201 SCI Elsevier | 2008 |
| 2008 | 45. Effect of Copper and Nickel Coating on Short Steel Fiber Reinforcement on Microstructure and Mechanical Properties of Alumunium Matrix Composites D. Mandal. B.K.Dutta and S.C.Panigrahi Material Science and Engineering A 492 (1-2) 346-352 SCI Elsevier | 2008 |
| 2008 | 46. Wear Properties of Copper Coated Short Steel Fiber reinforced Stir Cast Al-2Mg alloy composites D.Mandal. B.K.Dutta and S.C.Panigrahi Wear 265 (5-6) 930-939 SCI Elsevier | 2008 |
| 2007 | 47. Influence of Coating on Short Steel Fiber Reinforcements on Corrosion Behavior of Aluminium Base short steel fiber reinforced Composites D.Mandal, B.K.Dutta, S.C.Panigrahi Journal of Material Science, 42 (8) 2796-2801 SCI Springer | 2007 |
| 2007 | 48. Effect of Coating on the Wear Properties of Stir Cast Al-2Mg base Short Steel Fiber Reinforced Composites D.Mandal. B.K.Dutta and S.C.Panigrahi Materials Science and Engineering A 460-461 485-493 SCI Elsevier | 2007 |
| 2007 | 49. Dry Sliding Wear Behavior of Stir Cast Aluminium base Short Steel Fiber Reinforced Composites D.Mandal, B.K.Dutta. and S.C.Panigrahi Journal of Materials Science 42 (7) 2417-2425 SCI Springer | 2007 |
| 2007 | 50. Influence of Mechanical Working on Properties of Aluminium Base Short Steel Fiber Reinforced Composites D.Mandal, B.K.Dutta. and S.C.Panigrahi Journal of Materials Science 42 (20) 8622-8628 SCI Springer | 2007 |
| 2007 | 51. Processing and Mechanical Properties of Al, Al-2Mg and Al-4Cu Alloy base Short-Steel Fiber Reinforced Composites Prepared by Vortex Method D.Mandal. B.K.Dutta and S.C.Panigrahi Material Science and Technology 23 (1) 23-28 SCI Taylor & Francis | 2007 |
| 2006 | 52. Microstructure and Mechanical Properties of Al-2Mg Alloy Base Short Steel Fiber Reinforced Composites Prepared by Vortex Method D.Mandal, B.K.Dutta. and S.C.Panigrahi Journal of Materials Science 41 4764-4770 SCI Springer | 2006 |
| 2004 | 53. Wear and Friction Behavior of Stir Cast Aluminium Base Short Steel Fiber Reinforced Composites D.Mandal, B.K.Dutta. and S.C.Panigrahi Wear 257, 654-664 SCI Elsevier | 2004 |
| 2001 | 54. Influence of Thermo Mechanical Processing route on the Mechanical Properties of Forging Quality Micro alloyed Steels D. Mandal, A.K. Chacrabarti and K.K. Ray Trans of The Indian Inst of Metal 54 (1-2) 41-47 SCI Springer | 2001 |
| ID | Details | Year |
|---|---|---|
| 2022 | 1.Sk. Md. Arif. H.N Bar, D. Mandal, Study the microstructure, hardness and tensile properties of low carbon microalloyed steels processed through quenching and partitioning treatment, DMRL-Hyderabad, 13 to 16th Nov 2022 | 2022 |
| 2021 | 2.Chandan Choudhary, K.L Sahoo and D. Mandal, Enhancement in Strength and ductility of Al-14Si alloy by Microstructural Modification in Modified SIMA Process, 69th Indian Foundry Congress, IIF (online), 2nd - 5th Sept Kolkata, WB | 2021 |
| 2021 | 3.Sk. Md. Arif. H.N Bar, D. Mandal, Study the Microstructural Evaluation and Mechanical Properties of low carbon microalloyed steels through QP techniques, 58th NMD and 74th ATM 2020 (online), 23rd Feb - 26th Feb IIT Bombay | 2021 |
| 2020 | 4.Sudeep Paul, R. Parthiban, M. Das, D. Mandal, Mariana Calin, Jurgen. Eckert, S. Bera, Mechanical Degradation Biocompatibility study of Mg-Ca-Zn alloy prepared by Melt spinning route, 33rd National Conference on 'Climate Responsive Technologies vis-a-vis Iron and Steel Production Scenario' Institute of Engineers, Jan 17-18 Durgapur, India | 2020 |
| 2019 | 5.Chandan Choudhary, K.L Sahoo, Durbadal Mandal, A Novel Microstructure in Modified Strain Induced Melt Activation Process of Al-Si-7wt.% alloy, 57th NMD and 73rd ATM, 14th-16th Nov Kovalam, Thiruvananthapuram | 2019 |
| 2019 | 6.Ramesh Kumar, D. Mandal, B. Maji and A.K Mandal, Effect of copper and chromium on microstructure, mechanical and wear properties of Al-Fe alloy, 57th NMD and 73rd ATM, 14th-16th Nov Kovalam, Thiruvananthapuram | 2019 |
| 2019 | 7.Durbadal Mandal, Chandan Choudhary, K.L Sahoo, Structure-Property correlation of Al-Si alloy processed by Modified Strain Induced Melt Activation (M-SIMA) Process, 57th NMD and 73rd ATM,14th-16th Nov 2019 Kovalam, Thiruvananthapuram, | 2019 |
| 2019 | 8.Prosanta Biswas, Durbadal Mandal and Manas Kumar Mondal, Actual Microstructure based finite elemental analysis of failure prediction in Al-Mg2Si composite, 57th NMD and 73rd ATM, 14th-16th Nov Kovalam, Thiruvananthapuram | 2019 |
| 2019 | 9.Sudeep Paul, R. Parthiban, M. Das, D. Mandal, Mariana Calin, Jurgen. Eckert, S. Bera, Development of amorphous Mg-Ca-Zn alloy by Melt spinning Route, 57th NMD and 73rd ATM, 14th-16th Nov 2019 Kovalam, Thiruvananthapuram | 2019 |
| 2019 | 10.Sk Md Arif, D. Mandal, H.N Bar, Meet C Mehta and S.K Chaudhury, Effect of age hardening on microstructure and mechanical properties of LM-25 aluminium alloy prepared through mould vibration method, 57th NMD and 73rd ATM, 14th-16th Nov Kovalam, Thiruvananthapuram | 2019 |
| 2018 | 11.Chandan Choudhary, K.L. Sahoo, D.Mandal, Effect of modified SIMA process on Sr modified Al-7Si alloy, 56th NMD and 72th ATM,2018, 14th-16th Nov 2018 Kolkata | 2018 |
| 2018 | 12.Sudip Paul, D.Mandal, S.Bera, Development of Mg-Ca based alloy for biomedical applications, 56th NMD and 72th ATM,2018, 14th-16th Nov Kolkata | 2018 |
| 2018 | 13.Sk. Md. Arif. H.N Bar, D. Mandal, Study the Low Cycle Fatigue on 7055Al alloy at two stage age hardening condition, 56th NMD and 72th ATM,2018, 14th-16th Nov Kolkata | 2018 |
| 2017 | 14.Chandan Choudhary, D. Mandal,K.L. Sahoo, Effect of Grain Refiner and Modifier on Microstructure and Mechanical Properties of hypoeutectic Al-7Si alloy, 55th NMD and 71th ATM,2017, 11-14th Nov BITS Pilani, Goa | 2017 |
| 2017 | 15.Prosanta Biswas, Manas Kumar Mondal, Durbadal Mandal, Effects of K2ZrF6and KBF4 Combine Addition on Microstructure and Hardness of Al-15Mg2Si-5Si In-situ Composite, 55th NMD and 71th ATM,2017, 11-14th Nov BITS Pilani, Goa | 2017 |
| 2017 | 16.Chandan Choudhary, K.L. Sahoo, D.Mandal, Influence of grain refiner on Microstructure and Mechanical Properties of Al-7Si alloy, International Conference on Advances in Materials & Processing: Challenges & Opportunity, 30th Nov- 2nd Dec IIT Roorkee | 2017 |
| 2017 | 17.Chandan Choudhary, D. Mandal,K.L. Sahoo, Effect of Grain Refiner and Modifier on Microstructure and Mechanical Properties of hypoeutectic Al-7Si alloy, 55th NMD and 71th ATM,2017, 11-14th Nov BITS Pilani, Goa | 2017 |
| 2017 | 18.Chandan Choudhary, K.L. Sahoo, D.Mandal, Microstructure and Mechanical Properties of Al-14Si alloy produced by Modified SIMA Processed, International Conference on Sustainable Manufacturing, Automation and Robotics Technologies (IC-SMART), Durgapur, 15-16th Dec CSIR-CMERI, Durgapur | 2017 |
| 2017 | 19.Chandan Choudhary, K.L Sahoo, D. Mandal, "The Effect of Time on the Microstructure and Mechanical Properties of Modified SIMA Treated Al-7Si Alloy" International Conference on Advance in Materials and Manufacturing (ICAMM-2017), 19-21st Jan (full Paper) NIFFT, Ranchi, India | 2017 |
| 2016 | 20.Chandan Choudhary, K.L Sahoo, D. Mandal, "Microstructure and mechanical properties of Al-Si alloys processed by Strain Induced Melt Activation" International Conference on Advance in Materials and Manufacturing (ICAMM-2016), 08-10th Dec (full Paper) Hyderabad, India | 2016 |
| 2016 | 21.Prosanta Biswas, Manas Kumar Mondal, Durbadal Mandal, "Effects of extra Si content on the microstructure and mechanical properties of In-situ Al-15Mg2Si composite" 54th NMD and 70th ATM, 11-14th Nov IIT Kanpur | 2016 |
| 2016 | 22.D.Mandal, S.K. Sharma, Chandan Choudhary, K.L. Sahoo, Effect of Processing Routes and Process Parameters on the Microstructure and Mechanical Properties Al-Cu-Mg alloy" The 4th International Conference on Advances in Materials & Materials Processing (ICAMMP-IV), 5-7th Nov IIT Kharagpur | 2016 |
| 2016 | 23.Chandan Choudhary, K.L Sahoo, D. Mandal, "The effect of modified SIMA process on the microstructure and mechanical properties of Al-7Si alloy" 54th NMD and 70th ATM, 11-14th Nov IIT Kanpur | 2016 |
| 2016 | 24.Prosanta Biawas, M.K. Mondal, D. Mandal. "Microstructure Evolution of In-Situ Al-Mg2Si Composites" International Conference on Metal and Materials Research (ICMR 2016), June 20-22. IISc, Bangalore | 2016 |
| 2016 | 25.Rahul Bhandari, Prosanta Biswas, Manas Kumar Mondal, Durbadal Mandal, "Deformation Behaviour of Al-Cu-Mg alloys Actual RVEs at Microlevel" The 4th International Conference on Advances in Materials & Materials Processing (ICAMMP-IV), , 5-7th Nov IIT Kharagpur | 2016 |
| 2014 | 26.A. K. Srivastava, M. M. Humane, D. Mandal, S. K. Sahay, R. K. Minj & G. K. Mandal, “Influence of Inclusions on drawability of high carbon steel wire rod” Student’s seminar “Behind the Teacher’s Desk (BTTD-2014), 27-28th March. CSIR-NML, Jamshedpur | 2014 |
| 2014 | 27.G.K. Mandal, D. Mandal, V.C. Srivastava, Tipu Kumar, S.K. Das, Chiradeep Ghosh, R.S. Pais, Monojit Datta and L.C. Pathak “Strip Annealing Simulation of Galvanised Steel” National Conference on Thermo-Mechanical Simulation using Gleeble Systems, 10-12th July. IIT Mardas, Chennai | 2014 |
| 2014 | 28.Tipu Kumar, G.K. Mandal, D. Mandal, Janak Lal, S.Mishra and V.C. Srivastava “Physical Simulation of X80 grade linepipe steel for thin slab casting and rolling” National Conference on Thermo-Mechanical Simulation using Gleeble Systems, 10-12th July. IIT Mardas, Chennai | 2014 |
| 2013 | 29.D. Mandal, K.K. Paul, P. Poddar and K.L. Sahoo: “Development of Efficient Brass Melting Coal Base Furnace for Rural Artisans” Presented in 9th All India Peoples Technology Congress, Organized by Forum of Scientists Engineers and Technologists (FOSET), 8-9th Feb (Full Paper). Science City, Kolkata | 2013 |
| 2013 | 30.D.Paswan, S.Ghorai, M.Malathi, D.Mandal, S.Prasad, S.Agarwal, R.k.Minj, S.D.Singh and A.K.Vaish, “Production of Ferrosilicon using Banded Hametite, Quartzite and Jhama coal” Presented at National Seminar on Exploitation of Lean Grade Ore: Challenges, Problems and Solution (LGO-2013)” The Institution of Engineers (India) Jamshedpur Chapter, association with CSIR-NML, Jamshedpur-831007, 22-23rd Jan. CSIR-NML, Jamshedpur | 2013 |
| 2013 | 31.A.K. Srivastava, M. M. Humane, R. K. Minj, D. Mandal, S.K.Sahay , R. B. V. Ramana, G.K.Mandal, Effect of combination of synthetic slag and carry over slag of LF to control the inclusions in high carbon steel wire rod, NMD-ATM 2013, 12th - 15th Nov. IIT (BHU) Varanasi | 2013 |
| 2013 | 32.G.K.Mandal, M..M.Humane, R.K.Minj, D.Mandal, S.K.Das, K.Mukherjee, S.Prakash, R.B.V Ramana, and T. Venugopalan: “Inclusion control in high carbon steel suitable for tire cords using synthetic slag treatment” Published in Proceedings of International conference on Advanced in Refractoriness and Clean steel Making, Organized by Steel Authority of India Ltd, R&D Centre for iron and Steel association with Mecon Ltd, June 22-26 (Full Paper). RDCIS, Ranchi | 2013 |
| 2012 | 33.G.K.Mandal, M.M. Humane, R.K.Minj, D.Mandal, S.K.Das, A.K.Upadhayay, K.Mukherjee, D.P.Singh, R.B.V Ramana, S. Sahoo and T. Venugopalan: “Development of Synthetic Slag to Control the Inclusions in High Carbon Steel suitable for making Wires” Presented at 50th NMD and 66th ATM, The Indian Institute of metals, Jamshedpur, 15 to 19th Nov. Jamshedpur | 2012 |
| 2012 | 34.D.Mandal, K.L. Sahoo, S.Paswan and S.K.Das, “Effect of Impingement angle and particle velocity on Erosion Behavior of Different Grade Steels” Presented at 50th NMD and 66th ATM, The Indian Institute of Metals, Jamshedpur, 15 to 19th Nov. Jamshedpur | 2012 |
| 2012 | 35.M.M.Humane, D.Mandal, “Effect of Mechanical Processing and Heat Treatment on Microstructure Analysis of 7075 Aluminium alloys” Presented at 50th NMD and 66th ATM, The Indian Institute of metals, Jamshedpur, 15 to 19th Nov. Jamshedpur | 2012 |
| 2012 | 36.A.K.Datta, D.Mandal and K.L.Sahoo, “Optimization of Process Parameters by Reliability Based Uncertainty Modeling of Cold Rolling Process” Presented at 50th NMD and 66th ATM, The Indian Institute of metals, Jamshedpur, 15 to 19th Nov. Jamshedpur | 2012 |
| 2011 | 37.M.M.Humane, D.Mandal and R.K.Minj, “Effect of Thermo-Mechanical Processing on Texture Formation of High Formable Steel Sheets” Proceedings in National Conference on Thermomechanical Simulation using Gleeble system, JSW Steel Ltd 16-18 Sept , page-43, Published by JSW Steel Ltd. (Full Paper) Vijaynagar works, Toranagallu, Karnataka | 2011 |
| 2010 | 38.D. Mandal, “Interface analysis of Al-SiC composite” Presented in 48th NMD and 64th ATM, The Indian Institute of Metals, 14th to 16th Nov IISc-Bangalore | 2010 |
| 2008 | 39.D.Mandal, “Effect of wt% Reinforcement on Mechanical and Wear Properties of Al-2Mg base Short Copper Coated Steel Fiber Composites” The Indian Institute of Foundryman, Jamshedpur Chapter, 17th -18th, January. Jamshedpur | 2008 |
| 2007 | 40.D.Mandal et. al “Tailoring of Microstructure and Enhancement of Mechanical Properties of Cast Fe-Si-Mn-V Steel by Austempering” Presented at a conference on “Look east for ductile iron casting” organized by IIF, Kolkata Chapter & Eastern Region, 10th March. Kolkata | 2007 |
| 2007 | 41.G.K.Mandal, D.Mandal, S.K.Das, R.Balasubramaniam and S.P.Mehrotra, “Evaluation of Microstructure of Galvanized coatings formed in pure as well as commercial grade zinc baths” International conference on Metals and Alloys Past, present and Future (METALLO-2007), Dec 7th -10th Dec IIT, Kanpur | 2007 |
| 2006 | 42.S.K. Das, P.K. De, D. Mandal et. al. “Mathematical modelling of ductile erosion behaviour of impacted fly ash particles on steel components of a coal fired boiler” 44th NMD- 60th ATM, 14th to 16th Nov Jamshedpur | 2006 |
| 2006 | 43.D.Mandal et al. “Influence of Austempering Temperature on Microstructur and Mechanical Properties of Cast Fe-Si-Mn-V Steel” 44th NMD & 60th ATM, The Indian Institute of Metals, 14th to 16th Nov. Jamshedpur | 2006 |
| 2005 | 44.D.Mandal, "Mechanical and wear properties of Al base varying wt% of short steel fibre reinfored Composites". 43rd NMD & 59th ATM, The Indian Institute of Metals, 14th–16th Nov 2005. (CSA Publication: Transactions of the Indian Institute of Metals. Vol. 58 (5) IIT Madras,Chennai | 2005 |
| 2004 | 45.D.Mandal, B.K.Dutta. and S.C.Panigrahi, "Processing of Aluminium alloy base Short-Steel Fiber Reinforced Composites Using Vortex Method". The Indian Institute of Foundryman, Jamshedpur Chapter, Dec 9-10. Jamshedpur | 2004 |
| 2003 | 46.D.Mandal, S.Divakar and S.C.Panigrahi, “Processing and Charecterisation of Aluminium base Short Stainless Steel Fiber Reinforced Composites Prepared by Liquid Process Vortex Methods” 41st NMD & 57th ATM, The Indian Institute of Metals, Nov-14th –16th Kolkata | 2003 |
| 2002 | 47.D.Mandal, S.C.Panigrahi and B.K.Dutta. “Mechanical Properties of Cast Aluminium base Short-Steel fiber reinforced Composites Prepared by Vortex Method” International Conference of Advances in Materials and Materials processing, Feb 1-3, (Full Paper) IIT Kharagpur | 2002 |
| 2002 | 48.D.Mandal, A.Verma, B.K.Dutta. and S.C.Panigrahi, Vertical Centrifugal Casting of Al-2Mg Matrix Short Steel Fiber Reinforced Composites. 40th NMD & 56th ATM, The Indian Institute of Metals, Nov-14th –17th Vadodara, India | 2002 |
| 2001 | 49.D.Mandal, S.C.Panigrahi, B.K.Dutta, “Fabrication of Aluminium Short-Steel Fiber Reinforced Composites Using Vortex Method” 39th NMD & 55th ATM, The Indian Institute of Metals, Nov 18-21. Bhubaneswar | 2001 |
| 2000 | 50.D.Mandal, A.K.Chacrabarti and K.K.Ray, “Studies on Forging quality Micro alloyed Steels” International Symposium on Minerals and Metals challenges beyond 2000, The Indian Institute of Metals, Nov 14-17. Bhilai Steel Plant | 2000 |
| ID | Title |
|---|---|
D. Mandal, Metal Casting and Forming, Edited by Director, CSIR-NML, Chapter published in A Continuing Educational Course : Metallurgy for Engineers, Published by CSIR-NML, Jamshedpur, India, 2009. (Chapter-IV) |
1. D. Mandal, Metal Casting and Forming, Edited by Director, CSIR-NML, Chapter published in A Continuing Educational Course : Metallurgy for Engineers, Published by CSIR-NML, Jamshedpur, India, 2009. (Chapter-IV) |
D. Mandal, Near Net Shape
Casting Through Investment, Die and Centrifugal Casting, Edited by K.L.Sahoo,
G.K.Mandal, N.G.Goswami and Sukomal Ghosh, Chapter published in Training Program on Special Metal Casting and Forming Processes, Published by CSIR-NML Jamshedpur-831007, India, 2008 (Chapter I) |
2. D. Mandal, Near Net Shape
Casting Through Investment, Die and Centrifugal Casting, Edited by K.L.Sahoo,
G.K.Mandal, N.G.Goswami and Sukomal Ghosh, Chapter published in Training Program on Special Metal Casting and Forming Processes, Published by CSIR-NML Jamshedpur-831007, India, 2008 (Chapter I) |
| ID | Details | Patent Filed Year |
|---|---|---|
| 2022 | 1. Electrolytic process for preparing high purity tungsten oxide nanocrystalline powder from tungsten carbide-cobalt scrap 2023 M. Salot, K. Santhy, G. Awasthi, D. Mandal and S.K Chaudhury Granted | 2022 |
| 2013 | 2. An Improved Coke based Energy Efficient Non-Ferrous Melting Furnace 2022 K. K. Paul, D. Mandal, Palash Poddar, K.L Sahoo Granted | 2013 |
| 2012 | 3. A Process for Production of Ferrosilicon from Banded Hematite Jasper T. Venugopalan, R. Kumar, S. Mohanan, Raajesh Kumar Minj, D. Singh, Kapildeo Mehta, Durbadal Mandal, D. Paswan, Sanjay Prasad, Sanjay Agarwal Submitted | 2012 |
| 2006 | 4. EROSIM-3 : A stochastic model based simultaneous code for Errosion OX isolation analysis of boiler grade steel. Suchandan Das, K.M.Godiwala, S.S.Hegde, S.P.Mehrotra, P.K.De, D.Mandal, Submitted | 2006 |
1. D. Mandal, Received “BOYSCAST FELLOWSHIP 2008-2009”
2. D. Mandal, Received Prof. Shilowbhadra Banerjee Award for the Best in House Project (NML Foundation Day award, November 26, 2011)
3. D.Mandal received 2nd best prize in poster presentation in International Conference on Metals and Alloys Past, present and Future (METALLO-2007), IIT, Kanpur, Dec 7th -10th Dec 2007
4. D. Mandal, (Pl) Received Prof. Shilowbhadra Banerjee Award for the Best in House Project (NML Foundation Day award, November 26, 2016)
1. Warden Hall IX (S.N Bose Hall of Residence) from March 2016 to 4th Oct 2018
2. A member of the Annual Report committee from April 2015 to March 2019
3. Member of CPDA committee, 2018
4. A departmental representative for Training and Placement from Jan 2015 to Dec 2018
Mobile : +91-9434788092
Email : dmandal.mme@nitdgp.ac.in
Seminars/Short Term Courses /Summer Schools/ Winter Schools organized:
|
Sl. No. |
From |
To |
Name of the course |
Sponsored/Self financed |
Number of Participants |
|
1 |
16th April 2008 |
18th April 2008 |
National Seminar on “Agglomeration and characterization of iron bearing raw materials (ACIM – 08)” at CSIR-NML, Jamshedpur |
Sponsored by CSIR-NML |
136 |
|
2 |
25th Feb 2008 |
26th Feb 2008 |
Training Program on ‘Special Metal Casting and Forming Processes (CAFP - 2008)’ at CSIR-nml, Jamshedpur, India |
Sponsored by CSIR-NML |
53 |
|
3 |
16th Dec 2013 |
18th Dec 2013 |
International Conference on “Science and Technology of Ironmakingand Steelmaking (STIS 2013)” At CSIR-NML Jamshedpur, India |
Sponsored by CSIR-NML |
126 |
|
4 |
18th March 2014 |
19th March 2014 |
Demonstration/training program on ‘Energy efficient brass melting furnace’ At Technical Training Institute, Balasore, Odisha |
Sponsored by CSIR, New Delhi |
41 |
|
5 |
06th to Feb 2017 |
10th Feb 2017 |
Short Term course on Mechanical Behaviour and Modelling of Materials, at NIT Durgapur (Co-ordinator) |
CoE and TEQIP-II, NIT Durgapur |
48 |
|
6 |
27th Feb 2017 |
03rd March 2017 |
Short Term course on Processing Characterization and Application of Advanced Materials, at NIT Durgapur (Treasurer) |
CoE and TEQIP-II, NIT Durgapur |
29 |
| Orcid Id |
| Scopus Id |
| Researcher Id |
| Google Scholar Id |
ERP
