2. Design issues in high strain rate dynamic compressive failure of structural ceramics, polymers and composites.
Saikat Acharya, K.S. Ghosh, D.K. Mondal, A.K. Mukhopadhyay, Microscopy Applied to Materials Sciences and Life Sciences, Chapter 9, 207, Applied Academic Press, CRC, Francis and Taylor, 2017.
3. The Journey of the Department of Metallurgical and Materials Engineering, NIT Durgapur, Towards Achieving Academic Excellence
M.M. Ghosh*, Satadipa Banerjee, Hrishikesh Kumar and K.S. Ghosh, Indian Metallurgy, pp 389-299, November, 2023.
Work Experiences
Teaching 31 years
Industrial 02 years
Research Interest
Corrosion Engineering; Characterisation of Alloys, Composites and Biomaterials; Welding Technology
Projects
Title
Investigator
Co-investigator
Sponsered Agency
Duration
Status
1. Studies of Mechanical Properties and Corrosion Behaviour of HSLA Steels, sponsored by NRB, DRDO, New Delhi. Completed 2013
2. Development of Cast High Strength Microalloyed Steel, sponsored by CSIR, New Delhi Completed 2015
3. IN-VITRO and IN-VIVO Study of Electrochemical Behaviour of Dental Amalgams of Various States in Oral Environments: Completed 2017
4. Design and Development of a Promising Ternary γ-Titanium Aluminide Alloy Containing Niobium for Aerospace Applications
1. Effect of Heat Treatment and
NC Ni Coating on Electrochemical and Hydrogen Embrittlement Behaviour of a High Strength Low Alloy (HSLA)
Steel P. Siva Prasad and K. S. Ghosh Electrocatalysis.
13 (5) 551-566
SCI
https://Doi.Org/10.1007/S12678-022-00744-4
Springer
2022
2022
2. A Multiscale Model based Scheme for the Design and Development of
Nanocomposites for Advanced
Structural Applications Krishnan Bandyopadhyay, S. Das, Ajay Mishra, K.S. Ghosh, and M.M. Ghosh Journal
of Materials Engineering and
Performance
xxxx
SCI
Springer
2022
2022
3. Molecular Dynamics based Scheme of Designing Nanostructured Cu-Ni Alloy
Thin Film for Coating on Advanced
Structural Components in Naval Vessels Krishnan Bandyopadhyay, K. S. Ghosh and M. M. Ghosh Journal
of Materials Engineering and Performance
xxxxx
SCI
xxxx
Springer
2022
2021
4. Precipitation Strengthening and Corrosion Behaviour of a 6061
AlMg-Si-Cu Alloy , K.S. Ghosh Journal of Mineral, Metal and Material Engineering
7, 29-38
Others
DOI: https://doi.org/10.31437/2414-2115.2021.07.4.
Scientific Array
2021
2021
5. Cyclic annealing versus continuous annealing of 20 wt.% chromium white cast iron Siddhartha Sankar Mandal, Dipak Kumar Mondal, and K. S. Ghosh
Metallurgical Research Technology
118, 404
SCI
https://doi.org/10.1051/metal/2021044
Elsevier
2021
2020
6. Electrochemical and hydrogen embrittlement of a micro-alloy steel coated with nanocrystalline nickel by pulse electrodepositio
Philosophical Magazine Letters, 2020, 100 (4), 162–170. Link https://www.tandfonline.com/doi/full/10.1080/09500839.2020.1736356 P. Kar, P. Siva Prasad, M. M. Ghosh and K. S. Ghosh Philosophical Magazine Letters
100 (4), 162–170
SCI
doi.org/10.1080/09500839.2020.1736356
Taylor and Francis
2020
2019
7. Effect of high strain rate deformation on the properties of SS304L and SS316LN alloy
Mechanics of Materials, 2019, 136(9), 103073. Link https://www.sciencedirect.com/science/article/abs/pii/S0167663619301917
Saikat Acharya, A. K.Mukhopadhyay, ...D . Mondal, K S Ghosh Mechanics of Materials
136(9), 103073
SCI
doi.org/10.1016/j.mechmat.2019.103073
Elsevier
2019
2019
8. Colrimetric studies of 2024 Al-Cu-Mg and 2014 Al-Cu-Mg-Si alloys of various tempers,
Journal of Thermal Analysis and Calorimetry, (2019) 136 (2):447–459: Link https://link.springer.com/article/10.1007/s10973-018-7702-0.).,- K S Ghosh Journal of Thermal Analysis and Calorimetry
136 (2):447–459
SCI
https://link.springer.com/article/10.1007/s10973-018-7702-0
Springer
2019
2019
9. Microstructural modification and aging behaviour of Al-17Si-5Cu alloy using a novel approach,
Materials Science and Technology, 2019, Vol.. 35, No. 13, 1632–1641. Link https://www.tandfonline.com/doi/full/10.1080/02670836.2019.1636178 Biplab Hazra, K. S. Ghosh, Rajdeep Sarkar, Supriya Bera and Bijay Kumar Show Materials Science and Technology
Vol.. 35, No. 13, 1632–1641
SCI
doi/full/10.1080/02670836.2019.1636178
Maney Publication
2019
2018
10. Microstructural characterization and electrochemical behaviour of AA2014 Al-Cu-Mg-Si alloy of various tempers
J of Materials Engineering and Performance, (2018), 27:5926–5937. Link https://link.springer.com/article/10.1007/s11665-018-3694-y K. S. Ghosh and Kapil Tripathi J of Materials Engineering and Performance
27:5926–5937
SCI
10.1007/s11665-018-3694-y
Springer
2018
2018
11. Electrochemical behaviour of dental amalgam in natural, artificial saliva and in 0.90 wt.% NaCl solution
Corrosion Science, 133 (2018), 217-230. Link https://www.sciencedirect.com/science/article/abs/pii/S0010938X16314305 Nivedita Dutta Chowdhury and K.S. Ghosh Corrosion Science
133, 217-230.
SCI
abs/pii/S0010938X16314305
Elsevier
2018
2018
12. Molecular Dynamics Based Modelling of Tensile Deformation and Nanoindentation of Tungsten Nanoparticles for Estimating Useful Mechanical Properties
Materials Today Proceedings, 5 (2018) 20699–20703. Krishnan Bandyopadhyay, K. S. Ghosh and M. M. Ghosh Materials Today Proceedings
5 (2018) 20699–20703
Others
10.2018/xxx
Others
2018
2018
13. Microstructure, Hardness, Toughness and Abrasive Wear Resistance of 16.0 wt. % Chromium White Iron after Continuous and Cyclic Annealing Treatment
International Journal of Cast Metals Research, 2018, vol. 31, No. 3, 177–192. Link https://www.tandfonline.com/doi/full/10.1080/13640461.2017.1408182 Siddhartha Sankar Mandal, K. S. Ghosh and Dipak Kumar Mondal International Journal of Cast Metals Research
Vol. 31 (3), 177–192
SCI
10.1080/13640461.2017.1408182
Taylor and Francis
2018
2018
14. Effect of Destabilisation Period and Post Destabilisation Cooling Rate on the Evolution of Microstructure in 8.0 wt% Chromium White Cast Iron , (2018), 71(8), 2067. https://link.springer.com/article/10.1007/s12666-018-1341-9 Siddhartha Sankar Mandal, K. S Ghosh, Dipak Kumar Mondal Transactions, Indian Institute of Metals
71 (8), 2067–2081
SCI
doi.org/10.1007/s12666-018-1341-9
Springer
2018
2018
15. Microstructural characterization and electrochemical behaviour of AA2014 Al-Cu-Mg-Si alloy of various tempers,
K. S. Ghosh and Kapil Tripathi, J of Materials and Performance: Link (2018), 27:5926–5937 K. S. Ghosh and Kapil Tripathi J of Materials and Performance
27:5926–5937
SCI
https://link.springer.com/article/10.1007/s11665-018-3694-y
Springer
2018
2017
16. Correlation between microstructure, hardness, wear and electrochemical behaviour in 8.0%, 6.0% and 20.0% (by wt) chromium white irons
Materials Chemistry and Physics, 193 (2017) 401-412. Link https://www.sciencedirect.com/science/article/abs/pii/S0254058417301827 Siddhartha Sankar Mandal, K.S. Ghosh, Dipak Kumar Mondal Materials Chemistry and Physics
193, 401-412
SCI
abs/pii/S0254058417301827
Elsevier
2017
2017
17. Microstructure, Mechanical and Abrasive Wear Behavior of 8.0 wt pct Cr White Iron Subjectedto Continuous and Cyclic Annealing Treatment
Metallurgical and and Materials Transactions A, Vol 48A (7) (2017) 3432-3444. Link https://link.springer.com/article/10.1007/s11661-017-4101-2 Siddhartah Sankar Mandal, K.S. Ghosh and Dipak Kumar Mondal Metallurgical and and Materials Transactions A
Vol. 48A (7), 3432-3444
SCI
10.1007/s11661-017-4101-2
Springer
2017
2017
18. Non-equilibrium MD modeling and simulation to extract mechanical properties of copper nanoparticles under ultra-high strain rate loading
Computational Materials Science, 127 (2017) 277-283. Link https://www.sciencedirect.com/science/article/abs/pii/S0927025616305638 Krishnan Bandyopadhyay, Jit Sarkar, K.S. Ghosh, M.M. Ghosh Computational Materials Science
127, Feb. 277-283
SCI
article/abs/pii/S0927025616305638
doi.org/10.1016/j.commatsci.2016.11.013.
2017
2017
19. High Strain Rate Dynamic Compressive Behaviour of Al6061-T6 alloys
Materials Characterization, 127 (2017),185–197. Link https://www.sciencedirect.com/science/article/abs/pii/S104458031631419X Saikat Acharya, Jiten Ghosh, DK Mondal, KS Ghosh, AK Mukhopadhyay, Materials Characterization
127,185–197
SCI
doi.org/10.1016/j.matchar.2017.03.005
Elsevier
2017
2017
20. Mechanical behaviour of glass fibre reinforced composite at varying strain rates
Materials Research Express, 4 (2017) 035303. Link https://iopscience.iop.org/article/10.1088/2053-1591/aa63dc Saikat Acharya, D K Mondal, K S Ghosh and Anoop Mukhopadhyay Materials Research Express
4, 035303.
SCI
article/10.1088/2053-1591/aa63dc
IOP Science
2017
2017
21. Characterization of Ag-Sn-Cu Dental Amalgam Powder and its Amalgam Triturated with Nominal and Higher Pressure,
Transactions Indian Institute of Metals, 2017, 70(9), 2221–2231. DOI 10.1007/s12666-017-1053-6. Nivedita Dutta Chowdhury and K S Ghosh Transactions Indian Institute of Metals
70(9), 2221–2231.
SCI
DOI 10.1007/s12666-017-1053-6.
Springer
2017
2017
22. Characterization of Ag-Sn-Cu Dental Amalgam Powder and its Amalgam Triturated with Nominal and Higher Pressure,
Transactions Indian Institute of Metals, 2017, 70(9), 2221–2231. Link https://link.springer.com/article/10.1007/s12666-017-1053-6 Nivedita Dutta Chowdhury and K S Ghosh Transactions Indian Institute of Metals
70(9), 2221–2231
SCI
DOI 10.1007/s12666-017-1053-6.
Springer
2017
2017
23. Calorimetric studies of Ag-Sn-Cu dental amalgam powders and their amalgams
Journal of Thermal and Analysis of Calorimiomery. 2017, 130:623–637. Link https://link.springer.com/article/10.1007/s10973-017-6438-6 Nivedita Dutta Chowdhury and K S Ghosh Journal of Thermal and Analysis of Calorimiomery
130, 623–637
SCI
DOI: 10.1007/s10973-017-6438-6.
Springer
2017
2016
24. Deformation, decomposition and hardening behavior of nano Al7075 alloy prepared by mechanical milling and hot pressing
Advanced Powder Technology, 2016, 27 (4), 1874–1877. Link https://www.sciencedirect.com/science/article/abs/pii/S0921883116300930 Tuhin Das, R. Karunanithi, Arijit Sinha, K.S. Ghosh, Supriya Bera Advanced Powder Technology
27, 1874–1877
SCI
/pii/S0921883116300930
Elsevier
2016
2015
25. Microstructural mechanical and electrochemical behaviour of a 7017 Al-Zn-Mg alloy of different tempers
Materials Characterization, Vol. 104, (2015), 49-60. Link https://www.sciencedirect.com/science/article/abs/pii/S1044580315000844 Prasanta Kumar Rout, M. M. Ghosh and K S Ghosh Materials Characterization
Vol. 104, 49-60
SCI
pii/S1044580315000844
Elsevier
2015
2015
26. Influence of Aging Treatments on Alterations of Microstructural Features and Stress Corrosion Cracking Behaviour of an Al-Zn-Mg Allo Prasanta
J. of Materials Engineering and Performance, 24 (2015) 2792-2805. Link https://link.springer.com/article/10.1007/s11665-015-1559-1 Kumar Rout, M. M. Ghosh and K S Ghosh, Journal of Materials Engineering and Performance
24, 2792-2805
SCI
DOI: 10.1007/s11665-015-1559.
Springer
2015
2015
27. Nickel coating on hogh strength low alloy steel by pulse current deposition
IOP Conf. Series : Materials Science and Enginnering, Vol. 75, 2015, 1-10. Link https://iopscience.iop.org/article/10.1088/1757-899X/75/1/012024/meta S Nigam and K S Ghosh Materials Science and Engineering
Vol. 75, 1-10
SCI
10.1088/ 177-899X/75/1012014
Elsevier
2015
2014
28. Electrochemical behaviour of TiO2 reinforced Al 7075 alloy composites
Materials Science and Engineering B, 19(12), 2014, 133-143. Link https://www.sciencedirect.com/science/article/abs/pii/S0921510714001573 R. Karunanithi, Supriya Bera and K.S. Ghosh Materials Science and Engineering B
Vol. 190 (12), 133-143
SCI
pii/S0921510714001573
Elsevier
2014
2014
29. Effect of interrupted ageing on stress corrosion cracking (SCC) behaviour of an Al-Zn-Mg-Cu alloy
Procedia in Materials Science, 5 (2014), 1214-1223. Link https://www.sciencedirect.com/science/article/pii/S2211812814007925 Prasanta Kumar Rout, M. M. Ghosh and K. S. Ghosh Procedia in Materials Science
5, 1214-1223
SCI
pii/S2211812814007925
Elsevier
2014
2014
30. Influence of particle size of the dispersoid on compressibility and sinterability of TiO2dispersed Al 7075 alloy composites prepared by mechanical milling
Advanced Powder Technology, Vol 25, 5 (2014) 1500-1509. Link https://www.sciencedirect.com/science/article/abs/pii/S0921883114001174 R. Karunanithi, K.S. Ghosh, and Supriya Bera Advanced Powder Technology
Vol. 25 (5 ), 1500-1509
SCI
pii/S0921883114001174
Elsevier
2014
2014
31. Improvement of stress corrosion cracking (SCC) resistance of a 7150 Al-Zn-Mg-Cu alloy by retrogression and reageing (RRA) treatment, Prasanta Kumar Rout, M.M. Ghosh K.S. Ghosh, Vols. 984-985 (2014), 529-535 Advance Materials Research
SCI/SCOPUS
2014
2014
32. Effect of solution pH on electrochemical and stress corrosion-Mg-Cu alloy on Stress corrosion cracking behaviour of a 7150 Al-Zn-Mg-Cu alloy Materials Science and Engineering A, 604 (2014) 156-165. Link https://www.sciencedirect.com/science/article/abs/pii/S0921509314001798 Prasanta Kumar Rout, M. M. Ghosh and K.S. Ghosh, Materials Science and Engineering A
604, 156-165.
SCI
pii/S0921509314001798
Elsevier
2014
2014
33. Synthesis and characterization of TiO2 dispersed Al 7075 micro- and nanocomposite, R. Karunanithi, K.S. Ghosh, and Supriya Bera, 2014, Vols. 984-985 (2014), 313-318 Advance Materials Research
SCI/SCOPUS
2014
2014
34. Effect of dispersoid size and volume fraction on aging behavior and mechanical properties of TiO2 dispersed Al 7075 alloy composites,
Metallurgical and Materials Transactions A, Vol 45A (9), (2014) 4062-4072. Link https://link.springer.com/article/10.1007/s11661-014-2337-7 R. Karunanithi, K.S. Ghosh, and Supriya Bera Metallurgical and Materials Transactions A
Vol 45A, 4062-4072
SCI
10.1007/s11661-014-2337-7
Springer
2014
2013
35. Effect of grain size on mechanical electrochemical and hydrogen embrittlement behavior of a micro-alloy steel
Material Science and Engineering A, 2013, 559, 693-705. Link https://www.sciencedirect.com/science/article/abs/pii/S0921509312013238 K. S. Ghosh and D.K. Mondal Material Science and Engineering A
559, 693-705
SCI
/S0921509312013238
Elsevier
2013
2013
36. Study of Aging and Elecrchemical Behavior of Al-Li-Cu-Mg Alloy
Materials and Corrosion, 64 (10), 2013, 890-901. Link https://onlinelibrary.wiley.com/doi/10.1002/maco.201106409 K S Ghosh, S Mukhopadhyay, B Konar and Bibhudutta Mishra Materials and Corrosion
64 (10), 890-901.
SCI
/10.1002/maco.201106409
Wiley
2013
2013
37. Mechanical and Eelectrochemical Behavior of a High Strength Alloy Steel of Different Grain Sizes
Metallurgical and Material Transactions A, 2013, Vol. 44 (8), 3608-3622. Link https://link.springer.com/article/10.1007/s11661-013-1745-4 K. S. Ghosh and D.K. Mondal Metallurgical and Material Transactions A
Vol. 44 (8), 3608-3622
SCI
10.1007/s11661-013-1745-4
Springer
2013
2012
38. Aging and Electrochemical Behaviour of a 7017 Al-Zn-Mg Allo, Prashant Kumar Rout and K S Ghosh,, Vol. 710, 2012, pp 665-670. Materials Science Forum
SCI/SCOPUS
2012
2012
39. Characterisation of High Pressure Torsion Processed 7150 Al-Zn-Mg-Cu Alloy
Materials Science and Engineering A, 552, 2012, 164-171. Link https://www.sciencedirect.com/science/article/abs/pii/S0921509312007186 K S Ghosh, N Gao and M J Starink Materials Science and Engineering A
552 A, 164-171
SCI
pii/S0921509312007186
Elsevier
2012
2011
40. Determination of Kinetics Parameters from Calorimetric Study of Solid State Reactions in 7150 Al-Zn-Mg Alloy
Transc Non-Ferrous Metal Society China, 21 (2011)6, 1199-1209. Link https://www.sciencedirect.com/science/article/abs/pii/S1003632611608431 K. S. Ghosh and N. Gao Transactions Non-Ferrous Metal Society of China
Vol. 21, (6), 1199-1209.
SCI
/S1003632611608431
Elsevier
2011
2008
41. Calorimetric Studies and Kinetic Parameters of Solid State Reactions in 7017 Al-Zn-Mg Alloy
Transactions Indian Instutute of Metals, 61 (2008) 6, pp. 487-496. Link https://link.springer.com/article/10.1007/s12666-008-0056-8 K. S. Ghosh, A. K. Kumar and M. K. Mohan Transactions Indian Institute of Metals
61 (6), 487-496.
SCI
10.1007/s12666-008-0056-8
Springer
2008
2007
42. Calorimetric Studies of 8090 and 1441 Al-Li-Cu-Mg-Zr alloys in conventional and retrogressed and reaged (RRA) tempers
Journal of Materials Science, 42 (2007) 6, 4276 – 4290. Link https://link.springer.com/article/10.1007/s10853-006-0619-1 K. S. Ghosh, K. Das and U. K. Chatterjee Journal of Materials Science
42 (6), 4276 – 4290
SCI
10.1007/s10853-006-0619-1
Elsevier
2007
2007
43. Environmental Induced Cracking in Al-Li-Cu-Mg-Zr Alloys of Peak Aged and Retrogressed and Reaged Tempers under Applied Potentials, K. S. Ghosh, K. Das and U. K. Chatterjee, 2007, pp 11-20 TMS 2007 of “Degradation of Light Weight Alloys"
SCI/SCOPUS
2007
2007
44. Kinetics of Solid State Reactions in Al-Li-Cu-Mg-Zr Alloys from Calorimetric Studies
Metallurgical and Materials Transactions A, 38A (2007) 9, 1965 – 1975. Link https://link.springer.com/article/10.1007/s11661-007-9250-2 K. S. Ghosh, K. Das and U. K. Chatterjee Metallurgical & Materials Transactions A,
38A (9), 1965 – 1975
SCI
10.1007/s11661-007-9250-2
Springer
2007
2007
45. Correlation of Stress Corrosion Cracking Behaviour with Electrical Conductivity and Open Circuit Potential in Al-Li-Cu-Mg-Zr Alloys
Materials and Corrosion (Werkstoffe und Korrosion), 58 (2007) 3, 181-188. Link https://onlinelibrary.wiley.com/doi/10.1002/maco.200603987 K. S. Ghosh, K. Das and U. K. Chatterjee Materials and Corrosion
58 (3), 181-188.
SCI
/10.1002/maco.200603987
Wiley
2007
2006
46. Electrochemical Behaviour of Retrogression and Reaged (RRA) 8090 and 1441 Al-Li-Cu-Mg-Zr Alloys
Journal of Applied Electrochemistry, 36 (2006) 9, pp. 1057- 1068. Link https://rd.springer.com/article/10.1007/s10800-006-9166-3 K. S. Ghosh, K. Das and U. K. Chatterjee Journal of Applied Electrochemistry
36 (9), 1057- 1068
SCI
10.1007/s10800-006-9166-3
Elsevier
2006
2005
47. Studies of Retrogression and Reaging (RRA) Behaviour in a 1441 Al-Li-Cu-Mg-Zr Alloy
Metallurgical and Materials Transactions A, 36A (2005) 12, pp 3477-3487. Link https://link.springer.com/article/10.1007/s11661-005-0021-7 K. S. Ghosh, K. Das and U. K. Chatterjee Metallurgical and Materials Transactions A
36A (12), 3477-3487
SCI
10.1007/s11661-005-0021-7
Springer
2005
2004
48. Characterization of Retrogression and Reaging (RRA) Behaviour of 8090 Al-Li-Cu-Mg-Zr Alloy
Metallurgical and Materials Transactions A, 35A (2004) 12, 3681-3691. Link https://link.springer.com/article/10.1007/s11661-004-0274-6 K. S. Ghosh, K. Das and U. K. Chatterjee Metallurgical and Materials Transactions A
35A (12), 3681-3691.
SCI
10.1007/s11661-004-0274-6
Springer
2004
2004
49. Studies of Microstructural Changes upon Retrogression and Reaging (RRA) Treatment to 8090 Al-Li-Cu-Mg-Zr Alloy
Materials. Science and Technology, 20 (2004) 7, pp. 825-834. Link https://www.tandfonline.com/doi/abs/10.1179/026708304225019650 K. S. Ghosh, K. Das and U. K. Chatterjee Materials. Science and Technology
20 (7), 825-834.
SCI
10.1179/026708304225019650
Taylor and Francis
2004
2003
50. Stress Corrosion Cracking (SCC) Behaviour of Retrogressed and Reaged 1441 Al-Li-Cu-Mg-Zr Alloy, K. S. Ghosh, K. Das and U. K. Chatterjee, Paper No. C014, 2003 Journal of Corrosion Science and Engg.
SCI/SCOPUS
2003
2000
51. Creep Rupture of Nimonic-90 under Salt Induced High Temperature Corrosion
Indian Journal of Engineering and Material Science, 7, April, (2000), 69-76. Link http://nopr.niscair.res.in/handle/123456789/24385 K. S. Ghosh Indian Journal of Engineering and Material Science
7, April , 69-76
SCI
/123456789/24385
NISCAIR
2000
1998
52. Effect of Salt Induced High Temperature Corrosion on Creep-Rupture Properties of AISI 316 Stainless Steel
Transactions Indian Institute of Technology, 51 (1998), 183-186. K. S. Ghosh Transactions Indian Institute of Technology
51, 183-186
SCI
Springer
1998
1995
53. Fusion Point Diagram of Na2SO4-NaVO3-NaCl System, K. S. Ghosh and S. Raghavan, 48 (1995) 5, pp 401-408. Transaction IIM
SCI/SCOPUS
1995
Conferences
ID
Details
Year
1997-2018
1.Conference paper and prsentation 40
India and abroad
1997-2018
Books
ID
Title
2. "Foundations of Corrosion Science and Engineering" published by PHI Learning, New Delhi in August, 2024.
1.
2. "Foundations of Corrosion Science and Engineering" published by PHI Learning, New Delhi in August, 2024.
Book on "Foundation of Welding Technology", by PHI Learning, New Delhi, in September, 2022.
ERP