Nanomaterials - Nanoparticles, Nanostructures, Nanocomposites and Nanofluids
Plastic Deformation and Strengthening of Materials
Mechanical Processing of Materials
Advanced Materials for Biomedical, Nuclear, Aerospace, Aeronautical, Naval, and Defence Applications
Heat Treatment of Metallic Materials
Physical Metallurgy
Mechanical Metallurgy
Projects
Title
Investigator
Co-investigator
Sponsered Agency
Duration
Status
"MD-Stochastic Model Based Design and Development of Nanofluids for Advanced Thermal Applications"
Sanction order no.: SR/FTP/ETA-118/2011, dtd. 11.12.2012
MM Ghosh (PI)
NA
DST, Government of India
3 years (Feb 05, 2013 - Feb 04, 2016)
Completed
Teachings
1) Fundamentals of Plastic Deformation and Strengtening of Materials (MMC503)
2) Mechanical Working of Materials (MMC602)
3) Electronic and Thermal Properties of Materials (MME611)
4) Computational Materials Engineering (MME712)
5) FEM Modelling and Simulation for Materials Design (MME815)
6) Materials Modelling and Simulation (MT9015)
UG / PG Students
Data Not Found!
Doctoral Students
Hrishikesh Kumar
Research Scholar (Ongoing)
Design and Development of Nanostructured Cu-Ni Alloy Thin Film Coated Structural Materials for Naval Applications
Hrishikesh Kumar
Research Scholar (Ongoing)
Design and Development of Nanostructured Cu-Ni Alloy Thin Film Coated Structural Materials for Naval Applications
KRISHNAN BANDYOPADHYAY
Research Scholar (Ongoing)
Multiscale Model based Studies of Physical and Mechanical Properties of Nanostructures and Nanocomposites
KRISHNAN BANDYOPADHYAY
Research Scholar (Ongoing)
Multiscale Model based Studies of Physical and Mechanical Properties of Nanostructures and Nanocomposites
SUJOY DAS
Research Scholar (Ongoing)
Synthesis, Characterization and Thermal Conductivity Modelling of Nanofluids for Advanced Heat Transfer Applications
SUJOY DAS
Research Scholar (Ongoing)
Synthesis, Characterization and Thermal Conductivity Modelling of Nanofluids for Advanced Heat Transfer Applications
Palas Kar
Research Scholar (Ongoing)
Synthesis and Characterization of Pulse Electrodeposited Ni, Ni-Mo and Ni-Mo Composites
Palas Kar
Research Scholar (Ongoing)
Synthesis and Characterization of Pulse Electrodeposited Ni, Ni-Mo and Ni-Mo Composites
Ajay Kumar Mishra
Research Scholar (Ongoing)
Multiscale Model based Design and Development of Carbon Fibre Reinforced Epoxy Resin Composites for Advanced Structural Applications
Ajay Kumar Mishra
Research Scholar (Ongoing)
Multiscale Model based Design and Development of Carbon Fibre Reinforced Epoxy Resin Composites for Advanced Structural Applications
Prasanta Kumar Rout
Ph.D. (Completed)
Characterization of Al-Zn-Mg-(Cu) Alloys of Various Tempers and Their Effects on Stress Corrosion Cracking Behaviour
Prasanta Kumar Rout
Ph.D. (Completed)
Characterization of Al-Zn-Mg-(Cu) Alloys of Various Tempers and Their Effects on Stress Corrosion Cracking Behaviour
Arijit Banerjee
Research Scholar (Ongoing)
Deformation Behaviour of Steel Strip in Rolling : Experiments and Modelling
Arijit Banerjee
Research Scholar (Ongoing)
Deformation Behaviour of Steel Strip in Rolling : Experiments and Modelling
Satadipa Banerjee
Research Scholar (Ongoing)
Design and Development of Zr-based Alloy with Enhanced Radiation Tolerance Properties for Nuclear Reactors
Satadipa Banerjee
Research Scholar (Ongoing)
Design and Development of Zr-based Alloy with Enhanced Radiation Tolerance Properties for Nuclear Reactors
Pritam Sadhukhan
Research Scholar (Ongoing)
Designing
Ti-based Alloy by Multiscale Modelling to Manufacture
through 3D Printing Technique
for Applications as Orthopaedic Implants
Pritam Sadhukhan
Research Scholar (Ongoing)
Designing
Ti-based Alloy by Multiscale Modelling to Manufacture
through 3D Printing Technique
for Applications as Orthopaedic Implants
Projects
Sl.No.
Title
Name of the PI
Name of the CoPIs
Funding Agency
Amount (Rs.)
Project Type
Project Status
Date of Initiation
Date of Completion
1
"MD-Stochastic Model Based Design and Development of Nanofluids for Advanced Thermal Applications" Sanction order no.: SR/FTP/ETA-118/2011, dtd. 11.12.2012
Madan Mohan Ghosh
DST, Government of India
Sponsored
Completed
Feb 05, 2013
Feb 04, 2016
Projects
Sl.No.
Title
Name of the PI
Name of the CoPIs
Funding Agency
Amount (Rs.)
Project Type
Project Status
Date of Initiation
Date of Completion
1
"MD-Stochastic Model Based Design and Development of Nanofluids for Advanced Thermal Applications" Sanction order no.: SR/FTP/ETA-118/2011, dtd. 11.12.2012
1. Molecular dynamics and Brownian dynamics-based studies on interfacial heat conduction from a heat source to a nanofluid for estimating the enhancement in thermal conductivity of the nanofluid M.M. Ghosh and Sujoy Das Applied Physics A
Vol. 126, pp. 694-1-13
SCI
10.1007/s00339-020-03888-6
Springer
2020
2020
2. Electrochemical and hydrogen embrittlement of a micro-alloy steel coated with nanocrystalline nickel by pulse electrodeposition P. Kar, P. Siva Prasad, M.M. Ghosh and K.S. Ghosh Philosophical Magazine Letters
Vol. 100, No. 4, pp. 162–170
SCI
10.1080/09500839.2020.1736356
Taylor & Francis
2020
2019
3. An experimental investigation on thermal conductivity and stability of aqueous and nonaqueous nanofluids containing Ag-Cu alloy nanoparticles Sujoy Das and M.M. Ghosh Materials Research Express
Vol. 6, No. 11, pp. 115027-1-14
SCI
10.1088/2053-1591/ab4457
IOP Publishing
2019
2018
4. Molecular Dynamics Based Modelling of Tensile Deformation and Nanoindentation of Tungsten Nanoparticles for Estimating Useful Mechanical Properties Krishnan Bandyopadhyay, K.S. Ghosh and M.M. Ghosh Materials Today: Proceedings
Vol. 5, No. 9, pp. 20699–20703
SCOPUS
10.1016/j.matpr.2018.06.453
Elsevier
2018
2018
5. A Study on Thermal Conductivity and Stability of Nanofluids Containing Chemically Synthesized Nanoparticles for Advanced Thermal Applications Sujoy Das, Krishnan Bandyopadhyay and M.M. Ghosh Journal of Materials Engineering and Performance
Vol. 27, No. 8, pp. 3994-4004
SCI
10.1007/s11665-018-3506-4
Springer
2018
2018
6. Effect of Irradiation on the Tensile Properties of Nano-sized Ti-Al Alloy Single Crystals: A Study Using Molecular Dynamics Simulations Agniswami Behera and M.M. Ghosh Materials Today: Proceedings
Vol. 5, No. 9, pp. 20647–20651
SCOPUS
10.1016/j.matpr.2018.06.447
Elsevier
2018
2017
7. Study on Precipitation Hardening of C 250 Grade Maraging Steel Gaurav Kumar Singh and M.M. Ghosh Transactions of the Indian Institute of Metals
Vol. 70, No. 8, pp. 2111–2122
SCI
10.1007/s12666-016-1034-1
Springer
2017
2017
8. Non-equilibrium MD modeling and simulation to extract mechanical properties of copper nanoparticles under ultra-high strain rate loading Krishnan Bandyopadhyay, Jit Sarkar, K.S. Ghosh, and M.M. Ghosh Computational Materials Science
Vol. 127, pp. 277-283
SCI
10.1016/j.commatsci.2016.11.013
Elsevier
2017
2017
9. On Mechanical Properties of Graphene Sheet Estimated Using Molecular Dynamics Simulations D.K. Das and M.M. Ghosh Journal of Materials Engineering and Performance
Vol. 26, No. 9, pp. 4522-4532
SCI
10.1007/s11665-017-2909-y
Springer
2017
2016
10. A Parametric Study on the Thermal Conductivity of Nanoparticles Using Molecular Dynamics Simulations Anirban Das and M.M. Ghosh Advanced Science, Engineering and Medicine
Vol. 8, No. 8, pp. 646-652
Others
10.1166/asem.2016.1900
American Scientific Publishers
2016
2015
11. Microstructural, mechanical and electrochemical behaviour of a 7017 Al-Zn-Mg alloy of different tempers Prasanta Kumar Rout, M.M. Ghosh, and K. S. Ghosh Materials Characterization
Vol. 104, pp. 49-60
SCI
10.1016/j.matchar.2015.03.025
Elsevier
2015
2015
12. Study on Fatigue Response of Nanoparticles under Ultra-High Frequency Cyclic Loading using MD Simulations Jeetendra Kumar Singh and M.M. Ghosh Journal of Materials Engineering and Performance
Vol. 24, No. 5, pp. 1809-1819
SCI
10.1007/s11665-015-1479-0
Springer
2015
2015
13. Estimation of Thermal Conductivity of Nanofluids Using MD-Stochastic Simulation Based Approach Sujoy Das and M.M. Ghosh International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering
Vol. 9, No. 1, pp. 75-80
Others
10.5281/zenodo.1338058
World Academy of Science, Engineering and Technology
2015
2015
14. MD Simulation-based Study on the Melting and Thermal Expansion Behaviors of Nanoparticles Under Heat Load A. Das and M.M. Ghosh Computational Materials Science
Vol. 101, pp. 88-95
SCI
10.1016/j.commatsci.2015.01.008
Elsevier
2015
2015
15. Influence of Aging Treatments on Alterations of Microstructural Features and Stress Corrosion Cracking Behavior of an Al-Zn-Mg Alloy Prasanta Kumar Rout, M.M. Ghosh, and K. S. Ghosh Journal of Materials Engineering and Performance
Vol. 24, No. 7, pp. 2792–2805
SCI
10.1007/s11665-015-1559-1
Springer
2015
2014
16. Coupled Molecular Dynamics-Stochastic Model for Thermal Conductivity of Ethylene Glycol Based Copper Nanofluid M.M. Ghosh and R. K. Rai Journal of Nanoscience and Nanotechnology
Vol. 14, No. 4, pp. 2752-2771
SCI
10.1166/jnn.2014.8560
American Scientific Publishers
2014
2014
17. Effect of interrupted ageing on stress corrosion cracking (SCC) behaviour of an Al-Zn-Mg-Cu alloy Prasanta Kumar Rout, M.M. Ghosh, and K. S. Ghosh Procedia Materials Science
Vol. 5, pp. 1214-1223
Others
10.1016/j.mspro.2014.07.427
Elsevier
2014
2014
18. Effect of solution pH on electrochemical and stress corrosion cracking behaviour of a 7150 Al-Zn-Mg-Cu alloy Prasanta Kumar Rout, M.M. Ghosh, and K. S. Ghosh Materials Science and Engineering A
Vol. 604, pp. 156-165
SCI
10.1016/j.msea.2014.02.036
Elsevier
2014
2014
19. Improvement of stress corrosion cracking (SCC) resistance of a 7150 Al-Zn-Mg-Cu alloy by retrogression and reageing (RRA) treatment Prasanta Kumar Rout, M.M. Ghosh, and K. S. Ghosh Advanced Materials Research
Vol. 984-985, pp. 529-535
SCOPUS
10.4028/www.scientific.net/AMR.984-985.529
Trans Tech Publications
2014
2013
20. Effects of particle shape and fluid temperature on heat transfer characteristics of nanofluids M.M. Ghosh, S. Ghosh, and S. K. Pabi Journal of Materials Engineering and Performance
Vol. 22, No. 6, pp. 1525-1529
SCI
10.1007/s11665-012-0441-7
Springer
2013
2013
21. Estimation of Thermal Conductivity of Amorphous Carbon Nanotube Using Molecular Dynamics Simulations M.M. Ghosh Journal of Nanoscience and Nanotechnology
Vol. 13, No. 4, pp. 2961-2966
SCI
10.1166/jnn.2013.7366
American Scientific Publishers
2013
2013
22. A Parameter for Selection of Nano-dispersoids for Nanofluids used in Thermal Applications M.M. Ghosh, S. Ghosh, and S. K. Pabi Materials Science Forum
Vol. 736, pp. 223-228
SCOPUS
10.4028/www.scientific.net/MSF.736.223
Trans Tech Publications
2013
2012
23. Molecular Dynamics Simulation of Thermal Conductivity of Copper Nanoparticles M.M. Ghosh Advanced Science Letters
Vol. 10, No. 1, pp. 118-126
Others
10.1166/asl.2012.2143
American Scientific Publishers
2012
2012
24. On synthesis of a highly effective and stable silver nanofluid inspired by its multiscale modeling M.M. Ghosh, S. Ghosh, and S. K. Pabi Nanoscience and Nanotechnology Letters
Vol. 4, No. 8, pp. 843-848
SCI
10.1166/nnl.2012.1392
American Scientific Publishers
2012
2011
25. A molecular dynamics-stochastic model for thermal conductivity of nanofluids and its experimental validation M.M. Ghosh, S. Roy, S. K. Pabi, and S. Ghosh Journal of Nanoscience and Nanotechnology
Vol. 11, No. 3, pp. 2196-2207
SCI
10.1166/jnn.2011.3557
American Scientific Publishers
2011
2011
26. On synthesis and characterization of water based Cu9Al4-nanofluid M.M. Ghosh, S. Ghosh, and S. K. Pabi Nanoscience and Nanotechnology Letters
Vol. 3, No. 4, pp. 509-512
SCI
10.1166/nnl.2011.1202
American Scientific Publishers
2011
2011
27. A Theoretical Study on Thermal Conductivity of Zn-Nanofluid M.M. Ghosh, S. Ghosh, and S. K. Pabi International Journal of Modern Engineering Research
Vol. 1, No. 2, pp. 400-406
Others
IJMER
2011
Conferences
ID
Details
Year
2020
1.M.M. Ghosh and Sujoy Das, “An experimental study on synthesis, characterization, thermal conductivity and stability of nanofluids for advanced thermal applications”, Presented in the International Conference “12th Asia – Pacific Microscopy Conference (APMC-2020)” held at Hyderabad, India during Feb. 03-07, 2020, Abstract published in the Conference Proceedings.
Hyderabad, India
2020
2020
2.Palas Kar, P. Siva Prasad, K. Das, M.M. Ghosh, and K.S. Ghosh, “Study of surface morphology of pulse electrodeposited nanocrystalline (NC) Ni-Mo alloy coating”, Presented in the International Conference "Nano Science and Technology" held at Kolkata, India during Mar. 05-07, 2020, Abstract published in the Conference Proceedings.
Kolkata, India
2020
2020
3.M.M. Ghosh and Gaurav Kumar Singh, “Precipitation Hardening Heat Treatments of C250 Grade Maraging Steel and the Resultant Properties”, Presented in the International conference “Sixth Asian Conference on Heat Treatment and Surface Engineering (HTSE-2020)" held at Chennai, India during Mar. 05-07, 2020, Abstract published in the Conference Proceedings.
Chennai, India
2020
2019
4.M.M. Ghosh, Krishnan Bandyopadhyay and Sujoy Das, “Multiscale Model Based Design and Development of Efficient Nanofluids for use as Coolants in Advanced Applications”, Presented in the International Conference “NMD ATM 2019” held at Kovalam, Thiruvananthapuram, Kerala, India during Nov. 13-16, 2019, Abstract published in the Conference Proceedings.
Kovalam, Thiruvananthapuram, Kerala, India
2019
2019
5.M.M. Ghosh and Sujoy Das, Synthesis, Characterization and Thermal Conductivity Modeling of Nanofluids for Advanced Heat Transfer Applications, Presented in the International Conference "Nanotech France 2019" held at Paris, France during June 26-28, 2019, Abstract published in the Conference Proceedings.
Paris, France
2019
2018 or before
6.SOME EARLIER CONFERENCES:
Sujoy Das and M.M. Ghosh, Applications of Nanotechnology for Nanofluids Research, Presented in the 3rd Regional Science & Technology Congress (Western Region) 2018, held at Sidho-Kanho-Birsha University, Purulia, West Bengal, India during Dec. 20-21, 2018, Abstract Published in the Conference Proceedings (Page no. 158).
Sujoy Das, Krishnan Bandyopadhyay, and M.M. Ghosh, Thermal Conductivity Enhancement of Nanofluids Containing Chemically Synthesized Nanoparticles, Presented in the International Conference "NMD ATM 2018" held at Kolkata, India during Nov. 14 - 16, 2018 and Abstract Published in the Conference Proceedings.
Krishnan Bandyopadhyay, Sujoy Das, K.S. Ghosh and M.M. Ghosh, Estimation of Intrinsic Stacking Fault Energy of Cu-Ag Binary Alloys With Different Alloy Compositions Using Equilibrium MD Approach, Presented in the International Conference "NMD ATM 2018" held at Kolkata, India during Nov. 14 - 16, 2018 and Abstract Published in the Conference Proceedings.
Ajay Kumar Mishra and M.M. Ghosh, Crack Propagation and Fracture Characteristics of Tungsten Single Crystal Nano-Particles: A Molecular Dynamics Study, Presented in the International Conference "NMD ATM 2018" held at Kolkata, India during Nov. 14 - 16, 2018 and Abstract Published in the Conference Proceedings.
Krishnan Bandyopadhyay, K.S. Ghosh and M.M. Ghosh, Molecular Dynamics Based Modelling of Tensile Deformation and Nanoindentation of Tungsten Nanoparticles for Estimating Useful Mechanical Properties, Presented in the "8th International Conference on Materials Processing and Characterization (ICMPC - 2018)" held at Hyderabad, India during Mar. 16 - 18, 2018 and Abstract Published in the Conference Proceedings (Abstract no.: 1777, Page no.: 219).
Agniswami Behera and M.M. Ghosh, Effect of Irradiation on the Tensile Properties of Nano-sized Ti-Al Alloy Single Crystals: A Study Using Molecular Dynamics Simulations, Presented in the "8th International Conference on Materials Processing and Characterization (ICMPC - 2018)" held at Hyderabad, India during Mar. 16 - 18, 2018 and Abstract Published in the Conference Proceedings (Abstract no.: 1767, Page no.: 216).
K. Bandyopadhyay, K.S. Ghosh and M.M. Ghosh, Molecular Dynamics Simulations of Nanoindentation to Evaluate the Mechanical Properties of Various Metallic Alloy Nanoparticles, Presented in the 29th Annual General Meeting of Materials Research Society of India and National Symposium on "Advances in Functional and Exotic Materials" held at Tiruchirapally, India during Feb. 14 - 16, 2018 and Abstract Published in the Conference Proceedings (Abstract no.: 187, Page no.: 191).
Sujoy Das, Krishnan Bandyopadhyay and M.M. Ghosh, A Highly Effective Nanofluid Produced Through Two-step Method, Presented in the "International Conference on Current Trends in Materials Science and Engineering (CTMSE - 2018)" held at Kolkata, India during Jan. 19 - 20, 2018 and Abstract Published in the Conference Proceedings (Abstract no.: 99, Page no.: 165).
K. Bandyopadhyay, K.S. Ghosh and M.M. Ghosh, On Lattice Parameter, Cohesive Energy and Stacking Fault Energy Estimation of Cu-Ni Alloy Single Crystals of Different Alloy Compositions using MD Approach, Presented in the "International Conference on Current Trends in Materials Science and Engineering (CTMSE - 2018)" held at Kolkata, India during Jan. 19 - 20, 2018 and Abstract Published in the Conference Proceedings (Abstract no.: 102, Page no.: 57).
Agniswami Behera and M.M. Ghosh, Study on Radiation Damage of Nanosized Metallic Single Crystals Using Molecular Dynamics, Presented in the "International Conference on Nanotechnology : Ideas, Innovations & Initiatives - 2017 (ICN:3I - 2017)" held at IIT, Roorkee, India during Dec. 06 - 08, 2017 and Abstract Published in the Conference Proceedings (Abstract no.: 410, Page no.: 647).
Sujoy Das and M.M. Ghosh, Synthesis, Characterization and Thermal Conductivity Investigation of Nanofluids Containing Copper and Silver Nanoparticles, Presented in the "2nd Regional Science and Technology Congress 2017 (Western Region)" held at the University of Burdwan, Bardhaman, West Bengal, India during Nov. 16 - 17, 2017 and Abstract Published in the Conference Proceedings (Abstract no.: EG 08, Page no.: 206).
Dhiman Kumar Das and M.M. Ghosh, Evaluation of Thermal Conductivity of Single Layer Graphene Sheet by Non-equilibrium Molecular Dynamics Approach, Presented in the International Conference "NMD ATM 2017" held at Goa, India during Nov. 11 - 14, 2017 and Abstract Published in the Conference Proceedings (Abstract no.: 371).
K. Bandyopadhyay, K.S. Ghosh and M.M. Ghosh, Molecular Dynamics Simulations of Nanoindentation to Evaluate the Mechanical Properties of Various Metallic Single Crystal Nanoparticles, Abstract Published in the Conference Proceedings of the International Conference "NMD ATM 2017" held at Goa, India during Nov. 11 - 14, 2017 (Abstract no.: 89).
Agniswami Behera and M.M. Ghosh, Radiation Damage of Pure Metal and Alloy Nanoparticles: A Study Using Molecular Dynamics Simulation, Presented in the International Conference "NMD ATM 2017" held at Goa, India during Nov. 11 - 14, 2017 and Abstract Published in the Conference Proceedings (Abstract no.: 53).
Palas Kar, K. Das, M.M. Ghosh and K.S. Ghosh, Synthesis and Characterization of Nanocrystalline (NC) Ni and Ni-Mo Deposits by Pulse Electrodeposition, Presented in the International Conference "NMD ATM 2017" held at Goa, India during Nov. 11 - 14, 2017 and Abstract Published in the Conference Proceedings (Abstract no.: 71).
Amrik Kundu, Ranajit Saha, Manab Mallik, and M.M. Ghosh, Synthesis and Characterization of Aluminium Based Metal Matrix Composite Reinforced with Al2O3 Particles for Structural Applications, Presented in National Conference on "Advanced Functional Materials Processing and Manufacturing" (NCAFMPM 2017) held at CMERI, Durgapur during Feb. 02 - 03, 2017, Extended Abstract Published in the Conference Proceedings "NCAFMPM 2017" (Page no. 15 - 17).
Sujoy Das and M.M. Ghosh, Synthesis, Characterization and Performance Evaluation of Nanofluids, Published in the Conference Proceedings of the International Conference "NMD ATM 2016" held at Kanpur, India during Nov. 11-14, 2016.
K. Bandyopadhyay, K.S. Ghosh, and M.M. Ghosh, Modelling Nanoindentation of Copper Nanoparticles for the Estimation of Mechanical Properties using Molecular Dynamics, Published in the Conference Proceedings of the International Conference "NMD ATM 2016" held at Kanpur, India during Nov. 11-14, 2016.
D.K. Das and M.M. Ghosh, Evaluation of Mechanical Properties of Single Layer Graphene Sheet by Various MD Approaches, Published in the Conference Proceedings of the International Conference "NMD ATM 2016" held at Kanpur, India during Nov. 11-14, 2016.
Sujoy Das, Krishnan Bandyopadhyay, K. S. Ghosh, and M.M. Ghosh, An Overview of Nanofluids: Synthesis, Characterization and Application, Presented in 22nd Conference on "West Bengal State Science and Technology Congress" held at North Bengal University, Darjeeling, West Bengal, India during Feb. 28 to Mar. 01, 2015, Abstract Published in the Conference Proceedings "WBSSTC 2015" (Page no. CS-28).
Sujoy Das and M.M. Ghosh, Estimation of Thermal Conductivity of Nanofluids Using MD-Stochastic Simulation Based Approach, Presented in the XIII International Conference on "Metallurgical and Materials Engineering" (ICMME 2015) held at London, UK during Jan. 19-20, 2015, Published in the Conference Proceedings "ICMME 2015".
Krishnan Bandyopadhyay, Jit Sarkar, Sujoy Das, Priyendu Narayan Giri, Boina Sagar, Mani Ranjan, Biswajit Adhikary, K. S. Ghosh and M.M. Ghosh, Molecular Dynamics Study of the Effects of Particle Size and Strain Rate on the Tensile Properties of Copper Nanoparticles under Ultra-high Strain Rates, Presented in the International Conference on "Emerging Materials: Characterization and Application (EMCA 2014)" held at Kolkata during Dec. 04-06, 2014, Extended Abstract published in the Conference Proceedings "ECMA 2014" (Page no. 135).
Krishnan Bandyopadhyay, Jit Sarkar, Sujoy Das, Satayu Bakshi, Anirban Das, K. S. Ghosh and M.M. Ghosh, MD Simulation of Tensile Properties of Copper Nanoparticles, Published in the Conference Proceeding of the International Conference "NMD ATM 2014" held at Pune, India during Nov. 12-15, 2014.
S. Das, R. K. Rai, and M.M. Ghosh, A Model of Heat Transfer in Nanofluids Using MD-Stochastic Simulation, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 8: 2013), held at Calicut, India during Dec. 13-15, 2013.
M.M. Ghosh and R. K. Rai (2013), Modelling Heat Transfer in Nanofluids Based on Coupled MD-Stochastic Simulation, In: Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM: 8, 2013), Edited by Fernand Marquis, TMS (The Minerals, Metals & Materials Society), 2013, pp. 2815-2820, John Wiley & Sons, Inc., Hoboken, NJ, USA, DOI: 10.1002/9781118792148.ch348, Published Online: 6 SEP 2013, Published Print: 16 AUG 2013, Print ISBN: 9780470943090, Online ISBN: 9781118792148.
S. Ghosh, M.M. Ghosh, V. Karthik, and S. K. Pabi, Multi-scale stochastic-molecular dynamics approach to estimate thermal conductivity of nanofluids, International Conference NMD ATM 2011 held at Hyderabad, India during Nov. 13-16, 2011.
S. Ghosh, M.M. Ghosh, and S. K. Pabi, A Coupled MD-Stochastic Model Predicting Far Superior Heat Transfer Ability of Silver Nanofluid Compared to Copper Nanofluid, International Conference ICANN 2009 held at Guwahati, India during Dec. 09-11, 2009.
M.M. Ghosh, S. K. Pabi, and S. Ghosh, A MD-Stochastic Model Leading to the Development of a Magnificent Water Based Nanofluid, Presented in International Conference NMD ATM 2009 held at Kolkata, India during Nov. 14-17, 2009.
M.M. Ghosh, S. K. Pabi, and S. Ghosh, Thermal conductivity of water based Cu9Al4 nanofluids: simulation and experiments, Presented in International Conference "Asian Particle Technology" (APT 2009) held at New Delhi, India during Sept. 14-16, 2009.
Sujoy Das and M.M. Ghosh, Thermal Conductivity of Nanofluids: A Study using MD Simulation coupled with Stochastic Analysis, Abstract published in Conference Proceedings of the international conference "First Thermal and Fluids Engineering Summer Conference (TFESC-2015)" held at New York, USA during Aug. 09-12, 2015.
Held at different places
2018 or before
Books
ID
Title
Patents
ID
Details
Patent Filed Year
2009
1.
Stable dispersion of surface capped silver nanopowder in hydrophilic medium with enhanced thermal conductivity
2017
M.M. Ghosh, S. Ghosh, and S. K. Pabi
Granted
2009
2018
2.
An Effective Method for the Synthesis of Silver Nanoparticles with Very Small Size and Narrow Size Distribution through Chemical Route
Sujoy Das, Krishnan Bandyopadhyay and M.M. Ghosh
Submitted
2018
Awards and Recognitions
i) A "Book Prize" for securing the highest marks in B. E., 8th Semester Exam. (1997-98) in Metallurgical Engg. branch of R. E. College, Durgapur (presently, NIT Durgapur).
ii) Obtained "National Scholarship" offered by Ministry of Human Resource Development, Govt. of India, on the basis of Madhyamik Pariksha (Secondary Examination) results (secured 135 rank in the merit list) in the year 1991-92.
iii) Awarded second prize in the Quiz Contest on "Human Evolution Science" serial organized jointly by All India Radio and National Council of Science and Technology Communication.
Administrative Responsibilities
1) Head of the Department of Metallurgical and Materials Engineering (Since Jan. 23, 2019)
2) Warden of Hall # 3 (NIT Durgapur, Formerly, RE College Durgapur) for 3 years (May, 2001 – May, 2004)
Contact
Mobile : +91-9434788182 Email : madanmohan.ghosh@mme.nitdgp.ac.in, mmgnitd@gmail.com
Miscellaneous
Industrial Experience:
Organization
Designation
From
To
Flender Limited, Kharagpur, India
Graduate Engineer Trainee
Jan., 1999
Dec., 1999
Flender Limited, Kharagpur, India
Assistant Manager
(in Heat Treatment Shop)
Jan., 2000
Mar., 2001
Professional Training:
Period
Organization
Nature of professional training/research experience
Aug. 25-26, 2001
Advanced Forming Technology Centre, Bangalore, India
Seminar on "Computer Simulation and Modeling of Materials Processing Operations"
Feb. 09-10, 2002
Bureau of Indian Standards, New Delhi and Regional Engineering College, Durgapur
Educational Utilization of Standards Programme on "Standardization, Product Certification and Quality Systems"
Apr. 24–28, 2006
Dept. of Physics, National Institute of Technology Durgapur
Short Term Course on "Materials Property and Characterization"
Aug. 30–Sept. 01, 2006
Continuing Education Centre, NIT Durgapur in collaboration with National Institute of Technical Teachers' Training and Research, Kolkata
Short Term Training Programme on "Effective Teaching Skills"
June 25 –July 14, 2012
Indian Institute of Science, Bangalore, India
Short Term Course on "Mechanical Property Characterization"
Dec. 17 –22, 2012
Indian Institute of Science, Bangalore, India
Short Term Course on "Scanning Electron Microscopy"
Feb. 18–22, 2013
Indian Institute of Technology, Roorkee, India
Short Term Course on "Essentials of Nanoscience and Nanotechnology"
May 06 –10, 2013
MANIT, Bhopal, India
Short Term Course on "Finite Element Modeling with Matlab"
July 01–05, 2013
Indian Institute of Technology, Mandi, India
Short Term Course on "Finite Element Method For Engineering Applications"
Nov. 11–22, 2013
Indian Institute of Technology, Kharagpur, India
Short Term Course on "Materials Engineering and Industrial Applications: Hybrid Nanocomposites for Photonics, Energy and Electronic Devices"
Dec. 23 –27, 2013
Indian Institute of Science, Bangalore, India
Short Term Course on "Integrated Computational Materials Engineering"
Jan. 07–11, 2014
Indian Institute of Technology, Roorkee, India
Short Term Course on "Modeling and Simulations using Finite Element Methods"
June 08-12, 2014
Indian Institute of Science, Bangalore, India
Short Term Course on "Phase-Field Modeling"
June 22-27, 2014
Indian Institute of Science, Bangalore, India
Short Term Course on "Molecular Dynamics and Monte Carlo Methods"
Dec. 04-06, 2014
Department of IT, Biotechnology and Science & Technology, Government of Karnataka under the guidance of Vision Group on Nanotechnology and Jawaharlal Nehru Centre for Advanced Scientific Research (JNCASR)
International Conference "7th Bangalore India Nano"
Nov. 27-28, 2015
Indian Institute of Science, Bangalore, India
Workshop on "Interface Related Mechanical Behavior of Materials - II"
May 16-18, 2016
Indian Institute of Technology, Kharagpur, India
Workshop on "Lithium Ion Battery Technology and Mathematical Modeling"
Aug. 27 - Sept. 01, 2018
IIT - BHU, Varanasi, India
QIP short term course and continuing education program on "Mechanical Properties and Deformation Behavior of Structural Materials"
Courses Organized:
1. Short Term Course on "Metallurgy and Materials Technology" (MMT-2013) (under TEQIP-II) in the Dept. of Metallurgical and Materials Engg., NIT Durgapur, India during Oct. 28-Nov. 01, 2013 (as co-ordinator).
2. Short Term Course on "Mechanical Behaviour and Modelling of Materials" (MBMM-2017) (under CoE, TEQIP-II) in the Dept. of Metallurgical and Materials Engg., NIT Durgapur, India during Feb. 06 - 10, 2017 (as co-ordinator).
3. Short Term Course on "Processing, Characterization and Applications of Advanced Materials" (PCAAM-2017) (under CoE, TEQIP-II) in the Dept. of Metallurgical and Materials Engg., NIT Durgapur, India during Feb. 27 - Mar. 03, 2017 (as co-ordinator).
4. Short Term Course on "Computational Materials Modelling & Simulation" (CMMS-2020) (under CoE, TEQIP-III) in the Dept. of Metallurgical and Materials Engg., NIT Durgapur, India during Feb. 17 - 21, 2020 (as co-ordinator).
Membership of Professional Bodies:
Life Member of Indian Institute of Metals (LMIIM)
Member of ASM International
Member of Materials Research Society (MRS)
Member of the Minerals, Metals and Materials Society (TMS)
Reviewer of:
Computational Materials Science, Modelling and Simulation in Materials Science and Engineering, Journal of Nanoparticle Research, RSC Advances, Materials Research Express, Acta Mechanica, Journal of Materials Engineering and Performance, Journal of Mechanical Engineering Science, Journal of Materials and Metallurgical Engineering, Journal of Physics and Chemistry of Solids, Microfluidics and Nanofluidics, Proceedings of the First Thermal and Fluids Engineering Summer Conference, 2015 (New York, USA)
Reviewer of - four Ph. D. Thesis of Anna University, Chennai, India (completed)
- one Ph. D. Thesis of NIT, Tiruchirappalli, India (completed)
Foreign Exposures:
1) Visited Rensselaer Polytechnic Institute, Troy, NY, USA during Sept. 26 - Nov. 08, 2016 as a Visiting Scholar for a collaborative research program on "Molecular Modeling and Simulation of the Dynamics of a Nano-droplet Embedded into its Own Vapor" with Prof. Pawel Keblinski, Prof. Ganpati Ramanath of Materials Science and Engineering Dept. and Prof. Theodorean Borca-Tasciuc of the Dept. of Mechanical, Aerospace and Nuclear Engg.
2) Visited London, UK in 2015 for presenting a research work in an international conference "ICMME 2015"
3) Visited Paris, France in 2019 for presenting a research work in an international conference "NANOTECH France 2019"
Invited Lectures:
Title of the lecture
Programme
Place
Date
1) Materials Modelling and Simulation: An Introduction
2) MD Modelling and Simulation
3) Synthesis, Characterization and Design of Nanofluids for Advanced Thermal Applications
Hands on training programme on "Computational Materials Science and Modelling"
College of Engineering and Management, Kolaghat, West Bengal, India
Mar. 17-19, 2017
Participation as a session chair/co-chair in conferences:
Name of the faculty
Session chair/co-chair/ convenor
Programme
Place
Session
Date
M. M. Ghosh
Session Chair
XIII International Conference on "Metallurgical and Materials Engineering" (ICMME 2015) held at London, UK during Jan. 19-20, 2015
Holiday Inn, Wembley, London, UK
Computational Materials Science
(Session III, Jan. 19, 2015, Room: A, Holiday Inn London,
13:30-15:30)
Jan. 19-20, 2015
M. M. Ghosh
Session Co-chair
International Conference on Precision. Meso, Micro and Nano Engineering
(COPEN - 8: 2013)
N.I.T, Calicut, Kerala, India
Modeling and Simulation (Session IIID,
Dec. 14, 2013,
Architecture Dept. Conf. Hall, NIT Calicut,
15:45 - 17:15)
Dec. 13-15, 2013
Community Services:
i) Engaged in literacy drive in a tribal village
ii) Provides financial help to poor people before festival (Durga Puja) and during their needs
ERP
Faculty Recruitment @2024 
