Metallurgical & Materials Engineering

Faculty Details

Manas Kumar Mondal Associate Professor
Joined the Institute in 2008
mkmondal[dot]mme[at]nitdgp[dot]ac[dot]in
Publication

82

Publications

1

Sponsored Projects

0

Consultancy Projects
Education

9

Doctoral Students

0

UG Students

11

PG Dissertation
Education

Ph.D. in Engineering (Metallurgical & Materials Engineering) from National Institute of Technology Durgapur (NITD) in July 2014.

M. E. in Materials Engineering from Indian Institute of Science, Bengaluru in 2007.

B.E. in Metallurgical Engineering from National Institute of Technology Durgapur (NITD) in 2005.

Work Experiences

Associate Professor in the Metallurgical & Materials Engineering, National Institute of Technology, Durgapur from October 16, 2018- till date

Assistant Professor in the Metallurgical & Materials Engineering, National Institute of Technology, Durgapur from October  27, 2008- October 15, 2018

Junior Manager in the Department of R & D and SS, JSW Steel Limited Vijayanagar Works, Bellary, Karnataka from  August 2007 to October 2008.

Research Interest

Development of Al alloy and its  Composites, finite element analysis, Mathematical Modeling of Metallurgical Processes

Projects
Title Investigator Co-investigator Sponsered Agency Duration Status

Development of Al-Mg2Si Composite through Novel Equal Channel Angular Squeeze Casting (ECASC) Technique

 Dr. M. K. Mondal NA Science and Engineering Research Board (SERB) Department of Science and Technology, Government of India. 3 years Ongoing

 

Teachings

UG:

       MMC-301: Metallurgical Thermodynamics & Kinetics 

       MM-403: Iron Making

       MM-504: Transport Phenomena

       MM 604: Steel making

       MM 701: Mathematical Modeling and Simulation

       MM 824: Secondary Steel Making

PG:

     MT 1001: Thermodynamics and Kinetics of Engineering Materials

     MT 9013: Secondary Steel Making

UG Students

Data Not Found!

PG Students

Data Not Found!

Doctoral Students

Suvam Chatterjee

Suvam Chatterjee

Ph.D. (Completed)
Joining of dissimilar metals
An approach for effective joining of dissimilar metals used in supercritical boilers.
Suvam Chatterjee

Suvam Chatterjee

Ph.D. (Completed)
Joining of dissimilar metals
An approach for effective joining of dissimilar metals used in supercritical boilers.
Tanay Rudra Paul

Tanay Rudra Paul

Ph.D. (Completed)
Development of ceramic composite
Processing, microstructure and properties of ZrB2 based ultra high temperature ceramic composites
Tanay Rudra Paul

Tanay Rudra Paul

Ph.D. (Completed)
Development of ceramic composite
Processing, microstructure and properties of ZrB2 based ultra high temperature ceramic composites
Ritwik Das

Ritwik Das

Ph.D. (Completed)
Utilization of industrial waste
Study on the mechanical working of blast furnace flue dust – iron oxide – graphite composite briquette made with fly ash as a binder.
Ritwik Das

Ritwik Das

Ph.D. (Completed)
Utilization of industrial waste
Study on the mechanical working of blast furnace flue dust – iron oxide – graphite composite briquette made with fly ash as a binder.
Prosanta Biswas

Prosanta Biswas

Ph.D. (Completed)
Development of Metal matrix Composite
Development and micromechanics of in-situ Al-Mg2Si composites
Prosanta Biswas

Prosanta Biswas

Ph.D. (Completed)
Development of Metal matrix Composite
Development and micromechanics of in-situ Al-Mg2Si composites
Sayandip Sarkar

Sayandip Sarkar

Ph.D. (Ongoing)
Sayandip Sarkar

Sayandip Sarkar

Ph.D. (Ongoing)
Logachander K

Logachander K

Ph.D. (Ongoing)
Logachander K

Logachander K

Ph.D. (Ongoing)
Sougata Barik

Sougata Barik

Ph.D. (Ongoing)
Sougata Barik

Sougata Barik

Ph.D. (Ongoing)
Anjan Pal

Anjan Pal

Ph.D. (Ongoing)
Anjan Pal

Anjan Pal

Ph.D. (Ongoing)
Rahul Bhandari

Rahul Bhandari

Ph.D. (Ongoing)
Year of Enrollment - 2018
Rahul Bhandari

Rahul Bhandari

Ph.D. (Ongoing)
Year of Enrollment - 2018

Projects

Sl.No. Title Name of the PI Name of the CoPIs Funding Agency Amount (Rs.) Project Type Project Status Date of Initiation Date of Completion
1 Development of Al-Mg2Si Composite through Novel Equal Channel Angular Squeeze Casting (ECASC) Technique Manas Kumar Mondal Science and Engineering Research Board (SERB) Department of Science and Technology, Government of India. Sponsored Ongoing

Projects

Sl.No. Title Name of the PI Name of the CoPIs Funding Agency Amount (Rs.) Project Type Project Status Date of Initiation Date of Completion
1 Development of Al-Mg2Si Composite through Novel Equal Channel Angular Squeeze Casting (ECASC) Technique Manas Kumar Mondal Science and Engineering Research Board (SERB) Department of Science and Technology, Government of India. Sponsored Ongoing

Projects

Sl.No. Title Name of the PI Name of the CoPIs Funding Agency Amount (Rs.) Project Type Project Status Date of Initiation Date of Completion
Indexing

0

Google Scholar h-index

0

Google Scholar i10-index

0

Scopus h-index

Journals

ID Details Year
2023 1. Enhancement of strength of blast furnace flue dust – iron oxide – fly ash composite briquette using ANOVA-based mathematical model R. Das, M. K. Mondal and S. Pramanik Ironmaking & Steelmaking SCI 10.1080/03019233.2023.2200596 TAYLOR & FRANCIS LTD https://doi.org/10.1080/03019233.2023.2200596 2023
2023 2. Fabrication of a CO2 Gas Sensor Based on ZnO Thin Film from the Perspective of Sensing Vehicle Tailpipe-Emitted Pollution D. Bej, N. Chattaraj, R. Mahapatra, M. K. Mondal and C. Ghosh Journal of Electronic Materials SCI 10.1007/s11664-023-10375-0 Spinger https://doi.org/10.1007/s11664-023-10375-0 2023
2023 3. Thermochemical behaviour, solidification, thermal stability and oxidation of Al-Mg2Si composites: An experimental and thermodynamic study P. Biswas, M. Paliwal, and M. K. Mondal Materials Today Communications Vol. 35 &105913 SCIE 10.1016/j.mtcomm.2023.105913 Elsevier https://doi.org/10.1016/j.mtcomm.2023.105913 2023
2023 4. Microwave-assisted reduction of graphene oxide using Artemisia vulgaris extract for supercapacitor application S. Tamang, S. Rai, M. K. Mondal, N. K. Bhattacharyya, B. P. Swain, and J. Biswas Journal of Materials Science: Materials in Electronics Vol. 34 & 575 (1-18) SCI 10.1007/s10854-023-09995-3 Spinger https://doi.org/10.1007/s10854-023-09995-3 2023
2023 5. Microstructure based numerical simulation of the micromechanics and fracture in hypereutectic Al–Mg2Si composites R. Bhandari, P. Biswas, M. Mallik and M. K. Mondal Materials Chemistry and Physics Vol. 297 & 127427 SCI 10.1016/j.matchemphys.2023.127427 Elsevier https://doi.org/10.1016/j.matchemphys.2023.127427 2023
2023 6. Compressive failure analysis of in-situ Al-Mg2Si composites: Experiment and finite element modelling P. Biswas, D. Mandal and M. K. Mondal Engineering Fracture Mechanics Vol. 277 & 108986 SCI 10.1016/j.engfracmech.2022.108986 Elsevier https://doi.org/10.1016/j.engfracmech.2022.108986 2023
2023 7. Comparison of Compressive Strength of Fly Ash Bonded Flue Dust Briquettes with that of Briquettes made with Bentonite, Sodium Silicate, Lime, Starch, Pitch, Molasses and Dextrin Binder R. Das, M. K. Mondal and S. Pramanik Transactions of the Indian Institute of Metals Vol. 76 & 1253–1262 SCIE 10.1007/s12666-022-02829-6 Spinger https://doi.org/10.1007/s12666-022-02829-6 2023
2022 8. Interfacial characterization of additively manufactured stainless steel to aluminium thin wall with nickel interlayer A. R. Paul, M. Mukherjee, D. Singh, and M. K. Mondal Journal of Materials Research Vol. 37 & 3629–3645 SCIE 10.1557/s43578-022-00732-w Spinger https://doi.org/10.1557/s43578-022-00732-w 2022
2022 9. Thermal shock behavior of ZrB2-MoSi2-SiC Composites T. R. Paul, M. K. Mondal and M. Mallik Journal of Alloys and Compounds Vol. 924 & 166443 SCI 10.1016/j.jallcom.2022.166443 Elsevier https://doi.org/10.1016/j.jallcom.2022.166443 2022
2022 10. Investigation of optical and electrical properties of graphene oxide/silicon nanowires heterojunction S. Rai, R. Bhujel, M. K. Mondal, J. Biswas, and B. P. Swain Journal of Materials Science: Materials in Electronics Vol. 33 & 16501-16510 SCI 10.1007/s10854-022-08540-y Spinger https://doi.org/10.1007/s10854-022-08540-y 2022
2022 11. Equal channel angular pressing die design through finite element analysis method for non-strain hardening material R. Bhandari, P. Biswas, A. Pathania, M. Mallik and M. K. Mondal Canadian Metallurgical Quarterly Vol. 61 & 493 – 512 SCI 10.1080/00084433.2022.2046905 TAYLOR & FRANCIS LTD https://doi.org/10.1080/00084433.2022.2046905 2022
2022 12. Strengthening Behaviour and Microstructural Properties during the Compaction of Reduced Blast Furnace Flue Dust—Fly Ash—Iron Metal Matrix Composite Fines using Powder Metallurgy Route R. Das, M. K. Mondal, and S. Pramanik Transactions of the Indian Institute of Metals Vol. 75 & 2255-2263 SCIE 10.1007/s12666-022-02592-8 Spinger https://doi.org/10.1007/s12666-022-02592-8. 2022
2022 13. Effect of Extrusion on the Physical and Mechanical Properties of Briquette Made with Blast Furnace Flue Dust and Iron Ore Fines R. Das, M. K. Mondal, and S. Pramanik Journal of The Institution of Engineers (India): Series D Vol. 103 & 473-478 SCOPUS 10.1007/s40033-022-00360-y Spinger https://doi.org/10.1007/s40033-022-00360-y 2022
2022 14. Study of the morphological, optical, structural and electrical properties of silicon nanowires at varying concentrations of the catalyst precursor S. Rai, R. Bhujel, M. K. Mondal, B. P. Swain and J. Biswas Materials Advances Vol. 3 & 2779-2785 SCOPUS 10.1039/D1MA01145F Royal Society of Chemistry https://doi.org/10.1039/D1MA01145F 2022
2022 15. Diffusional evolution of σ-phase to resolve a long-standing dissimilar material joining issue in supercritical boiler S. Chatterjee, M. K. Mondal, and J. Maity Philosophical Magazine Vol. 102 & 559–588 SCI 10.1080/14786435.2021.2011978 Spinger https://doi.org/10.1080/14786435.2021.2011978. 2022
2021 16. Densification behavior of ZrB2–MoSi2–SiCw composite processed by multi stage spark plasma sintering T. R. Paul, M. K. Mondal and M. Mallik Ceramics International Vol. 47 & 31948-31972 SCI 10.1016/j.ceramint.2021.08.081 Elsevier https://doi.org/10.1016/j.ceramint.2021.08.081 2021
2021 17. Experimental Analysis of T23–T91 Dissimilar Steel Joining in Supercritical Boiler by a Cost-Effective Fusion Welding Route S. Chatterjee, M. K. Mondal, and J. Maity Steel Research International Vol. 92 & 2100063 (1 to 13) SCI 10.1002/srin.202100063 Wiley Online Library https://doi.org/10.1002/srin.202100063 2021
2021 18. Fusion Welding of T23 and T91 Steel Joints for Advanced Thermal Power Plant Application S. Chatterjee, M. K.Mondal, and J. Maity Journal of Materials Engineering and Performance Vol. 30 & 7655-7667 SCIE 10.1007/s11665-021-05884-0 Spinger https://doi.org/10.1007/s11665-021-05884-0. 2021
2021 19. Effect of TiB2 and Al3Ti on Microstructure, Mechanical Properties and Fracture Behaviour of Near Eutectic Al-12.6Si Alloy S. Basak, P. Biswas, S.Patra, H. Roy and M. K. Mondal International Journal of Minerals, Metallurgy and Materials  Vol. 28 & 1174-1185 SCI 10.1007/s12613-020-2070-8 Spinger https://doi.org/10.1007/s12613-020-2070-8 2021
2021 20. Abrasive wear performance and wear map of ZrB2-MoSi2-SiCw composites T. R. Paul, M. K. Mondal, and M. Mallik Journal of the European Ceramic Society vol. 41 & 3227-3251 SCIE 10.1016/j.jeurceramsoc.2021.01.005 Elsevier https://doi.org/10.1016/j.jeurceramsoc.2021.01.005 2021
2021 21. Study on Reduction of Blast Furnace Flue Dust Briquette Made with Fly Ash as Binder R. Das, M. K. Mondal, and S. Pramanik Journal of The Institution of Engineers (India): Series D Vol. 102 & 173–183 SCOPUS 10.1007/s40033-020-00246-x Springer https://doi.org/10.1007/s40033-020-00246-x. 2021
2021 22. Effect of Mn addition on the mechanical properties of Al-12.6Si alloy: Role of Al15(MnFe)3Si2 intermetallic and microstructure modification P. Biswas, S. Patra, H. Roy, C. S. Tiwary, M. Paliwal and M. K. Mondal Metals and Materials International Vol. 27 & 1713–1727 SCIE 10.1007/s12540-019-00535-5 Springer https://doi.org/10.1007/s12540-019-00535-5 2021
2020 23. Structure-property correlation of eutectic Al-12.4 Si alloys with and without Zirconium (Zr) addition 20. P. Biswas, S. Patra & M. K. Mondal International Journal of Cast Metals Research Vol. 23 & 134-145 SCIE 10.1080/13640461.2020.1769319 Taylor & Francis Inc https://doi.org/10.1080/13640461.2020.1769319 2020
2020 24. Structure-Property Correlation of Hypoeutectic Al-7.6Si Alloys with and without Al-5Ti-1B Grain Refine P. Biswas, S. Gupta, M. K. Mondal, R. Bhandari and S. Pramanik Journal of Scientific & Industrial Research Vol. 79 & 696-700 SCIE 10.56042/jsir.v79i8.41414 New Delhi: CSIR-National Institute of Science Communication and Policy Research (CSIR-NIScPR) http://nopr.niscair.res.in/handle/123456789/55219 2020
2020 25. Failures analysis of in-situ Al–Mg2Si composites using actual microstructure based model. P. Biswas, D. Mandal and M. K. Mondal Materials Science and Engineering A Vol. 797 & 140155 SCI 10.1016/j.msea.2020.140155 Elsevier https://doi.org/10.1016/j.msea.2020.140155 2020
2020 26. Fast response and low temperature sensing of acetone and ethanol using Al-doped ZnO microrods M. Sinha, R. Mahapatra, M. K. Mondal, S. Krishnamurthy, and R. Ghosh Physica E: Low-dimensional Systems and Nanostructures 118 SCI https://doi.org/10.1016/j.physe.2019.113868 ELSEVIER 2020
2019 27. Micromechanical response of Al–Mg2Si composites using approximated representative volume elements (RVEs) model P. Biswas, D. Mandal and M. K. Mondal Materials Research Express 6, 1165c6 SCIE https://doi.org/10.1088/2053-1591/ab4e4f IOP publishing 2019
2019 28. Effect of Bi addition on microstructure and mechanical properties of hypereutectic Al-17.6Si alloy P. Biswas , K. D. Prasadu and M. K. Mondal Materials Research Express 6, 1165b9 SCIE https://doi.org/10.1088/2053-1591/ab4d34 IOP Publishing 2019
2019 29. Microstructure dependent physical and mechanical properties of spark plasma sintered ZrB2-MoSi2–SiCw composites T. R. Paul, M. K. Mondal and M. Mallik International Journal of Refractory Metals & Hard Materials Vol. 79, pp. 131-137 SCIE https://doi.org/10.1016/j.ijrmhm.2018.11.017 ELSEVIER 2019
2019 30. Effect of Mg2Si Concentration on the Dry Sliding Wear Behavior of Al–Mg2Si Composite P. Biswas, M. K. Mondal and D. Mandal Journal of Tribology-Transactions of the ASME Vol. 141 (8), pp. 081601-11 SCI https://doi.org/10.1115/1.4043779 ASME 2019
2018 31. Finite element analysis of stress-strain localization and distribution in Al-4.5Cu-2Mg alloy R. Bhandari, P. Biswas, M. K. Mondal and D. Mandal Transactions of Nonferrous Metals Society of China Vol. 28, pp. 1200-1215 SCIE https://doi.org/10.1016/S1003-6326(18)64758-2 ELSEVIER 2018
2018 32. Microstructure, mechanical properties and fracture behavior of in-situ Al-5Mg-Al4Sr composites P. Biswas, A. Biswas, R. Bhandari,  and M. K. Mondal Materials Today Communications Vol.15, pp. 190–198 SCIE https://doi.org/10.1016/j.mtcomm.2018.03.011 ELSEVIER 2018
2018 33. Effect of microstructural morphology on microscale deformation behaviour of Al-4.5Cu-2Mg alloy P. Biswas, R. Bhandari, M. K. Mondal and D. Mandal Archives of Metallurgy and Materials vol. 63(4), pp. 1575-1586 SCIE 10.24425/amm.2018.125080 Institute of Metallurgy and Materials Science of Polish Academy of Sciences, Commitee on Metallurgy of Polish Academy of Sciences 2018
2017 34. Modelling of flow behaviour in a LD vessel by an impinging gas jet M. K.  Mondal, P. Das, N. Karmakar and N. Banik Progress in Computational Fluid Dynamics Vol.17 (3), pp.159 – 171 SCIE https://doi.org/10.1504/PCFD.2017.084347 Inderscience Enterprises Ltd 2017
2017 35. Microstructural evolution and hardness property of in situ Al–Mg2Si composites using one-step gravity casting method P. Biswas , M. K. Mondal, H. Roy and  D. Mandal, Canadian Metallurgical Quarterly Vol. 56 (3),  pp 340–348 SCI 10.1080/00084433.2017.1345058 TAYLOR & FRANCIS LTD 2017
2016 36.  A Transient Heat Transfer Model for Assessment of Flash Temperature During Dry Sliding Wear in a Pin-on-Disk Tribometer M. K. Mondal, K. Biswas, and J. Maity Metallurgical and Materials Transactions A ol. 47A, pp. 600-607. SCI https://doi.org/10.1007/s11661-015-3224-6 Springer US 2016
2016 37.  Dry sliding wear behaviour of a novel 6351 Al-Al4SiC4 composite at high loads M. K.  Mondal, K. Biswas, and J. Maity Canadian Metallurgical Quarterly Vol. 55(1), pp. 75-93 SCI 10.1080/00084433.2015.1110664 TAYLOR & FRANCIS LTD 2016
2015 38.  Dry Sliding Wear Behavior of a Novel 6351 Al-Al4SiC4 Composite M. K.  Mondal, K. Biswas, A. Saha and J. Maity, Journal of Materials Engineering and Performance Vol. 24 (2), pp. 759-770 SCIE https://doi.org/10.1007/s11665-014-1366-0 Springer US 2015
2015 39.  Study of Microstructure Evolution during Semi-Solid Processing of an in-Situ Al Alloy Composite S. Kumar, P. Das, S. K. Tiwari, M. K. Mondal, S. Bera, H. Roy  and S. K. Samanta Materials and Manufacturing Processes Vol. 30(3), pp. 356-366 SCIE https://doi.org/10.1080/10426914.2014.952040 Taylor & Francis Inc 2015
2014 40. A Pure Implicit Finite Difference-Based Modeling Approach for Prediction of the Hardenability of Eutectoid Steel M. K. Singh, M. K. Mondal, Alok Mishra and J. Maity, Metallography, Microstructure and Analysis Vol. 3 (5), pp.368–376 SCOPUS https://doi.org/10.1007/s13632-014-0162-4 Springer US 2014
2014 41.  Electrical conductivity of a novel cast 6351 Al-Al4SiC4 in situ composite M. K. Mondal, K. Biswas and J.  Maity Journal of Materials Science Vol. 49 (7),  pp 2894-2903 SCI https://doi.org/10.1007/s10853-013-7997-y Springer US 2014
2013 42. Development of a novel cast 6351 Al-Al4SiC4 insitu composite   M. K. Mondal, K. Biswas and J.  Maity Journal of Materials Engineering and Performance Vol. 22(11), pp. 3364-3375 SCIE https://doi.org/10.1007/s11665-013-0654-4 Springer US 2013
2013 43. Microstructural characterisation of a novel 6351 Al-Al4SiC4 in-situ composite M. K. Mondal, K. Biswas and J.  Maity Materials Science and Technology Vol. 29(11),  pp 1394-1402 SCI 10.1179/1743284713Y.0000000273 TAYLOR & FRANCIS LTD 2013
2012 44. Study of Fluid Flow and Mixing Behaviour of a Vacuum Degasser M. K. Mondal, N. Maruoka, S. Kitamura, G. S. Gupta, Transactions of the Indian Institute of Metals Vol. 65 (3), pp. 321-331 SCIE https://doi.org/10.1007/s12666-012-0136-7 Springer-Verlag 2012
2010 45.  Enhancement in bath mixing and plume area in a new degassing process – A computational Fluid dynamic Study M. K. Mondal,  N. Maruoka, S. Kitamura and G.S. Gupta, Archives of Metallurgy and Materials vol. 55 (4),  pp. 1131-1135. SCIE 10.2478/v10172-010-0016-2 Institute of Metallurgy and Materials Science of Polish Academy of Sciences, Commitee on Metallurgy of Polish Academy of Sciences 2010
2009 46.  Computational fluid dynamics study of new vacuum degassing process M. K. Mondal, G.S. Gupta, S. Kitamura and N. Maruoka Chemical Product and Process Modeling vol. 4(3), article 4 SCOPUS https://doi.org/10.2202/1934-2659.1389 De Gruyter 2009

Conferences

ID Details Year
2022 1.S. Sarkar, M. K. Mondal and M. Mallik, “Correlation between pressureless sintering, microstructure and properties of ZrB2-SiC-Y2O3 composites” 4th International Conference on Processing and Characterization of Materials (ICPCM 2022), December 09 – 11, 2022. 2022
2022 2.M. Mallik,  S. Sarkar and M. K. Mondal, “Influence of Y2O3 content on Mechanical Properties of ZrB2-20 vol.% SiC Composites” 4th Structural Integrity Conference and Exhibition (SICE 2022), December 14 – 16, 2022 2022
2022 3.A. Pal, R. Bhandari, P. Biswas and M. K. Mondal, “Micromechanics and Failure Analysis of Al-17.6Si-Bi Alloy through Finite Element Techniques” Symposium on Failure and Preventive Maintenance of Machineries (FPMM-2022), March 08-09, 2022 2022
2022 4.R. Bhandari, P. Biswas, M. Mallik and M. K. Mondal, “Dry Sliding Wear Behavior of Hypereutectic Al-Mg2Si Composite” Symposium on Failure and Preventive Maintenance of Machineries (FPMM-2022), March 08-09, 2022. 2022
2022 5.S. Sarkar, M. K. Mondal, and M.Mallik, “Synthesis and characterization of ZrB2-SiC composite powder”  Materials Today: Proceedings, Vol.67, 2022, pp. 320-325,DOI: https://doi.org/10.1016/j.matpr.2022.07.164. 2022
2022 6.A. Maity, B. B. Buragohain, P. Biswas, R. Bhandari, A. Pal, and M. K. Mondal, “Effect of Mn addition on the micromechanical response and failure of Al-12.6Si alloy using actual microstructure based RVE model” Materials Today: Proceedings, Vol. 66, 2022, pp. 3790-3798, DOI: https://doi.org/10.1016/j.matpr.2022.06.128. 2022
2022 7.R. Bhandari, P. Biswas, M. Mallik, M. K. Mondal, “Effect of Rare Earth materials addition on the microstructural features and mechanical properties of Al-Mg2Si Composites- A review” National Conference cum Industry Meet on Foundry 4.0 – Opportunities and Challenges – 2022, February 24-25, 2022, CSIR-CMERI Durgapur. 2022
2022 8.B. B.Buragohain, R. Bhandaria, M. K. Mondal "Effect of squeeze cast on Aluminium alloy with or without Reinforcement Addition and its Optimization – A Review." National Conference cum Industry Meet on Foundry 4.0 – Opportunities and Challenges – 2022, February 24-25, 2022, CSIR-CMERI Durgapur. 2022
2019 9.R. Bhandari, M. Mallik and M. K. Mondal, “Microstructure evolution and mechanical properties of In Situ hypereutectic Al-Mg2Si composites, https://doi.org/10.1063/1.5130355. AIP Conference Proceedings 2162, 020145 2019
2019 10.T. R. Paul, M. K. Mondal  and M. Mallik, “Oxidation behaviour of spark plasma sintered ZrB2-MoSi2-SiCw based ultra-high temperature Ceramic composites” International Conference on Advanced Materials and Processes for Defence Applications (ADMAT- 2019), September 23-25, 2019 2019
2018 11.R. Das, M. K. Mondal and S. Pramanik, Feasibility study of rolling of reduced iron ore, graphite, fly ash and flu dust composite briquette  National Metallurgist Day-Annual Technical Meeting on November 2018 (NMD ATM 2018) 2018
2018 12.P. Biswas, S. Patra and M. K. Mondal, Effects of Mn addition on microstructure and hardness of Al-12.6Si alloy   IOP Conf. Series: Materials Science and Engineering 338, 012043 doi:10.1088/1757-899X/338/1/012043 2018
2018 13.T. R. Paul, M. K. Mondal and M. Mallik, Dry sliding wear response of ZrB2-20 vol% MoSi2 composite  Materials Today: Proceedings, Vol. 5 (2), PP 7174-7183. 2018
2018 14.R. Das, M. K. Mondal and S. Pramanik, Reducibility and strength of cold bonded composite briquette made with iron ore, blast furnace flue dust, carbon fines and fly ash as a binder   National Metallurgist Day-Annual Technical Meeting on November 2018 (NMD ATM 2018) 2018
2018 15.K. Durgaprasadu, P. Biswas and M. K. Mondal, Study the effects of Bi addition on microstructure and hardness of hypereutectic Al-17.6Si Alloy  National Conference on Advanced Materials, Manufacturing and Metrology (NCAMMM –2018), February 16 - 17, 2018, CSIR-CMERI Durgapur. 2018
2018 16.S. Gupta, P. Biswas, M.K. Mondal, R. Bhandari, S. Pramanik’ The effect of Al-5Ti-1B master alloy addition on the microstructure, hardness and mechanical properties of hypoeutectic Al-7.6Si alloy National Conference on Advanced Materials, Manufacturing and Metrology (NCAMMM –2018), February 16 - 17, 2018, CSIR-CMERI Durgapur. 2018
2018 17.M. Karbowniczek, P. Migas, M. K. Mondal, L. Banasik, E. S.  and G. S. Gupta, The solid fine precipitates behaviour in FeSiCr solution during ladle rafination 27th International Conference on Metallurgy and Materials (METAL 2018),Hotel Voronez I, Brno, Czech Republic, EU, pp 615 2018
2017 18.M. Saha, S. Kishore, P. Biswas, S. Patra and M. K. Mondal, Study the Effects of Zr Addition on the Hypoeutectic AI-7.6 Si Alloy National Conference on Advanced Functional Materials Processing & Manufacturing (NCAFMPM-2017), CSIR-CMERI Durgapur 2017
2017 19.S. Patra, P. Biswas and M. K. Mondal, Effect of Zr addition on microstructure, hardness, mechanical properties and fracture behaviour of Al-12.4Si Alloy  International conference on sustainable, manufacturing, Automation and Robotics Technologies (IC-SMART-2017), December 15-16, 2017, CSIR-CMERI Durgapur 2017
2017 20.T. R. Paul, M. K. Mondal and M. Mallik, Densification, microstructure and mechanical properties of ZrB2-20MoSi2-20SiCw ultra high temperature ceramic  National Metallurgist Day-Annual Technical Meeting on November 2017 (NMD ATM 2017) 2017
2017 21.P. Biswas, M. K. Mondal and D. Mandal, Effects of K2ZrF6 and KBF4 Combine Addition on Microstructure and Hardness of Al-15Mg2Si-5Si In-situ Composite  National Metallurgist Day-Annual Technical Meeting on November 2017 (NMD ATM 2017). 2017
2017 22.S. Patra, P. Biswas, and M. K. Mondal, Study the Effects of Al-5 Ti-1B Master Alloy Addition in Al-12.4 Si Alloy National Conference on Advanced Functional Materials Processing & Manufacturing (NCAFMPM-2017), CSIR-CMERI Durgapur 2017
2017 23.S. Maji, P. Biswas, S. Gupta, M. K. Mondal and S. Pramanik, Effect of Al-5Ti-1B grain refiner addition on wear behaviour of hypoeutectic (Al-7.6Si) alloy National Metallurgist Day-Annual Technical Meeting on November 2017 (NMD ATM 2017). 2017
2017 24.R. Bhandari, P. Biswas and M.K.Mondal, Microscale deformation behavior of hypoeutectic, eutectic and hypereutectic Al-Si alloy  National Metallurgist Day-Annual Technical Meeting on November 2017 (NMD ATM 2017) 2017
2017 25.S. Das, P. Biswas and M. K. Mondal, Effect of Zr addition on wear behaviour of hypoeutectic Al-7.6Si alloy  National Metallurgist Day-Annual Technical Meeting on November 2017 (NMD ATM 2017). 2017
2017 26.D. P. Kona,  P. Biswas and M. K. Mondal, Microstructure Evaluation and Hardness of Hypereutectic Al-17.6 Si Alloy with and without Bismuth (Bi) Addition  National Metallurgist Day-Annual Technical Meeting on November 2017 (NMD ATM 2017) 2017
2016 27.P. Biswas, M. K. Mondal and D. Mandal, Effects of extra Si content on the microstructure and mechanical properties of In-situ Al-15Mg2Si composite 70th  Annual Technical Meeting of Indian Institute of Metals at Kanpur (NMD-ATM 20016) 2016
2016 28.P. Biswas, M. K. Mondal and D. Mandal, Microstructural evolution of In-situ Al-Mg2Si composites  International Conference on Metals and Materials Research 2016 (ICMR 2016) on 20-22 June 2016, Indian Institute of Science, Bangalore, India. 2016
2016 29.P. Biswas, A. Biswas, R. Bhandari and M. K. Mondal, Microstructure, mechanical properties and hardness of Al-5Mg alloy containing Al4Sr reinforced phase Advances in Materials & Materials Processing (ICAMMP-IV), IIT Kharagpur 2016
2016 30.T. R. Paul, M. K. Mondal and M. Mallik, Optimization of wear parameters on tribological performance of ZrB2-20 vol% MoSi2 composite using grey-fuzzy algorithm  National Metallurgist Day-Annual Technical Meeting on November 2016, IIT Kanpur, India. 2016
2016 31.S. Patra, P. Biswas and M. K. Mondal, Evaluation of microstructure hardness and mechanical properties of hypoeutectic, eutectic and hypereutectic Al-Si alloys  The 4th International Conference on Advances  in Materials & Materials Processing (ICAMMP-IV), IIT Kharagpur 2016
2016 32. Bhandari, P. Biswas,  M. K. Mondal and  D. Mandal, “Deformation behavior of Al-Cu-Mg alloys actual RVEs at microlevel” The 4th International Conference on Advances in Materials & Materials Processing (ICAMMP-IV), IIT Kharagpur 2016
2016 33.T. R. Paul, M. K. Mondal and M. Mallik, Microstructure, mechanical properties and oxidation behavior of ZrB2 -20 vol. % MoSi2 composite MRSI North East Symposium on Advanced Materials for Sustainable Applications on February Jorhat, India. 2016
2016 34.T. R. Paul, M. K. Mondal and M. Mallik, Effect of particle size variation on densification and mechanical properties of ZrB2-SiC composites  MRSI North East Symposium on Advanced Materials for Sustainable Applications in February 2016, Jorhat, India. 2016
2014 35.P. Das, A. Maiti , M. K. Mondal , T. Ray, S. K. Samanta, Semi-Solid Processing of In-situ Al-15Mg2Si-Si Composite for Automotive application 68rd Annual Technical Meeting of Indian Institute of Metals (NMD-ATM 2014) 2014
2009 36.M. K. Mondal, G.S. Gupta, S. Kitamura and N. Maruoka, Computational study of vacuum degassing processes 63rd Annual Technical Meeting of Indian Institute of Metals at Kolkata (NMD-ATM 2009), 2009

Books

ID Title

Patents

ID Details Patent Filed Year
Awards and Recognitions

All India rank 18th in Graduate Aptitude Test in Engineering (GATE) in 2005

Administrative Responsibilities

1. Chief Warden since 30th August 2021. 

2. Warden HALL-XI from 15th March 2016 to 08th September 2021.

3. PG Coordinator, MME Department from 21st August 2017 to 7th September 2021.

4. Lab in charge, Mathematical Modeling and Simulation Laboratory (2010-2017).

5. Lab in charge, Thermodynamic of Materials Laboratory Since 2015.

6. Lab in Charge, Transport Phenomena Laboratory (MMS451) since 2019.

7.Programme officer (part-time), National service Scheme (NSS) (2009-2013).

 

Contact

Mobile : +91-9434789016
Email : manaskumar.mondal@mme.nitdgp.ac.in, manas.nitdgp@gmail.com

Academic Identity

Orcid Id
0000-0003-1647-8693
Scopus Id
Researcher Id
Google Scholar Id