1. Multi-variable
Optimization Formulation for Maximum Power Transmission Capability of a
Standalone Six-phase Induction Generator Saikat Ghosh and S N Mahato Distributed
Generation & Alternative Energy Journal
SCOPUS
2022
2022
2. A
New and Simple Mathematical Technique to Study the Steady-state Performance of
Isolated Asynchronous Generator H. S. Chatterjee and S. N. Mahato Distributed
Generation & Alternative Energy Journal
SCOPUS
2022
2022
3. BSA Based Analysis of Three-Phase Standalone Asynchronous Generator Using
Two-Port Network S. Ray, H. S. Chatterjee, D. Samajpati, S. N. Mahato, and N. K. Roy International Journal of Power Electronics
SCOPUS
2022
2021
4. Analysis of a Novel Three-phase Asynchronous Generator Based on Graph
Theory for Supplying Single-Phase Load S. Ray, H. S. Chatterjee, S. N. Mahato, and N. K. Roy IETE Journal of Research
SCI
2021
2020
5. Modeling
and Analysis of Multiphase Induction Generator used in AC & DC Hybrid Micro
Grid Generating System Saikat Ghosh, S. N. Mahato Journal
of the Indian Chemical Society
ESCI
2020
2019
6. Effect of Un-inhibited Synthetic Ester oil Based High Permittivity CaCu3Ti4O12 (CCTO) Nanofluids for Power Transformer Application R. T. Arun Ram Prasath, Nandini E. Hudedmani, Nirmal Kumar Roy, Sankar Narayan Mahato and P. Thomas IET Science, Measurement and Technology
VOL. 13, NO. 4, pp. 486-490.
SCI
IET
2019
2019
7. Synthetic Ester Oil Based High Permittivity CaCu3Ti4O12 (CCTO) Nanofluids for Power Transformer Application P. Thomas, Nandini E. Hudedmani, R.T. Arun Ram Prasath, Nirmal Kumar Roy, Sankar Narayan Mahato IEEE Transactions on Dielectrics and Electrical Insulation
Vol. 26, Issue 01, pp. 314-321
SCI
IEEE
2019
2017
8. High Accuracy Displacement Measuring System Using Strain gauge based
Displacement Sensor and Direct Sequence spread spectrum techniques in data
acquisition system K. Chatterjee, S. N. Mahato, S. Chattopadhyay, D. De International Journal of Instruments
and Experimental Techniques (IET)
SCI
2017
2017
9. Mineral oil based high permittivity CaCu3Ti4O12 (CCTO) nanofluids for power transformer application R. T. Arun Ram Prasath, Nirmal Kumar Roy, Sankar Narayan Mahato and P. Thomas IEEE Transactions on Dielectrics and Electrical Insulation
Volume: 24, Issue: 4, pp 2344 – 2353
SCI
IEEE
2017
2016
10. Measurement and Control of Coal Pipe Temperature of Coal Mills of PF
Boiler K. Chatterjee, S. N. Mahato, S. Chattopadhyay International Journal of Engineering and Technology (IJET)
Volume: 8, No:4, Page(s) 1666-1670
SCOPUS
2016
2014
11. Genetic algorithm
based performance analysis of 3-phase self-excited induction generator S. Ray, S. N. Mahato, and N. K. Roy International Journal
of Emerging Technology and Advanced Engineering
Others
2014
2014
12. High accuracy mass measuring system using capacitive mass sensor Karunamoy Chatterjee, S. N. Mahato and S. Chattopadhyay Instruments and Experimental Techniques
Volume 57, Issue 5, pp 627-630
SCI
Springer
2014
2013
13. Dynamic behavior of a single-phase self-excited induction generator using a three-phase machine feeding single-phase dynamic load S. N. Mahato, S. P. Singh and M. P. Sharma International Journal of Electrical Power and Energy Systems
Vol. 47, pp. 1-12
SCI
Elsevier
2013
2012
14. Weighing
System by Load Cell Response Rectification Method Karunamoy Chatterjee, S. N. Mahato and S. Chattopadhyay International
Journal of Measurement Technologies and Instrumentation Engineering (IJMTIE)
Volume 2, Issue 3, pp. 34-44
SCI/SCOPUS
DOI: 10.4018/ijmtie.2012070104
2012
2008
15. Excitation capacitance required for a self-excited single-phase induction generator using a three-phase machine S. N. Mahato, S. P. Singh and M. P. Sharma International Journal of Energy Conversion and Management
Vol. 49, Issue 5, pp. 1126-1133
SCI
Elsevier
2008
2008
16. Capacitors required for maximum power of a self-excited single-phase induction generator using a three-phase machine S. N. Mahato, S. P. Singh and M. P. Sharma IEEE Trans. on Energy Conversion
Vol. 23, No. 2, pp. 372-381
SCI
IEEE
2008
2007
17. Selection of optimal capacitors for maximum power output of a single-phase self-excited induction generator using a three-phase machine S. N. Mahato, M. P. Sharma and S. P. Singh Electric Power Components and Systems
Vol. 35, No. 8, pp. 857-870
SCI
Taylor & Francis
2007
2007
18. Steady-state and dynamic behavior of a single-phase self-excited induction generator using a three-phase machine S. N. Mahato, M. P. Sharma and S. P. Singh International Journal of Emerging Electric Power Systems
Vol. 8, Issue 3, Article 5
SCOPUS
De Gruyter
2007
2007
19. Transient performance of a single-phase self-regulated self-excited induction generator using a three-phase machine S. N. Mahato, M. P. Sharma and S. P. Singh Electric Power Systems Research
Vol. 77, pp. 839-850
SCI
Elsevier
2007
Conferences
ID
Details
Year
2020
1.S. Ghosh and S.N. Mahato,
“Modeling and Control Topology of Multiphase Induction Generator for supplying AC & DC power Simultaneously”
Power Electronics And Renewable Energy System Control (PERESC -2020) 4-5 December 2020, IIT
Bhubaneswar, India.
2020
2020
2.Saikat Ghosh and S N
Mahato, “Modeling and analysis of multiphase induction generator used in AC and
DC hybrid micro grid generating system”,
WEES
2020, 13-15 January 2020, National Institute of Technology Durgapur, India.
2020
2020
3.H.S.Chatterjee and
S.N.Mahato, “Power Converter Topologies for Feeding DC Loads from Standalone
Asynchronous Generator”,
International
Conference on Water, Energy and Environmental Sustainability 2020 (WEES 2020),
13-15 January,2020, NIT Durgapur, India.
2020
2020
4.H.S.Chatterjee,
D.Samajpati, S.Ray and S.N.Mahato, “An Efficient Algorithm For Performance
Analysis Of Isolated Asynchronous Generator”,
IEEE
International conference on Power Electronics, Smart Grid and Renewable Energy
(PESGRE) 2020, 2-4 January, 2020, Kerala, India.
2020
2019
5.H.S.Chatterjee and
S.N.Mahato, “Neural Network Based Analysis Of Isolated Asynchronous Generator”,
IEEE
International Transportation Electrification Conference ( ITEC ) 2019, December
17-19, 2019, Bengaluru, India.
2019
2019
6.H.S.Chatterjee,
D.Samajpati, S.Ray and S.N.Mahato, “DSA based Analysis for Capacitor
Requirement of a Three-Phase Standalone Asynchronous Generator”,
International
Conference on Emerging Trends in Smart Grid Application and Industry 4.0-2019,
BIT Mesra, December 5-7, 2019.
2019
2019
7.S. Ray, H. S. Chatterjee,
D. Samajpati, S. N. Mahato and N. K. Roy, “Two-Port Network Based Modeling and
Analysis of Three-phase Self-Excited Induction Generator Used in Renewable
Energy Systems”,
International Conference on
Emerging Trends in Smart Grid Application and Industry 4.0 – 2019, BIT Mesra, December
5 – 7, 2019.
2019
2019
8.S. Karmakar and S. N.
Mahato, “Artificial Neural Network-Based Electronic Load Controller for
Self-Excited Induction Generator”,
Proceedings of
International Conference on Impact of Changing Energy Mix in the Power Sector,
November 23-24, 2019, Kolkata, India.
2019
2019
9.Biswajit Saha and S. N.
Mahato, "Power Quality Improvement of a Self-Excited Induction Generator
Using NFPI Controller-Based Hybrid STATCOM System,"
2019
IEEE International Conference on Intelligent Techniques in Control,
Optimization and Signal Processing (INCOS), Tamilnadu, India, April 11-13, 2019,
pp. 1-4.
2019
2017
10.R.T. Arun Ram Prasath,
Sankar Narayan Mahato, Nirmal Kumar Roy and P. Thomas, “Dielectric and Thermal
Conductivity Studies on Synthetic Ester Oil Based TiO2 Nanofluids”,
IEEE International
Conference on Condition Assessment Techniques in Electrical Systems (CATCON
2017), IIT Ropar, November 16-18, 2017.
2017
2016
11.Nirmal K. Roy, Arun R. P.
Ramaiyapillai Thirugnanam, Sankar N. Mahato and Thomas Paramanandam,
“Accelerated Thermal Ageing Studies on Natural Ester Oil using High Dielectric
CaCu3Ti4O12 (CCTO) Nanofluids”,
2016
European Advanced Material Congress, Sweden, (22-24) August, pp.1-6.
2016
2016
12.R.T. Arun Ram Prasath,
Nirmal Kumar Roy, Sankar Narayan Mahato, “Degradation Studies on Solid
Insulation Using Mineral Oil Based TiO2 Nanofluids”,
18th
Asian Conference on Electrical Discharge, IIT Madras (Dec 8-10), pp. 1-4, 2016.
2016
2016
13.D. Samajpati,
S.N. Mahato and H.S. Chatterjee, “Selection of excitation capacitance for three
phase self-excited induction generator using graph theory and differential
evolution",
IEEE11th International Conference on Industrial
and Information Systems (ICIIS), vol. 11, pp. 166-171, December,
2016, IIT Roorkee, India.
2016
2016
14.Dipanjan
Samajpati and Sankar Narayan Mahato, “Graph theory based performance analysis
of three-phase self-excited induction generator using differential evolution,”
IEEE International Conference on Electrical Power
and Energy Systems (ICEPES), vol. 2, pp. 519-526, December, 2016, MANIT
Bhopal, India.
2016
2016
15.Pratyush
Prasanna Das and S. N. Mahato, “Design
Optimization of a Six-Phase Induction Motor by Flower pollination and Modified
Artificial Bee colony Algorithms”,
IEEE
International Conference TENCON 2016, Singapore, pp
3313-3317, November 22-25, 2016.
2016
2016
16.Pratyush
Prasanna Das and S. N. Mahato, “Artificial
Bee Colony Based Design Optimization of a Six-Phase Induction Motor”,
2nd IEEE International
Conference on Control, Instrumentation, Energy & Communication (CIEC 2016),
pp 526-530, January 28-30, 2016, Kolkata, India.
2016
2016
17.H. S. Chatterjee and S. N.
Mahato, “Calculation of Minimum Capacitance of Isolated Three Phase Induction
Generator Using Adaptive PSO Technique”,
IEEE
International Conference on Microelectronics, Communication & Computing
(MicroCom 2016), January 23 – 25, 2016, NIT Durgapur, India.
2016
2016
18.Sourav Bhattacharyya, Karunamoy
Chatterjee and Sankar Narayan Mahato, “A
dynamic range differential capacitive sensor interface circuit with noise
shaping model of sigma-delta modulator”,
IEEE
International Conference on Signal Processing, Communication, Power and
Embedded System, pp 1280-1283, October, 2016.
2016
2015
19.Arun
Ram PrasathR T,P.Thomas, Ann PamlaCruze, S. N. Mahato, N. K. Roy, “Ageing
Analysis of Mineral Insulating Oils Using CCTO Nanofluids”,
International Conference on
Energy, Power and Environment (ICEPE 2015), NIT Maghalaya, June 12-13, 2015.
2015
2015
20.H. S. Chatterjee and S. N.
Mahato, “Steady State Analysis of Isolated Three-Phase Induction Generator
Using Adaptive PSO Technique”,
IEEE
International Conference INDICON 2015, December 17 – 20, 2015, New Delhi,
India.
2015
2015
21.Karunamoy Chatterjee, Subrata Chattopadhyay, Sankar Narayan
Mahato and Dhananjoy De, “Accuracy
Enhancement of Reluctance type Pressure Transducer”,
Proceedings of the IEEE International Conference on
Communication Control & Intelligent Systems (CCIS), Page(s) 330 – 333, November
7-8, 2015, Mathura, UP, India.
2015
2015
22.Karunamoy Chatterjee,
Sankar Narayan Mahato, Sourav Bhattacharyya and Dhananjoy De, “An interfacing
circuit for differential capacitive sensor and its performance analysis”,
IEEE International Conference
on Energy, Power and Environment. Page(s) 1 – 3, 2015, NIT Meghalaya.
2015
2015
23.Karunamoy
Chatterjee, Subrato Chattopadhyay, Sankar Narayan Mahato and Dhananjoy De, “A
Simple Multi Parameter Measurement System using Multi Transducer”,
International
Conference on Energy, Power and Environment (ICEPE 2015), NIT Maghalaya, June 12-13,
2015.
2015
2015
24.Karunamoy
Chatterjee; Sankar Narayan Mahato; Subrato Chattopadhyay; Dhananjoy De, “Mass
Measuring System Using Direct Sequence Spread Spectrum (DSSS with chaotic
spreading codes) Technique”,
IEEE
International Conference on Electrical, Electronics, Signals, Communication
& Optimization-EESCO, Visakhapatnam,
Andhra Pradesh, India, 24th - 25th January,2015.
2015
2014
25.S.
Ray, S. N. Mahato and N. K. Roy, “Genetic algorithm based performance analysis
of 3-phase self-excited induction generator”,
International
Conference on Industrial Engineering Science and Application (IESA 2014), Department
of Electrical Engineering, National Institute of Technology, Durgapur. 2ndto 4th
April 2014.
2014
2014
26.K.
Chatterjee, S. N. Mahato, S. Chattopadhyay, D. De, “Mass Measuring System Using
Delay-and-Add Direct Sequence (DADS) Spread Spectrum Method”,
International
Conference on Industrial Engineering Science and Application (IESA 2014), Department
of Electrical Engineering, National Institute of Technology, Durgapur. 2ndto 4th
April 2014.
2014
2014
27.K. Chatterjee,
S. N. Mahato, S. Chattopadhyay, M. sarkar, “Equalization in
Optical Communication by
Fractionally Spaced Decision Feedback
Equalizer(FSDFE)”,
NCMRA, BUIE
Bankura, West Bengal, 23rd to 25th January, 2014.
2014
2014
28.Pallav
Datta and Sankar Narayan Mahato, “Design of Mathematical Model and Performance
Analysis of BLBLDC Motor”,
International Conference on
Control, Instrumentation, Energy & Communication (CIEC14), Kolkata, India, January
31-Feb02, 2014.
2014
2014
29.Kaur
K., Saha Tapas Kumar, and Mahato S. N., Wind Speed Estimation Based Control of
Stand-Alone DOIG for Wind Energy Conversion System,
IEEE
International Conference on Industrial Technology (IEEE-ICIT) 2014, pp 462-467,
Busan, Korea, February 26 – March 01, 2014.
2014
2014
30.Dey Jayati, Saha Tapas Kumar, and Mahato S. N., Robust Voltage Regulation of DC-DC PWM Based
Buck-boost Converter,
IEEE International Conference on Industrial Technology
(IEEE-ICIT) 2014, pp 229-234, Busan, Korea, February
26 – March 01, 2014.
2014
2014
31.Sambaran
Ray, S. N. Mahato and N. K. Roy, “Performance Analysis of Isolated 3-phase Self
Excited Induction Generator using Graph Theory and PSO Technique”,
IEEE
International Conference TENCON 2014, Bangkok, Thailand, October
22-25, 2014.
2014
2013
32.K.
Chatterjee, S. N. Mahato, S. Chattopadhyay, “A Novel Approach for Enhancing
Accuracy in Weighing System Using a New Super regenerative Architecture in DSSS”,
Proceedings of the International Conference on Industrial
Electronics and Applications. Page(s)
11-16, January 27, 2013, Bhubaneswar, India.
2013
2011
33.S.
N. Mahato, S. P. Singh and M. P. Sharma “Indirect Vector Control of Stand-Alone
Self-Excited Induction Generator”
Proceedings
of the “International Conference on Scientific Computing
(CSC 2011)”, July 18-21, 2011, Las
Vegas Nevada, USA.
2011
2010
34.S.
N. Mahato, S. P. Singh and M. P. Sharma “Direct vector control of stand-alone
self-excited induction generator”
Proceedings of the “IEEE Joint International Conference
on Power Electronics, Drives and Energy Systems and 2010 Power India”, pp. 1-6, December
20-23, 2010, New Delhi, India.
2010
2010
35.S.
N. Mahato, S. P. Singh and M. P. Sharma “Transient Performance of a Three-Phase
Self-Excited Induction Generator Supplying Single-Phase Load with Electronic
Load Controller”
Proceedings
of the “IEEE International Conference on Electrical
Systems for AirCraft, Railway and Ship Propulsion,”, October 19-21, 2010, Bologna, Italy.
2010
2006
36.S.
N. Mahato, M. P. Sharma and S. P. Singh, “Determination of Minimum and Maximum
Capacitances of a Self-Regulated Self-Excited Induction Generator Using a
Three-Phase Winding”
Proceedings
of the IEEE International Conference “India International Conference on Power Electronics
(IICPE) 2006”,
pp. 28-33, December, 2006.
2006
2006
37.S.
N. Mahato, M. P. Sharma and S. P. Singh, “Analysis of Transient Behavior of a
Single-Phase Self-Regulated Self-Excited Induction Generator using a
Three-Phase Machine”
Proceedings of the “IEEE International Conference on
Industrial Technology (ICIT 2006)”, pp. 2709-2714, December 2006.
2006
2006
38.S.
N. Mahato, M. P. Sharma and S. P. Singh, “Transient analysis of a single-phase
self-excited induction generator using a three-phase machine feeding dynamic
load”
Proceedings of “IEEE International Conference on Power Electronics,
Drives and Energy Systems (PEDES 2006)”, pp. 1-6, December
2006.
2006
2005
39.S.
N. Mahato, M. P. Sharma and S. P. Singh, “Dynamic Behaviour of a Self-Excited
Self-Regulated Single Phase Induction Generator Using a Three Phase Machine”
Proceedings
of the International Conference “Computers
Applications in Electrical Engineering- Recent Advances (CERA – 05)”, pp. 520-527, 28th September to 1st October, 2005, I.I.T. Roorkee, India.
2005
2005
40.. S. N. Mahato, M. P. Sharma and S. P. Singh,
“Stand-Alone Hybrid Energy System for Isolated Power Supply”
“International Conference on Science & Technology for Sustainable
Development” held from 10th to 13th August, 2005 at
St. Berchmans College, Kerala,
India.
2005
Books
ID
Title
Patents
ID
Details
Patent Filed Year
Administrative Responsibilities
Sl. No.
Position held
From
To
1.
Head of the Department,
Department of Electrical Engineering
19.07.2021
Till date
2.
Associate Dean (Students' Welfare)
14.01.2013
16.09.2019
3.
Associate Dean (Faculty Welfare)
28.10.2019
31.01.2022
4.
Nodal Officer (EAP), TEQIP-II
April, 2011
March, 2017
5.
Nodal Officer (Academic), TEQIP-III
25.04.2018
30.09.2021
6.
Convenor, Institute Disciplinary Committee
18.12.2012
August 2015
7.
Convenor , Institute Scholarship Committee
17.01.2017
16.09.2019
8.
Convenor, Tender Committee for supply of raw food materials and cooked food to different hostels of NIT Durgapur
20.12.2012
20.11.2014
9.
Convener, ACoFAR
15.11.2019
31.01.2022
10.
Chairman, Tender Committee of Telephone Exchange, NIT Durgapur
November, 2016
Till date
11.
Departmental PG Coordinator
July, 2008
August, 2019
12.
Member, CARE, NIT Durgapur
December 7, 2018
Till date
13.
Member, Execution Committee for the Study in India Program
03.09.2020
31.01.2022
14.
Hostel Warden
14.08.2008
22.02.2013
15.
Member, Monitoring Cell on Ragging of the Institute
24.11.2014
28.07.2015
Contact
Mobile : +91-9434788057
Email : sankar.mahato@ee.nitdgp.ac.in
ERP
Faculty Recruitment @2024 
