M. E., Mechanical Engineering (Specialisation- Production) (1990-1992)
Jadavpur University, Kolkata, West Bengal, India
B. E. (Hons.), Mechanical Engineering (1986-1990)
National Institute of Technology, Durgapur (then R. E. College), West Bengal, India
Research Interest
Theory of Metal Cutting/ Machining Science,
Nonconventional Machining Processes,
Micromachining (Tool-based and nonconventional): Micro-ECM, Micro-EDM / Micro-WEDM, LBM etc.
Process Modelling and Optimisation
Projects
Title
Investigator
Co-investigator
Sponsered Agency
Duration
Status
1. Title of the Project: Development of a Wire-cut Electro-chemical Discharge machining (WECDM) System and conducting experimental investigations into the machining of non-conducting ceramics for better machining performances
Sponsoring Agency: R& D project (Vide letter no. F.26 – 1/ 2003.TS.V, dated, 31-03-2003, issued by the MHRD)
Amount: 14 Lakhs
Period: 2003-2006
2. Title of the Project: Investigation on Geometry and Size Effects in Micro EDM
Investigation on Machining Characteristics in Mechanical Micro milling of Amorphous Materials
Debajyoti Ray (2014- 2019)
Ph. D degree awarded (Completed)
Investigation on Machining Characteristics in Mechanical Micro milling of Amorphous Materials
Meghnath Sen
Institute Research Scholar
Meghnath Sen
Institute Research Scholar
Swapan Barman (2010- 2018)
Ph. D degree awarded (Completed)
Investigation on Geometry and Size Effects in Micro-EDM
Swapan Barman (2010- 2018)
Ph. D degree awarded (Completed)
Investigation on Geometry and Size Effects in Micro-EDM
Debashis Nandi (2008-2015)
Ph. D degree awarded (Completed)
A Predictive Model of Discharge Voltage for Electric Discharge Machining
Debashis Nandi (2008-2015)
Ph. D degree awarded (Completed)
A Predictive Model of Discharge Voltage for Electric Discharge Machining
R. V. Murali (2008-2012)
Ph. D degree awarded (Completed)
Modelling, Simulation and an Empirical Investigation of Worker Assignment for Virtual Cellular Manufacturing
R. V. Murali (2008-2012)
Ph. D degree awarded (Completed)
Modelling, Simulation and an Empirical Investigation of Worker Assignment for Virtual Cellular Manufacturing
Mithilesh Dikshit (2012-2016)
Ph. D degree awarded (Completed)
Modelling of Cutting Forces and Stability Analysis in High Speed Ball End Milling
Mithilesh Dikshit (2012-2016)
Ph. D degree awarded (Completed)
Modelling of Cutting Forces and Stability Analysis in High Speed Ball End Milling
Projects
Sl.No.
Title
Name of the PI
Name of the CoPIs
Funding Agency
Amount (Rs.)
Project Type
Project Status
Date of Initiation
Date of Completion
1
Development of a Wire-cut Electro-chemical Discharge machining (WECDM) System and conducting experimental investigations into the machining of non-conducting ceramics for better machining performances
Asit Baran Puri
R& D project (Vide letter no. F.26 – 1/ 2003.TS.V, dated, 31-03-2003, issued by the MHRD)
1,400,000
Sponsored
Completed
2003
2006
2
Investigation on Geometry and Size Effects in Micro EDM
Development of a Wire-cut Electro-chemical Discharge machining (WECDM) System and conducting experimental investigations into the machining of non-conducting ceramics for better machining performances
Asit Baran Puri
R& D project (Vide letter no. F.26 – 1/ 2003.TS.V, dated, 31-03-2003, issued by the MHRD)
1,400,000
Sponsored
Completed
2003
2006
2
Investigation on Geometry and Size Effects in Micro EDM
1. Mechanistic modelling
of dynamic cutting forces in micro end milling of Zr-based bulk metallic glass Debajyoti Ray, Asit Baran Puri, Naga Hanumaiah, Saurav Halder International Journal of Machining and Machinability of Materials
Vol. 22, No. 6, pp. 527–550
SCOPUS
2020
2020
2. Analysis on Specific Cutting Energy in Micro
Milling of Bulk Metallic Glass Debajyoti Ray, Asit Baran Puri, Naga Hanumaiah, Saurav Halder International Journal of Advanced Manufacturing
Technology
Volume 108, Combined 1-2,2020, pp. 245–261
SCIE
2020
2020
3. Experimental analysis on quality aspects of micro-channels in mechanical
micro milling of Zr-based bulk metallic glass Debajyoti Ray, Asit Baran Puri and Naga Hanumaiah Measurement
Vol. 158, No. 1, 2020, pp 107622/1-107622/14
SCIE
2020
2019
4. Modelling of top burr formation in micro-end milling of Zr-based bulk
metallic glass Debajyoti Ray, Asit Baran Puri, Naga Hanumaiah and Saurav Halder Journal of Micro and Nano-Manufacturing
Vol. 7 / 041004-1 to 12
SCOPUS
ASME
2019
2019
5. An experimental investigation on the formation
ofburrs in micro milling of Zr-based amorphous bulkmetallic glass Debajyoti Ray, Asit Baran Puri and Naga Hanumaiah International Journal of Materials and Product Technology
Vol. 59, No. 2 (2019) pp. 140 – 171
SCIE
2019
2019
6. Investigation on Cutting Forces and Surface
Finish in Mechanical Micro Milling of Zr-Based Bulk Metallic Glass Debajyoti Ray, Asit Baran Puri, and Naga Hanumaiah Journal of Advanced Manufacturing Systems
Vol. 18, No. 1 (2019), pp 113–132
SCOPUS
2019
2017
7. Analysis of Surface
Texture of High Aspect Ratio Blind Micro Holes on Titanium Alloy (Ti-6Al-4V) in
Micro Electrical Discharge Drilling Swapan Barman, Asit Baran Puri and Nagahanumaiah
Solid State Phenomena
Vol. 261, pp 151-158
Others
2017
2017
8. Modelling and
Application of Response Surface Optimization to Optimize Cutting Parameters for
Minimizing Cutting Forces and Surface Roughness in High Speed Ball End Milling
of Al2014-T6 Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity Journal of the
Brazilian Society of Mechanical Sciences and Engineering
vol 39, no. 12, December 2017, pp. 5117-5133
SCIE
10.1007/s40430-017-0865-y
2017
2017
9. Analysis of Surface
Texture of Bulk Metallic Glass in Micro Electrical Discharge Drilling Barman, S., Sharma, R. P. and Puri, A. B. Int. J. Machining and Machinability of Materials
vol.19, no. 3, 2017, pp. 193-217
SCOPUS
2017
2017
10. Analysis of Cutting Force Coefficients in High
Speed Ball End Milling at Varying Rotational Speeds Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity Machining Science and
Technology
SCIE
http://dx.doi.org/10.1080/10910344.2017.1284562
Taylor & Francis
2017
2017
11. Analysis of
Rotational Speed Variations on Cutting Force Coefficients in High Speed Ball
End Milling Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity Journal of the
Brazilian Society of Mechanical Sciences and Engineering
Vol. 39, No. 9, 2017, pp 3529-3539
SCIE
10.1007/s40430-016-0673-9
2017
2017
12. Chatter and Dynamic
Cutting Force Prediction in High Speed Ball End Milling Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity Machining Science and
Technology
Vol. 21, No. 2, 2017, pp. 291-312
SCIE
10.1080/10910344.2017.1284560
2017
2017
13. Optimization of
surface roughness in ball end milling using teaching learning based
optimization (TLBO) and RSM Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity Proc IMechE Part B: J
Engineering Manufacture
Vol. 231(14), pp. 2596–2607
SCIE
2017
2016
14. A Study on Tooling
and Its Effect on Heat Generation and Mechanical Properties of Welded Joints in
Friction Stir Welding Sujoy Tikader, Pankaj Biswas, Asit Baran Puri
J. Inst. Eng. India Ser. C
SCOPUS
DOI 10.1007/s40032-016-0325-y
Springer
2016
2016
15. Empirical Modelling
of Dynamic Forces and Parameter Optimization using Teaching-Learning-Based
Optimization Algorithm and RSM in High Speed Ball-End Milling Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity Journal
of Production Engineering
Vol.19 (1), pp 11-21
Others
2016
2016
16. Determining Cutting
Force Coefficients from Instantaneous Cutting Forces in Ball End Milling Mithilesh K. Dikshit, Asit Baran Puri, Atanu Maity, Amit Jyoti Banarjee Int. J. Machining and Machinability of Materials
Vol. 18, Nos. 5/6, 2016, pp 552-571
SCOPUS
2016
2015
17. Stability Lobe and Chatter Prediction in High-Speed Ball-End Milling M. K. Dikshit, A. B. Puri, A. Maity and A. J. Banarjee Journal of Machining and Forming Technology
Vol. 6, No. 3-4, pp 117-129
Others
2015
2015
18. Analysis of Surface
Roughness in High Speed Ball End Milling M. K. Dikshit, A. B. Puri, A. Maity and S. Y. Pujar Int Journal of
Manufacturing Science and Engineering
Vol. 6, No. 1, 2015, pp. 33-43
Web of Science
2015
2015
19. Analysis
of micro-electrical discharge drilling characteristics in a thin plate of
Ti–6Al–4V Koustov Mondol, M. S. Azad, A. B. Puri Int. Journal of Advanced
Manufacturing Technology
Vol. 76, Issue 1-4, 2015, pp. 141-150
SCIE
2015
2015
20. Investigation
on shape, size, surface quality and elemental characterization of
high-aspect-ratio blind micro holes in die-sinking micro EDM S. Barman, Naga Hanumaiah, A. B. Puri Int. Journal of Advanced
Manufacturing Technology
Vol. 76, Issue 1-4, 2015, pp. 115-126
SCIE
2015
2013
21. Multiple-response
optimisation of electrochemical grinding characteristics through response
surface methodology Asit Baran Puri and Simul Banerjee Int. Journal of Advanced
Manufacturing Technology
Vol. 64, Issue 5, 2013, pp. 715-725
SCIE
2013
2012
22. Simultaneous
optimisation of multiple performance characteristics in micro-EDM drilling of
titanium alloy M.S. Azad and
A.B. Puri Int. Journal of Advanced
Manufacturing Technology
Vol. 61, Issue 9, 2012, pp. 1231-1239.
SCIE
2012
2011
23. Behaviour of Bubbles
Generated in Electro-Chemical Discharge Machining Debasish Nandi, A. B. Puri, Indrajit Basak International Journal of Engineering Science and
Technology
Vol. 3, No.12, December 2011, pp. 8274-8280
Web of Science
2011
2010
24. ANN Worker assignment model with real time
industrial data R.V. Murali, A. B. Puri, Khalid F. Al-Raheem and G. Prabhakaran International Journal of Industrial Engineering
Practice
vol. 2, no. 2, pp. 41-47
Others
2010
2010
25. Artificial neural networks based predictive
model for worker assignment into virtual cells R. V. Murali, A. B. Puri, and G. Prabhakaran, International Journal
of Engineering Science and Technology
Vol. 2, No. 1, 2010, pp. 163-174
Others
2010
2009
26. Worker efficiency and job criticality
consideration in virtual cellular manufacturing environments R. V. Murali, G. Prabhakaran, A. B. Puri, and D. Ragavesh, Int. Journal of Advanced Operations Management
Nos. 2/3, Vol. 1, 2009, pp.203–223
Others
2009
2005
27. Modelling and Analysis of
White Layer Depth in Wire-cut EDM Process through Response Surface Methodology A. B. Puri and Prof. B. Bhattacharya Int. Journal of Advanced
Manufacturing Technology
Number 3-4, Vol 25, 2005, pp 301 – 307
SCIE
2005
2003
28. Modelling and Analysis of the
Wire Tool Vibration in Wire-cut EDM A. B. Puri and Prof. B. Bhattacharya Journal of Materials
Processing Technology
Vol 141, Issue 3 (2003), pp 295 – 301.
SCIE
2003
2003
29. An Analysis and
Optimisation of the Geometrical Inaccuracy due to Wire Lag Phenomenon in WEDM A. B. Puri and Prof. B. Bhattacharya Int. Journal for Machine Tools and Manufacture
Vol 43, Issue 2, 2003, pp 151-159
SCIE
2003
Conferences
ID
Details
Year
2019
1.Debajyoti Ray, A.B.
Puri, Nagahanumaiah and Saurav Halder: An Experimental Analysis on the
Formation of Top Burrs in Micro End Milling
Proc. of Int. Conf. on Mechanical and Production Engineering (ICMPE),
Kolkata, West Bengal, India, April 21, 2019, pp 4-10.
2019
2016
2.Debajyoti Ray, A.B.
Puri, Nagahanumaiah and S. Halder: Investigation on
Machining Characteristics in Mechanical Micro Milling of Amorphous Alloy
Proc. of 6th
International & 27th All India
Manufacturing Technology, Design and Research Conference (AIMTDR-2016), College of Engineering,
Pune, Maharashtra, INDIA, December 16-18, 2016.
pp1422-1426.
2016
2016
3.Mithilesh K Dikshit, P
Banerjee, Asit Baran Puri and A Maity: Analytical Prediction of Chatter Stability in
High Speed Ball End Milling Process
International
Conference on Recent Trends in Engineering & Technology (ICoRTET 2016) 3 -
5th October, 2016, CUSAT, Kochi,
Kerala, pp 76-81.
2016
2016
4.Mithilesh K. Dikshit, Asit Baran Puri, Atanu
Maity : Prediction of
Stability Lobe Diagram in High Speed Ball End Milling Using Inverse Method
Proc. of the International Conference
on Advances in Dynamics, Vibration and Control (ICADVC-2016), 25-27 February 2016, NIT
Durgapur.
2016
2015
5.Mithilesh Kumar Dikshit, Asit Baran Puri, Atanu Maity, Amit Jyoti
Banarjee: Surface Roughness Generation in High speed Ball End Milling of Aluminum
Alloy Al 2014-T6
Proc. of the
International Conference on Advances in Production and Industrial Engineering
2015 (INCAPE 2015), Dept. of Production Engineering, NIT Tiruchirappalli, 21-22
Feb, 2015. pp. 16-21. Paer ID: AA04
2015
2014
6.M. K.
Dikshit, A. B. Puri, A. Maity and A. J. Banarjee : Stability Lobe and Chatter Prediction in High Speed Ball End Milling
Proc. Of Int Conf on Industrial, Mechanical and Production Engineering:
Advancements and Current Trends (IC IMPACT 2014), Dept of Mechanical
Engineering, MANIT, Bhopal, M. P, India,Nov 27-20, 2014. pp. 159 - 164
2014
2014
7.Swapan
Barman and Asit Baran Puri : Measurement of Form and Areal Surface Texture of High Aspect Ratio Blind
Micro Hole Die Sinked in Micro EDM by Destructive Method
Proc. of the 3rd
National Conference on Advances in Metrology (AdMet-
2014), Thapar
University, Patiala, February 19 – 20, 2014. pp. 191-192
2014
2014
8.Sujoy Tikader, Pankaj Biswas and Asit Baran Puri : A Study on Tooling and Its Effect on Heat Generation and Mechanical Properties
of Welded Joints in Friction Stir Welding
Proc. of the 5th International and 26th
All India
Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT
Guwahati, December 12-14, 2014. pp 170-1 - 170-7
2014
2014
9.M. K.
Dikshit, A. B. Puri, A. Maity and A. J. Banarjee: Determining Cutting Force
Coefficients From Instantaneous Cutting Force In Ball-End Milling
Proc. of the 5th International and 26th
All India
Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT
Guwahati, December 12-14, 2014. pp74-1-74-7
2014
2014
10.Swapan Barman, Koustov Mondol, Nagahanumaiah and
Asit Baran Puri : Modeling and Optimization for Drilling of High Aspect Ratio Blind Micro
Holes in Micro EDM
Proc. of the 5th International and 26th
All India
Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT
Guwahati, December 12-14, 2014. pp. 809-1 – 809-7
2014
2014
11.M. K.
Dikshit, A. B. Puri, A. Maity and A. J. Banarjee : Analysis of Surface Roughness in High Speed Ball End Milling,
Int. Conf. on Advancements and Futuristic Trends in
Mechanical and Materials Engineering PTU, Kapurthala, Punjab, India,
October 16-18, 2014. pp. 81-86
2014
2014
12.M. K.
Dikshit, A. B. Puri, A. Maity and A.
J. Banarjee: Analysis of cutting forces and optimization of cutting parameters in high
speed ball-end milling using response surface methodology and genetic algorithm
International
Conference on Advances in Manufacturing and Materials Engineering, AMME 2014,
NIT-Surathakal, Karnatka, India, 27-29 of March 2014. Procedia Materials Science, ELSEVIER, vol 5, 2014, Pages 1623–1632.
2014
2014
13.M. K.
Dikshit, A. B. Puri, A. Maity and A.
J. Banarjee: Experimental study of cutting forces in ball end milling of Al2014-T6
using response surface methodology
Proc. of the 3rd International
Conference on Materials Processing and Characterization (ICMPC 2014), March
8-9, 2014, GRIET, Hyderabad.
Procedia Materials Science (ISSN 2211-
8128), Vol. 6, 2014, pp. 612-622
2014
2014
14.Swapan Barman, Vijay, Nagahanumaiah and Asit
Baran Puri: Surface Texture and
Elemental Characterization of High Aspect Ratio Blind Micro Holes on Different
Materials in Micro EDM
Proc. of the 3rd
International Conference on Materials Processing and Characterization (ICMPC
2014), March 8-9, 2014, GRIET, Hyderabad.
Paper ID 329. Procedia Materials Science
(ISSN 2211- 8128), Vol. 6, 2014, pp. 304-309
2014
2013
15.Swapan Barman, Nagahanumaiah and A.B. Puri : Form and Surface Texture Characterization of High Aspect Ratio Micro
Hole in Bulk Metallic Glass machined in Micro EDM Process
Proc. of the 8th International
Conference on Advances in Metrology (AdMet
2013), Feb 21-23 Feb, 2013, CSIR-NPL, New
Delhi. Paper ID: OP 21
2013
2013
16.Koustav Mondol and A.
B. Puri : Analysis of Overcut and Taper in Micro-Electrical Discharge Drilling on
Ti-6Al-4V
Proc. of the 4th
International Conference on PRECISION,
MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013), 13-15th Dec, 2013,NIT Calicut, Kerala, India, pp 219-225.
2013
2012
17.Koustav Mondol and A.
B. Puri : Analysis of Micro-Electrical Discharge Drilling Characteristics in a Thin
Plate of Ti-6Al-4V
Proceedings of the 4th
international & 25th AIMTDR Conference (AIMTDR 2012), Dec 14-16,
Production Engg. Dept., Jadavpur
University, pp. 1036-1042.
2012
2012
18.S. Barman, Nagahanumaiah, and
A. B. Puri: Investigation on
Shape, Size and Surface Quality of High Aspect Ratio Blind Micro Holes in Die
Sinking Micro EDM
Proceedings of the 4th
international & 25th AIMTDR Conference (AIMTDR 2012), Dec 14-16,
Production Engg. Dept., Jadavpur
University, pp. 1134-1139.
2012
2010
19.R. V. Murali, A. B. Puri and Khalid Fathi: Development and
Application of ANN Model for Worker Assignment into Virtual Cells of Large Sized
Configurations
International
Conference on Modeling, Optimization and Computing (ICMOC 2010), October 28-30, 2010, NIT Durgapur, Durgapur –
713209, India, pp 362 – 367.
2010
2010
20.R.V. Murali, A. B. Puri, K. F. Al-Rahim and G.
Prabhakaran: Comparison of Feed Forward and Radial Basis
Function Neural Networks for Worker Assignment into Virtual Cells
21st
International Conference on Computer-Aided Production Engineering (CAPE 2010),
The University of
Edinburgh, 13-14 April 2010, pp 1-8
2010
2010
21.R. V. Murali, A. B. Puri, and G.
Prabhakaran: GA-Driven ANN Model for worker assignments into
Virtual Manufacturing Cells
International
Conference on Manufacturing Engineering & Engineering Management, WORLD
CONGRESS ON ENGINEERING, June-July 2010, London,
UK. pp
2086-2090.
2010
2010
22.R. K. Padhi, A. J. Banerjee,
H. Chatterjee, A. B. Puri: Multi-response
Optimization of Nd:YAG Laser Welding Using Taguchi Method Based Grey Relational
Analysis
Proceedings of the 3rd
international & 24th AIMTDR Conference (AIMTDR 2010), Dec 13-15,
Andhra University College of Engg., India,
pp 199 – 204.
2010
2010
23.M.S. Azad, A.B. Puri: Simultaneous Optimisation of Multiple
Performance Characteristics in Micro-EDM Drilling of Titanium Alloy
Proceedings of the 3rd
international & 24th AIMTDR Conference (AIMTDR 2010), Dec 13-15,
Andhra University College of Engg., India,
pp 327 – 332.
2010
2010
24.D. Nandi, A. B. Puri and I.
Basak: Path Resistance in Electrochemical Discharge
Machining
Proceedings of the 3rd
international & 24th AIMTDR Conference (AIMTDR 2010), Dec 13-15,
Andhra University College of Engg., India,
pp 247 – 251.
2010
2005
25.Dr.
A. B. Puri and Prof. B. Bhattacharya: A Study on the Wire Lag Phenomenon in Wire-cut Electrical Discharge
Machining Process
Proc. of the 4th
National Conference on Precision Engineering (COPEN-4), 16-17th
December, 2005, Prod. Engg. Dept., Jadavpur
University, Kolkata, India, pp 475-480.
2005
2003
26.A. B. Puri and Prof. B. Bhattacharya: Integrating Wire-cut Electrical Discharge
Machining with Computer Integrated Manufacturing
Proc. of National Conf. on Adv. in Manuf.
Systems, AMS - 03, 2003, Prod. Engg.
Dept., Jadavpur Univ., Kolkata, India, pp 314-319
2003
2003
27.A. B. Puri and Prof. B. Bhattacharya: Robust designing of
Wire-cut EDM Process for Optimum Machining Performances
Proc. of National Conf. on Adv. in Manuf.
Systems, AMS - 03, 2003, Prod. Engg.
Dept., Jadavpur Univ., Kolkata, India, pp 308-313
2003
2002
28.A. B. Puri and Prof. B. Bhattacharya: Analysis of Wire Lag Phenomenal Influence in
Wire-cut EDM for Criterial Optimisation of the Process
Proc.
of 20th AIMTDR Conference, 2002, BIT, Mesra, India, pp 47-50
2002
2002
29.A. B. Puri and Prof. B. Bhattacharya: An
Analysis and Optimisation of Wire Lag along with Cutting Speed and Surface
Finish in WEDM Process
Proceedings of the
Int. Conf. on Manufacturing, ICM 2002, BUET, Dhaka-1000, Bangladesh, 2002, pp
156 – 164
2002
2001
30.A. B. Puri, Dr. B. Bhattacharya and Prof. S. K. Sorkhel: About the Applicability of Taguchi Methodology
for Robust Parametric Design in Wire-cut EDM
Proceedings of the
Int. Conf. on LSCM, PSG College of Technology, Coimbatore, India, 2001, pp
325-329
2001
2001
31.A. B. Puri, Dr. B. Bhattacharya and Prof. S. K. Sorkhel: Estimation of Optimum Machining Condition for
Various Machining Performances in CNC Wire EDM Operation By Taguchi Techniques
Proc.
of National Symposium onManufacturing Engg. in Twenty First Century, IIT Kanpur, 2001, pp 121-124
2001
2000
32.A. B. Puri, Dr. B. Bhattacharya and Prof. S. K.
Sorkhel: Taguchi Method Based Experimental Studies for
Controlled CNC Wire-EDM Operation
Proc.
of 19th AIMTDR Conf., IIT Madras, India, 2000, pp 173-177
2000
Books
ID
Title
Book: Optimisation of Nd:YAG Laser Welding Using Grey Relational Analysis
Book Chapter: Advancements in Micro Wire-cut Electrical Discharge Machining; in BOOK: Non-traditional
Micromachining Processes – Fundamentals
and Applications
Dr. A. B. Puri
Springer International Publishing AG, Switzerland, January 2017.
2.
Book Chapter: Advancements in Micro Wire-cut Electrical Discharge Machining; in BOOK: Non-traditional
Micromachining Processes – Fundamentals
and Applications
Dr. A. B. Puri
Springer International Publishing AG, Switzerland, January 2017.
Patents
ID
Details
Patent Filed Year
Contact
Mobile : +91-9434788051 Email : asitbaran.puri@me.nitdgp.ac.in, abpuri2000@yahoo.co.in
ERP
