Ph. D. on Thermoacoustic Instability from Indian Institute of Technology, Madras on 23.03.2016
Research Interest
Computational Fluid Dynamics and Thermal Science
Thermoacoustic Instability
Nano and Micro Fluidics
CFD on Aerodynamics
Teachings
1. Fluid Mechanics, MEC 303
2. Gas Dynamics and Propulsion , MEE-611
3. Computational Fluid Dynamics and Heat Transfer, MEE 711
4. Engineering Graphics
5. Engineering Mechanics.
UG Students
Data Not Found!
PG Students
Aakas Suran Roll no. 17ME4306
MTech(Awarded)
Aeroacoustics
study on convergent-divergent nozzles and orifice plate for different nozzle
pressure ratios.
Aeroacoustics
Aakas Suran Roll no. 17ME4306
MTech(Awarded)
Aeroacoustics
Aeroacoustics
study on convergent-divergent nozzles and orifice plate for different nozzle
pressure ratios.
Sony Atwal, Roll No. 22ME4302
MTech(Awarded)
Numerical analysis of the
effect of tubercles on the performance of wind turbine airfoil
Aerodynamics
Sony Atwal, Roll No. 22ME4302
MTech(Awarded)
Aerodynamics
Numerical analysis of the
effect of tubercles on the performance of wind turbine airfoil
T. Reddy, Roll No. 21ME4303
MTech (awarded)
Numerical study of the
effect of rectangular and aerofoil lattice members on grid fin aerodynamics
Aerodynamics
T. Reddy, Roll No. 21ME4303
MTech (awarded)
Aerodynamics
Numerical study of the
effect of rectangular and aerofoil lattice members on grid fin aerodynamics
Bahuroju Dileep , Roll No. 21ME4304
MTech(Awarded)
<!--[if !supportLists]-->1. <!--[endif]-->Experimental study on implementation of air
conditioning heat pump in EVs
<!--[if !supportLists]-->1. <!--[endif]-->Heat Transfer
Bahuroju Dileep , Roll No. 21ME4304
MTech(Awarded)
<!--[if !supportLists]-->1. <!--[endif]-->Heat Transfer
<!--[if !supportLists]-->1. <!--[endif]-->Experimental study on implementation of air
conditioning heat pump in EVs
Nilanjan Mandal (Roll no20ME4305)
MTech(Awarded)
Numerical Investigation of
a Circular Shaped Microchannel Heat
Exchanger Performance by Using Nanofluid as a Coolant
Heat Transfer through Micro Channel
Nilanjan Mandal (Roll no20ME4305)
MTech(Awarded)
Heat Transfer through Micro Channel
Numerical Investigation of
a Circular Shaped Microchannel Heat
Exchanger Performance by Using Nanofluid as a Coolant
Subhadip Mondal (Roll No.20ME4310)
MTech(Awarded)
Study of Heat Transfer through Annular
Shaped Micro channel Heat Exchanger using Nanofluid as a Coolant
Heat Transfer through Micro channel
Subhadip Mondal (Roll No.20ME4310)
MTech(Awarded)
Heat Transfer through Micro channel
Study of Heat Transfer through Annular
Shaped Micro channel Heat Exchanger using Nanofluid as a Coolant
Saumya Srivastava ,Roll No:- 19ME4304
MTech(Awarded)
Study of flow past over
grid fins of missiles having different shapes (like concave and convex) and web
densities
Aerodynamics
Saumya Srivastava ,Roll No:- 19ME4304
MTech(Awarded)
Aerodynamics
Study of flow past over
grid fins of missiles having different shapes (like concave and convex) and web
densities
Sukanta Mondal Roll No-19ME4303
MTech(Awarded)
Performance study of Geothermal
Heat Exchanger
Geothermal
Heat Exchanger
Sukanta Mondal Roll No-19ME4303
MTech(Awarded)
Geothermal
Heat Exchanger
Performance study of Geothermal
Heat Exchanger
Vikas Kumar Roll no. 18ME4306
MTech(Awarded)
Effect of solidity and number of blades on
performance of the darrieus hydrokinetic turbine
hydrokinetic turbine
Vikas Kumar Roll no. 18ME4306
MTech(Awarded)
hydrokinetic turbine
Effect of solidity and number of blades on
performance of the darrieus hydrokinetic turbine
Akansa Tewary Roll no. 18ME4314
MTech(Awarded)
Numerical Simulation on triple helix Ground Heat
Exchanger for improving its Thermal performance using nanoparticles
Ground Heat
Exchanger
Akansa Tewary Roll no. 18ME4314
MTech(Awarded)
Ground Heat
Exchanger
Numerical Simulation on triple helix Ground Heat
Exchanger for improving its Thermal performance using nanoparticles
Rupesh Kumar Sahu Roll no. 17ME4210
MTech(Awarded)
Numerical
study of flow through a serpentine duct with two U bends.
Fluid Mechanics
Rupesh Kumar Sahu Roll no. 17ME4210
MTech(Awarded)
Fluid Mechanics
Numerical
study of flow through a serpentine duct with two U bends.
Ravindra Kumar Roll no. 17ME 4301
MTech(Awarded)
Modelling and Simulation of Vortex Tube
Fluid Mechanics
Ravindra Kumar Roll no. 17ME 4301
MTech(Awarded)
Fluid Mechanics
Modelling and Simulation of Vortex Tube
Sanjib Pandit-13/ME/402
MTech (Completed)
"Loss simulation and CFD flow analysis of centrifugal compressor
Computational Fluid Dynamics
Sanjib Pandit-13/ME/402
MTech (Completed)
Computational Fluid Dynamics
"Loss simulation and CFD flow analysis of centrifugal compressor
Ms. Debivarati Sarangi 16/ME/4310
MTech (Completed)
Numerical investigation of conceptual re-entry vehicles with 800/450 double delta wing configurations
Aerodynamic
Ms. Debivarati Sarangi 16/ME/4310
MTech (Completed)
Aerodynamic
Numerical investigation of conceptual re-entry vehicles with 800/450 double delta wing configurations
Ravishankar Mondal
MTech (Completed)
Bifurcation Analysis and Thermoacoustic Instabilities in Rijke Tube
T Thermoacoustic Instabilities
Ravishankar Mondal
MTech (Completed)
T Thermoacoustic Instabilities
Bifurcation Analysis and Thermoacoustic Instabilities in Rijke Tube
Soumen Chakraborty Roll No. 16/ME/4204
MTech (Completed)
Evaluation of the turbulence models for the simulation of the flow over a National Advisory Committee for Aeronautics (NACA) 0012 aerofoil
Aerodynamics
Soumen Chakraborty Roll No. 16/ME/4204
MTech (Completed)
Aerodynamics
Evaluation of the turbulence models for the simulation of the flow over a National Advisory Committee for Aeronautics (NACA) 0012 aerofoil
Monami Deyashi-14/ME/402
MTech (Completed)
“Evolution of Synthetic jets and its heat transfer Enhancements.
Heat transfer Enhancements
Monami Deyashi-14/ME/402
MTech (Completed)
Heat transfer Enhancements
“Evolution of Synthetic jets and its heat transfer Enhancements.
RajesKumar-14/ME/416
MTech (Completed)
CFD and Experimental Investigation on Aerodynamic Characteristics of a sports car with rear wing and spoiler.
Aerodynamic
RajesKumar-14/ME/416
MTech (Completed)
Aerodynamic
CFD and Experimental Investigation on Aerodynamic Characteristics of a sports car with rear wing and spoiler.
Ravindra Kumar Sah Roll No.: 16/ME/4217
MTech (Completed)
Experimental Investigation and Numerical Simulation Of Free Stream Turbulence On Aerofoil.
Aerodynamics
Ravindra Kumar Sah Roll No.: 16/ME/4217
MTech (Completed)
Aerodynamics
Experimental Investigation and Numerical Simulation Of Free Stream Turbulence On Aerofoil.
Shashank Choudhry-15/ME/465
MTech (Completed)
Numerical Simulation of Sloshing analysis in half filled the automotive fuel tank with multiple baffles orientations and numerical study of partially closed knife gate valve using RANS and LES approaches
Heat Transfer
Shashank Choudhry-15/ME/465
MTech (Completed)
Heat Transfer
Numerical Simulation of Sloshing analysis in half filled the automotive fuel tank with multiple baffles orientations and numerical study of partially closed knife gate valve using RANS and LES approaches
Mohnish Kapil-15/ME/476
MTech (Completed)
A 2-D Particle Velocimetry Study of an Incompressible Vortex Ring
Fluid Dynamics
Mohnish Kapil-15/ME/476
MTech (Completed)
Fluid Dynamics
A 2-D Particle Velocimetry Study of an Incompressible Vortex Ring
Mr. Saswath Ghosh - 16/ME/4202
MTech (Completed)
Numerical and Experimental investigations: Flow past a Musa Acuminata (Banana) Tree
Computational Fluid Dynamics
Mr. Saswath Ghosh - 16/ME/4202
MTech (Completed)
Computational Fluid Dynamics
Numerical and Experimental investigations: Flow past a Musa Acuminata (Banana) Tree
Mr. B. Ram Kumar 16/ME/4304
MTech (Completed)
Numerical analysis of shock interactions over double wedge configuration at Mach 2
Aero Dynamics
Mr. B. Ram Kumar 16/ME/4304
MTech (Completed)
Aero Dynamics
Numerical analysis of shock interactions over double wedge configuration at Mach 2
MANISH KUMAR, Roll No: 13/ME/416
MTech (Completed)
Total Pressure Loss Mechanism of Centrifugal Compressor’s impeller and flow analysis in ANSYS FLUENT
Computational Fluid Dynamics
MANISH KUMAR, Roll No: 13/ME/416
MTech (Completed)
Computational Fluid Dynamics
Total Pressure Loss Mechanism of Centrifugal Compressor’s impeller and flow analysis in ANSYS FLUENT
Post-Doctoral Students
Data Not Found!
Doctoral Students
Arunabha Mahato
PhD (Theses Submitted in 2026)
Aerodynamic
<!--[endif]-->A Study on Aerodynamic Performance of Airfoils with Leading-Edge
Tubercles and Vortex Generators.
Arunabha Mahato
PhD (Theses Submitted in 2026)
Aerodynamic
<!--[endif]-->A Study on Aerodynamic Performance of Airfoils with Leading-Edge
Tubercles and Vortex Generators.
Mr. Shambhu Mahato-16ME1101
PhD (completed)
Title of the Work: Study of Heat
Transfer and Flow Characteristics through Twisted Noncircular Ducts using
Nanofluids
Study of Heat
Transfer and Flow Characteristics through Twisted Noncircular Ducts using
Nanofluids
Mr. Shambhu Mahato-16ME1101
PhD (completed)
Title of the Work: Study of Heat
Transfer and Flow Characteristics through Twisted Noncircular Ducts using
Nanofluids
Study of Heat
Transfer and Flow Characteristics through Twisted Noncircular Ducts using
Nanofluids
Mr. Praveen sharma, 15/ME/1107
PhD (Awarded)
Title of the Work: EXPERIMENTAL AND NUMERICAL STUDY OF VIBRATION AND STABILITY ANALYSIS OF
ROTATING SHAFT USING BEARINGS AND LUBRICANTS
EXPERIMENTAL AND NUMERICAL STUDY OF VIBRATION AND STABILITY ANALYSIS OF
ROTATING SHAFT USING BEARINGS AND LUBRICANTS
Mr. Praveen sharma, 15/ME/1107
PhD (Awarded)
Title of the Work: EXPERIMENTAL AND NUMERICAL STUDY OF VIBRATION AND STABILITY ANALYSIS OF
ROTATING SHAFT USING BEARINGS AND LUBRICANTS
EXPERIMENTAL AND NUMERICAL STUDY OF VIBRATION AND STABILITY ANALYSIS OF
ROTATING SHAFT USING BEARINGS AND LUBRICANTS
ASIM KUMAR DAS, 17/ME/1301, PT
PhD (Awarded)
Performance study of 3D S-shaped diffuser
Performance study of 3D S-shaped diffuser
ASIM KUMAR DAS, 17/ME/1301, PT
PhD (Awarded)
Performance study of 3D S-shaped diffuser
Performance study of 3D S-shaped diffuser
RAVI KANT SINGH, 18ME1102
PhD (awarded)
Title of the work: STUDIES ON FLOW PHYSICS OF A VORTEX TUBE
STUDIES ON FLOW PHYSICS OF A VORTEX TUBE
RAVI KANT SINGH, 18ME1102
PhD (awarded)
Title of the work: STUDIES ON FLOW PHYSICS OF A VORTEX TUBE
STUDIES ON FLOW PHYSICS OF A VORTEX TUBE
SOUMYA GHOSH, Roll no. 20ME1502
PhD (Ongoing)
SOUMYA GHOSH, Roll no. 20ME1502
PhD (Ongoing)
CHINMAYEE BEHERA, 25ME1108
PhD (Ongoing)
CHINMAYEE BEHERA, 25ME1108
PhD (Ongoing)
Mr. Pabitra Mandal 14/ME/1504, PT, PhD
PhD (completed)
Title of the Work: An experimental and numerical study of fin pins arranged in an array Date of Registration:......
Experimental and Numerical Investigation of Optimum Orientation of Fin Arrayed Heat Sinks.
Mr. Pabitra Mandal 14/ME/1504, PT, PhD
PhD (completed)
Title of the Work: An experimental and numerical study of fin pins arranged in an array Date of Registration:......
Experimental and Numerical Investigation of Optimum Orientation of Fin Arrayed Heat Sinks.
1. Computational study of a conceptual re-entry vehicle's aerodynamic characterization at Mach number-2 Sarangi, Debivarati and Reddy, M Tharuneswar and Murugan, T and Rana, Subhas Chandra Materials Today: Proceedings
SCOPUS
2026
2026
2. Numerical simulation on triple helix ground source heat exchanger for improving its thermal performance using nanoparticles Tiwari, Akanksha and Rana, Subhas Chandra Materials Today: Proceedings
SCOPUS
Elsevier
2026
2026
3. Effect of vortex generator types on flow over a baseline and tubercle wing sections Mahato, Arunabha and Thangadurai, Murugan and Mandal, Abheek and Rana, Subhas Chandra Physics of Fluids
38(9)
SCI
AIP Publishing
2026
2026
4. Comparative study on thermal performances of ground source heat exchangers Mahato, Arunabha and Singh, Ravi Kant and Halder, Suprakash and Jana, Sasanka and Rao, K Dhanraj and Biswas, Nayel and Ghosh, Srija and Chatterjee, Sushovan and Rana, Subhas Chandra Journal of the Brazilian Society of Mechanical Sciences and Engineering
48(4), pages 295
SCI
Springer
2026
2025
5. Exchanger by Varying the Inlet Velocity of Base Fluid, Water Mahato, Arunabha and Atwal, Sony and Singh, Ravi Kant and Rahaman, Shaik Latheef and Tiwari, Anshu Kumar and Dey, Aditya Narayan and Radhika, Pothula and Chandrika, Chinnari and Rana, Subhas Chandra Recent Advances in Mechanical Engineering: Select Proceedings of FLAME 2024
SCI
Springer Nature
2025
2025
6. Analysis of Symmetrical Airfoil Performance Using Computational Fluid Dynamics Under Varying Flow Mahato, Arunabha and Atwal, Sony and Rana, Subhas Chandra} Proceedings of Fluid Mechanics and Fluid Power (FMFP) 2023, Vol. 2: Fluid Dynamics
SCOPUS
2025
2025
7. Effect of leading edge tubercles on the aerodynamic performance of a symmetrical airfoil at subsonic flows Mahato, Arunabha and Thangadurai, Murugan and Atwal, Sony and Rana, Subhas Chandra Physics of Fluids
37(5)
SCI
AIP Publishing
2025
2025
8. Computational study for the cooling performance and effect of insulation on the vortex tube with different insulating material Singh, Ravi Kant and Pramanick, Achintya Kumar and Rana, Subhas Chandra Numerical Heat Transfer, Part A: Applications
86(2), pages 297--315
SCI
Taylor & Francis
2025
2024
9. Investigating the influence on thermal separation in the vortex tube with flow valve shapes using a computational approach Singh, Ravi Kant and Dubey, Rakesh and Garikapati, Pruthviraju and Shinde, Vinayak Kashinath and Patil, Makrand Milind and Rana, Subhas Chandra AIP Conference Proceedings
SCOPUS
AIP Publishing LLC
2024
2024
10. Impact of Solidity and Blade Count on the Performance of a Darrieus-Type Cross-Flow Water Turbine Singh, Ravi Kant and Dubey, Rakesh and Mahato, Arunabha and Raju, Garikapati Pruthvi and Kumar, Vikas and Rana, Subhas Chandra Biennial International Conference on Future Learning Aspects of Mechanical Engineering
SCOPUS
Springer
2024
2024
11. Study of Thermal Performance of a Helical Ground Source Heat Exchanger by Varying the Inlet Velocity of Base Fluid, Water Mahato, Arunabha and Atwal, Sony and Singh, Ravi Kant and Rahaman, Shaik Latheef and Tiwari, Anshu Kumar and Dey, Aditya Narayan and Radhika, Pothula and Chandrika, Chinnari and Rana, Subhas Chandra Biennial International Conference on Future Learning Aspects of Mechanical Engineering
SCOPUS
Springer
2024
2024
12. Numerical analysis for the thermal performance and flow separation in the vortex tube with different design of flow control valve Singh, Ravi Kant and Mahato, Shambhu Kumar and Pramanick, Achintya Kumar and Rana, Subhas Chandra Journal of the Brazilian Society of Mechanical Sciences and Engineering
46(2), pages 88
SCI
Springer
https://doi.org/10.1007/s40430-023-04660-6
2024
2024
13. Comparative study using renormalized group k-ɛ, realizable k-ɛ, and standard k-ɛ models for flow through S-shaped diffuser Das, Asim Kumar and Singh, Ravi Kant and Gupta, Nakul and Kumar, Amit and Dwivedi, Yagya Dutta and Rana, Subhas Chandra et. al. International Journal on Interactive Design and Manufacturing (IJIDeM)
18(5), pages 3397--3411
SCOPUS
Springer
2024
2023
14. Computational analysis for temperature separation and correlations prediction for dual-inlet-sections vortex tube Singh, Ravi Kant and Pramanick, Achintya Kumar and Rana, Subhas Chandra {Numerical Heat Transfer, Part B: Fundamentals
84(4), pages 465--485
SCI
Taylor & Francis
2023
2023
15. Numerical analysis of temperature separation and exergy analysis of a dual-inlet section convergent vortex tube Singh, Ravi Kant and Pramanick, Achintya Kumar and Rana, Subhas Chandra {Journal of Thermal Science and Engineering Applications
15(7), pages 071007
SCI
American Society of Mechanical Engineers
2023
2023
16. Optimum design of S-shaped diffuser by studying the effect of inlet velocity, turning angle and area ratio Das, Asim Kumar and Singh, Ravi Kant and Roy, Manideep and Kumar, Amit and Rana, Subhas Chandra et. al. International Journal on Interactive Design and Manufacturing (IJIDeM)
17(5), pages 2673--2685
SCOPUS
Springer
2023
2022
17. Study of the impact of flow valve design on the temperature separation in the vortex tube with computational approach Singh, Ravi Kant and Mahato, Arunabha and Pramanick, Achintya Kumar and Rana, Subhas Chandra Conference on Fluid Mechanics and Fluid Power
SCOPUS
Springer
2022
2022
18. Study of the impact of flow valve design on the temperature separation in the vortex tube with computational approach Singh, Ravi Kant and Mahato, Arunabha and Pramanick, Achintya Kumar and Rana, Subhas Chandra Conference on Fluid Mechanics and Fluid Power
SCI
Springer
2022
2022
19. Computational study of temperature separation for a three-dimensional vortex tube with cold exit diameter and nozzle number variation Singh, Ravi Kant and Pramanick, Achintya Kumar and Rana, Subhas Chandra International Journal of Ambient Energy
43(1), pages 7046--7060
SCI
Taylor & Francis
2022
2022
20. Effect of Al2O3/Water and CuO/water nanofluids on heat transfer enhancement flows through twisted clockwise--counter-clockwise square duct Mahato, Shambhu Kumar and Rana, Subhas Chandra and Barman, Rabindra Nath Arabian Journal for Science and Engineering
47(7), pages 8141--8159
SCI
Springer
2022
2022
21. Numerical study of heat transfer enhancement in twisted clockwise-counterclockwise square ducts Mahato, Shambhu Kumar and Rana, Subhas Chandra and Barman, Rabindra Nath International Journal of Ambient Energy
43(1), pages 8087--8097
SCI/SCOPUS
Taylor & Francis
2022
2021
22. Investigation of counter flow vortex tube with insulation and its effects on the thermal performance using a computational fluid dynamic approach Singh, Ravi Kant and Pramanick, Achintya Kumar and Rana, Subhas Chandra Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India
SCOPUS
2021
2021
23. Study of heat transfer enhancement through the non-circular ducts using three dimensional numerical investigations and their comparisons Mahato, Shambhu Kumar and Rana, Subhas Chandra and Barman, Rabindra Nath IOP Conference Series: Materials Science and Engineering
SCOPUS
2021
2021
24. Heat transfer and fluid flow characteristics within non-circular duct Mahato, SK and Rana, SC and Barman, RN IOP Conference Series: Materials Science and Engineering
SCOPUS
2021
2021
25. Experimental and numerical investigation of square heat sink having staggered and inline pin fin arrays placed at different orientation Mandal, Pabitra Kumar and Sengupta, Sayantan and Rana, Subhas Chandra and Bhanja, Dipankar Journal of Mechanical Science and Technology
35(11), pages 5187--5195
SCI
Springer
2021
2019
26. Effect of orientation angle in thermal performance analysis of a horizontal heat sink of perforated pin fins Mandal, Pabitra Kumar and Sengupta, Sayantan and Rana, Subhas Chandra and Bhanja, Dipankar AIP Conference Proceedings
SCOPUS
2019
2019
27. A numerical study of 2-D convective heat transfer of nanofluid (Al2O3/H2O) in a lid driven cavity with square cylinder at the centr Kapil, Mohnish and Roy, Durbar and Sharma, Bishwajit and Rana, SC and Pramanik, S and Barman, RN Materials Today: Proceedings
SCI
2019
2019
28. Aerodynamic characteristics of NACA 0012 vs. NACA 4418 airfoil for wind turbine applications through CFD simulation Kapil, Mohnish and Roy, Durbar and Sharma, Bishwajit and Rana, SC and Pramanik, S and Barman, RN Materials Today: ProceedingsToday: Proceedingsials Today: Proceedings
SCOPUS
2019
2019
29. Numerical analysis of heat transfer and fluid flow through the twisted square duct (TSD): Nanofluid as working fluid Mahato, Shambhu Kumar and Rana, Subhas Chandra and Barman, Rabindra Nath and Goswami, Sohom Journal of Mechanical Science and Technology
33(11),5507--5514
SCI
Springer
2019
2019
30. Aerodynamic Influence of Added Surfaces on the Performance Characteristics of a Sports Car Murugan, T, Kumar Rajesh ,Rana, S., C. et al Thangadurai, Murugan and Kumar, Rajesh and Rana, Subhas Chandra and Chatterjee, Dipankar The institution of Engineers India, Section-C Springer India,pp-1-11
100 (3), 411--421
SCI/SCOPUS
Doi:10.14429/dsj.66.9776
Springer
2019
2018
31. Numerical analysis of heat transfer and fluid flow through twisted hexagonal and square duct and their comparisons Mahato, Shambhu Kumar and Rana, Subhas Chandra and Barman, Rabindra Nath and Goswami, Sohom Chemical Engineering
71,pages 1351--1356
SCOPUS
ISBN 978-88-95608-68-6; ISSN 2283-9216
AIDIC
2018
2017
32. Numerical study of partially closed knife gate valve using RANS and LES approaches S. Choudhary & Rana S.C. International journal of mechanical engineering and technology. Vol 8(5) pp. 432-445
SCI/SCOPUS
2017
2017
33. Immersed Boundary simulation of flow through arterial junctions. Sarkar, D., Upadhyay, N., Roy, S.,& Rana, S., C. Sarkar, D., Upadhyay, N., Roy, S.,& Rana, S., C. Sadhana Vol. 42, No. 4, pp. 533-541
SCI/SCOPUS
2017
2016
34. Recent Development on Synthetic Jets Murugan, T., Deyashi, M., Dey, S., Rana, S., C., and Chatterjee, P., K. Defence Science Journal, Vol 66 (5), pp. 489-498
SCI/SCOPUS
2016
2015
35. Bifurcation characteristics and flame dynamics of a ducted non-premixed flame with finite rate chemistry, Rana, S. C. & Sujith R. I. Combustion Theory and modelling Vol. 19, No.5, 2015 pp. 602-627 Combustion Theory and modelling Vol. 19, No.5,pp. 602-627 2
SCI/SCOPUS
2015
Conferences
ID
Details
Year
Books
ID
Title
Patents
ID
Details
Patent Filed Year
Administrative Responsibilities
1.Warden Hall-2 from 01.07.2003 to July 2008.
2. FIC Workshop from 01.12.2023 to 2025
3. Lab incharge, Hydraulics and Fluid Mechanics Lab from 2016 to 2024
4. UG Coordinator from 01.01.2026
Contact
Mobile : +91-9434788147
Email : scrana.me@nitdgp.ac.in; subhasrana@yahoo.co.in; subhasrana@gmail.com
Miscellaneous
The judge in 2nd Regional Science and Technology Congress (RSTC), Western Region, 2017, as a Chairman and judge on scientific sessions to be held during November 16-17, 2017 at The University of Burdwan
ERP